Question? Once the suction has started would it be better to move the two larger water hoses to the side of the vessel to push the sand into the suction nozzle instead of the way your doing it? Seems to me, using the flow of the water coming out of the hoses to move the sand directly towards, then into your suction nozzle would be faster? The sand will flow or wash much easier than the way it is currently being done? Use the water from all three water hoses in the same area. Use the smaller hose as the breaker into the sand and the two larger hoses as the movers of the sand. Use the two bigger hoses flow working together in a small circular or side to side motion to move the sand into the suction tube. Like I said, it seems to me, by using the force of the water from the hose to move the sand directly towards your suction nozzle will move the sand faster and easier… a side to side or small circle motion of the water hose will increase your efficiency and increase the amount of sand movement into the nozzle or sand pick up. Just a suggestion…
that method is of how they did this was useless and pathetic,i could have unloaded that with a shovel and wheelbarrow myself and did the job faster.Whats wrong with some of these 3rd world countries they still do stuff ass-backwards still even in 2024
এই ভিডিও। আমি এতোদিন চাই ছিলাম
watched same on the Mekong river but boats have suction pumps built in floor of boat but water used as on this video
You correct
Question?
Once the suction has started would it be better to move the two larger water hoses to the side of the vessel to push the sand into the suction nozzle instead of the way your doing it? Seems to me, using the flow of the water coming out of the hoses to move the sand directly towards, then into your suction nozzle would be faster? The sand will flow or wash much easier than the way it is currently being done? Use the water from all three water hoses in the same area. Use the smaller hose as the breaker into the sand and the two larger hoses as the movers of the sand. Use the two bigger hoses flow working together in a small circular or side to side motion to move the sand into the suction tube. Like I said, it seems to me, by using the force of the water from the hose to move the sand directly towards your suction nozzle will move the sand faster and easier… a side to side or small circle motion of the water hose will increase your efficiency and increase the amount of sand movement into the nozzle or sand pick up.
Just a suggestion…
The vessels weight must be maintained laterally. Wet sand on one side only could be dangerous.
Be writing my name in the sand.
What is your name
Some one needs to show what is ha on the shore where it is being unloaded
Yes
How do I get that job? That looks great.
Thanks
Não gostei. Nunca termina a filmagem completa do descarregamento.
Unless you have vacuum assist, it is tough getting NPSH
❤️❤️❤️❤️
I understand. you use the technology that you have and man power is cheap. Gets the job done.
Yes man power is cheap
Nice video. A question: How long time does it take to unload the ship from start to finish?
Regards from Denmark
3.30 hour
Complete and utter waste of time. Better to have a digger on the pier to dig it out.
This is good for sand cutting in our country
An excavator has a much larger chance of damaging the interior of the hull, and can only move the sand 30'. The pump can move the sand over 100'.
Lame
that method is of how they did this was useless and pathetic,i could have unloaded that with a shovel and wheelbarrow myself and did the job faster.Whats wrong with some of these 3rd world countries they still do stuff ass-backwards still even in 2024
This is the effective method of emptying sand in our country
This is the effective method of emptying sand in our country