With the right type of filter, the Adflo PAPR can protect welders from both particles and gases.
ฝัง
- เผยแพร่เมื่อ 11 ก.ค. 2016
- An adaptable system that saves money. With a 3M™ Adflo™ Powered Air Respirator System you selectively replace either the particle or the gas filter as needed: you do not need to change both filters at the same time.
The best Adflo that money can buy!
Lo tengo y estoy encantado! Si inventaran algo para aire fresco en verano y al contrario en invierno sería genial.
I paid over $2000 in Australia for the 9100fx kit with 2 batteries after less than 6 months the automatic dark lense stopped working and had to be replaced,I have also noticed even welding with a hood on my face got burnt because light gets in the top between the plastic and the Kevlar material at top of helmet and also getting light from the bottom......the fresh air is amazing and so much better than having a resperator on all day but the price of the unit and replacement parts is a total joke and after mine breaking after such a short period of time I'm really annoyed.
Same problem waiting for replacement
Just don’t fart . Seriously DONT
:D You might have found another reason for using the Adflo Odour Filter or Gas filtration that are available as accessories ;) Thanks!
@@3MSpeedglas I can vouch for this!
@@PhilipPrentice89 does it really work to block farts ha. The nuisance odour filter that is... ha
@@brutusjb3814 it is very heavy though
How can I know when its time to change the Gas filter?
I want one!
I have had mine for two months now and its my best friend. Best 1700 I have spent. I took the filter assembly apart to clean it, as it sounded like it was getting bogged down. The mesh screen and filter in the back, or the front was indeed dirty, better the filter than I am I right!. How do I know when its time to change the filter? I have been stuck welding brass and I have been noticing its subtle aroma. The filter in the plastic case still looks clean. By the way the optics are AMAZING my boss told me to never weld with my Lincoln hood.
how often do you change gas filter with you use?
How long do batteries last and can you use if you have a beard ???
Watch the video you moron LOL it just told you
Is there a warranty? This is a very expensive piece of equipment. All the models are....
Oh wow this is really cool I been thinking about starting this amazing trade but my parents rose the problem about toxic fumes especially because I had asthma as a kid, so this can largely ruminate toxic fumes from entering your lungs?
oOoOO yes!!!!! I have this system at work...PHENOMINAL!!!! you don't even smell anything
It only works If the filter doesn't leak great !!!!!!!!!new seal!!!!!!!.
I mean cheaper isn't better
Just curious. What happened if you weld without the inner filters?? I think the filters draining the battery life and they're not cheap either
Your lungs are worth the money my friend
Can the gas filter catch the particles, that develop if you weld aluminum, i mean those particles which can cause lung cancer?
Dmitry Levinov Yes
The pre-filter and particulate filter catch the particulate. I use this system for welding wires containing manganese, stainless steels and hardfacing wires which contain hexavalent chromium. The gas filter is for organic compounds like thinners and paints but I use this also as extra protection, plus it doubles as a nuisance smell filter. If the particulate is getting to the gas cartridge it will clog it quickly so you need to keep the filtration in front of it in good condition.
@@alienairguns the paper filter won't catch any fumes its for dust only that's why it's called dustfilter. The gas filter is what you are supposed to use but like you said even if you replace not filters the adflo still shows that the filters are glogged and it's time to replace filters in summon pice of underpowered crap
Guys do you know when it's time to change the Gas Filter?
Cm faço pra comprar tenho uma porém a bateria estragou
Is this similar to the versaflo tr-600 ?? Is one older than the other?
Yes Adflo and TR-600 are similar to each other. Adflo was introduced to the market long before TR-600. Adlfo is specifically designed for welders which TR-600 is not.
@@3MSpeedglas 3m
couldn't give a single f**k about welders...
Can I use this with different welding helmets?
Yes this fits with all Speedglas welding helmets that are prepared for incorporating an active respirator system. For example 9100-Air, 9100 FX-air and 9100 MP helmets. Thanks!
If you 3d print the conector for shure
Where can I buy
How can I know when its time to change the Gas filter?
Hi Alassan, changes should be made on schedule decided from thorough environmental analysis made by health and safety experts since each environment is different. However, if you smell a "break through" of any kind, the filter should be immediately changed out, since that indicates you have used it too long.
@@3MSpeedglas thank you, unfortunately my company doesn't have any schedule yet, it is a metal recycling company and I do oxyfuel cutting outside, primarily steel and other metals sometimes(stainless, etc). Could you give me an average time(examples after two weeks) when to change it in such environment?
From 2:26 min.,whats that?
Now if they only weren't $1600
I bought mine new for $800 on ebay
@@Iceman78izeidk how these people make money with selling these but I got a 9100MP for 700$ New
Will this fit on a 9100XXi???
The 9100 XXi is a welding filter and as long as you attach the welding filter to one of these helmets it will work: 9100 Air- helmet, 9100FX-air helmet, 9100MP-helmet or 9100MP-Lite helmet .
It is the welding helmet that decides if it can be combined with an Adflo PAPR.
What is the name/model of your current welding helmet?
How much does it cost ???
I bought used one for $50 10 years ago. Now people are crazy and want $250 for a used one. I should've bought 10 of them along with helmets years ago, so I could trade them now for a good car LoL.
Can i use gas filter without particle filter?
Hi there! Thanks for your question!
To help us better assist you, please confirm what you are exposed to at work, including the chemicals you are exposed to. We look forward to hearing from you soon.
@@3MSpeedglas hello, thanks. I will do welding using electrodes (mma) with base coating. Maybe some grinding also
Thank you for elaborating on your concern. Please note particle filters are always recommended for welding. We have P100 filters with nuisance OV that filter some gases and vapors. The 2097 P100 is commonly used for welding.
Here is the product link: s.3m.com/09fsfs47 Hope this helps.
170liter is too much for me
i need more than 200liter pls is so hot >D
@@buffed2449 same I want like 300 litres lol
@@buffed2449 si el entorno es caluroso ese aire es el que inyecta a la máscara, estaría bien que inventaran algo para entornos fríos y calientes
I like the system but I don't like the price. $2000+ ... Noooo
Awful aftersales,very,very poor customer care