Hello, please I following your steps, but when I want use Tooling Split, it showing Rebuild Error - Cannot knit sheets together. I dont know what to do.. can you help me?
When you go to create the "Tooling Split", make sure you should have 1 solid body (part) and 3 surface bodies (cavity surface, core surface & surface-trim as parting Surface). Or can you send your file to me? please email to info.eazycad@gmail.com Thank you
id.scribd.com/doc/100932671/Tabel-Penyusutan-Plastik Cek disini 👆. Masing-masing jenis plastik punya nilai susut sendiri. Cara cari scale-nya, adalah = (1+ nilai susut)
Now you can see my video tutorial at the link below (how to draw a water dipper) which I made a product for creating mold in the video above. th-cam.com/video/e6iJmEVbUPw/w-d-xo.html
Saya guna sw premium 2019 dan ikut step by step, tapi di part tooling split error dia kata the parting surface must be larger than the boundary of the sketch..
Terima kasih telah menonton, aemoga bermanfaat. Bahan core-cavity bisa pakai 2311 atau P20. Sedang 1.02 itu diambil yg 0.02 atau 2% nya yaitu bahan PP (polypropylene) original
Thank you for taking the time to put this together, but there's no way to get material into your mold without an injection point and perhaps some venting.
Thank you very much for your video! Very informative and helped me a lot to design my first mold at my work place. THANK YOU!
I'm also designing my very first mold project. This is the first video I've downloaded. It helps a lot. Ex: the combine function
Why the background noise? I thought this was a SW tutorial not a music(sic) video? You fail!!
Could you please add the gate on the cavity block. Thank you for sharing
th-cam.com/video/p5hX-nKyWVE/w-d-xo.html
Please check this video!
nice work
Thanks
Keep it up bro.
Hello, please I following your steps, but when I want use Tooling Split, it showing Rebuild Error - Cannot knit sheets together. I dont know what to do.. can you help me?
When you go to create the "Tooling Split", make sure you should have 1 solid body (part) and 3 surface bodies (cavity surface, core surface & surface-trim as parting Surface).
Or can you send your file to me? please email to info.eazycad@gmail.com
Thank you
alrighty thank you can i get one made by you dierctly for my product ?
Yes, i can
Sir can you tell the system configuration of your pc?
HP Pavilion Sleekbook 14 PC
Intel(R) Core(TM) i3-2367M CPU @ 1.40GHz
Installed RAM 4.00 GB
Ssystem type 64-bit OS
okay!
Kalau membuat mold, bahan yang akan di cetak sebuah plat, berapa scale nya pak?
Tadi kan 1.02, cara tau scalenya brpa dasarnya dari mana?
Terima kasih
id.scribd.com/doc/100932671/Tabel-Penyusutan-Plastik
Cek disini 👆.
Masing-masing jenis plastik punya nilai susut sendiri.
Cara cari scale-nya, adalah = (1+ nilai susut)
@@molding terima kasih pak
👍😃
the background music is the most stupid thing ever
The music is annoying
Party music in the background. Speaker: "Hide the body".
Loving it!
On a more serious note, awesome tutorial!
I don't know why but I laughed when he said: "Hide the body". It felt so illegal :D
Now you can see my video tutorial at the link below (how to draw a water dipper) which I made a product for creating mold in the video above.
th-cam.com/video/e6iJmEVbUPw/w-d-xo.html
Saya kurang paham dengan software ini kalo pakai software blender apakah bisa dibaca Mesin CNC untuk membuat cetakan?
nah kebalikan, sy yg kurang paham dgn software blender. Kl file ekstensinya bisa dibuka di mastercam atau powermill, berarti bisa di proses cnc
I am facing rebuild error in Tooling split. "The parting surface must be larger than the boundary of the sketch"
Check your email
@@molding Thank you
I have te same thing :(
@@fayedegroot3568 give me your email! i will send this file
Saya guna sw premium 2019 dan ikut step by step, tapi di part tooling split error dia kata the parting surface must be larger than the boundary of the sketch..
don't forget to check base geometry at minute 3:40
How can I make 1 core & cavity by assemble different designs of models
In mold toolbar command, only one model can made
This would be much better if you slowed down and explained what/why you are doing things. It's too hard to follow
Thank you for your advice
very nice , ghant in p-unjabi
Why you add background music ?
Because i like music. Learn & fun 😊😊
just wish this was a little slower without music.
Mantap! untuk material core dan cavity bahannya apa ya pak? Ngomong-ngomong shrinkage 1.02 itu dipakai untuk plastik jenis apa ya?
Terima kasih telah menonton, aemoga bermanfaat.
Bahan core-cavity bisa pakai 2311 atau P20.
Sedang 1.02 itu diambil yg 0.02 atau 2% nya yaitu bahan PP (polypropylene) original
Yes
do you have tutorial how to make this water dipper?
I don't have.
But you can see my tutorial about water dipper inb the other model.
Thanks
th-cam.com/video/QT0GkoBGXgI/w-d-xo.html
@Joshua : You can visit in my new update video at
th-cam.com/video/e6iJmEVbUPw/w-d-xo.html
THANK U SO MUCH!
You are welcome
Greetings. Can this software be used for brass gravity casting simulations?
I like this teaching style !!!!
Love you bro for kind work
I read water diaper 😅💀
😀
Good 💪💪
Thank you for taking the time to put this together, but there's no way to get material into your mold without an injection point and perhaps some venting.
yes, need another tutorial for that
th-cam.com/video/p5hX-nKyWVE/w-d-xo.html
Please check this video!
You are so cool Mr!!!
Normally where should be the hole for injection ??
Yes you need another tutorial for that
@@molding I also wonder that. Could you make a video for that and explain how to determine the hole?
@@xiaoyouliang9068 did anyone knew how to make hole for injection
excellent
ماشاء الله
Can I translate this tutorial and use it for my students. of course in you quote as author. Thanks in advance.
yes please
Thank you very much, I am very grateful
Thank you for your tutorial
cara download sw gimana mas ada linknya
Coba cari di igetintopc.com
Nice Sir
Thank you
Thanks
Welcome❤
구독 좋아요 누르고 잘 배웠습니다.금형설계영상 업로드중 입니다.