Are you sure you are connected to L3 and working properly? Our test connection to L3 is invalid, and the bulb will flicker and fail to light up successfully.
there are 2 ways and only a capacitor added to one.the all thing works ok? no problem if the other does not have any capacitor? this is the thing i cant understand .its enough to add a capacitor only for one way?
If there is no neutral wire at home, "N" is not connected, just need to add a capacitor on both sides of the first light, it can be used normally, if the neutral wire is connected, there is no need to add a capacitor
@@moes.official i understand that.in europe we dont have neutral to switch.neutral only for load in the ceiling.but that was my question.in the ceiling are 2 loads conected to 1 N. Capacitor conected N +load 1.load 2 stays like that ,just conected to N?
Thanks for this! I was confused as to what to do with the capacitor, a very helpful guide! ❤
පුදුමයි... එත් ඇත්තයි.... මරු මරු..❤❤❤❤❤
Hi,
Does it possible to conect the yellow transformer to the switch itself?
It must to be on the lamp?
Do you need a shunt capacitor for each lamp?
What are the specifications for this capacitor?
What if you have two lights on the same circuit?
When matter over Thread smart switch with no neutral coming?? still not? We have arrived in March 2024??
Beauty cheers
I have a 3 gang. Does it matter if the capacitor is on L3 instead of L1?
Are you sure you are connected to L3 and working properly? Our test connection to L3 is invalid, and the bulb will flicker and fail to light up successfully.
Can I derectly set in to the switch L,L1 instead of bulb pls tem me@@moes.official
Please give the capacitor specifications
335K 500VDC
Will the wifi light remain on throughout?
You can freely choose whether to light it up or not, and the APP interface can be set
2 lamps . one capacitor only ?
yes!🥳
there are 2 ways and only a capacitor added to one.the all thing works ok? no problem if the other does not have any capacitor? this is the thing i cant understand .its enough to add a capacitor only for one way?
If there is no neutral wire at home, "N" is not connected, just need to add a capacitor on both sides of the first light, it can be used normally, if the neutral wire is connected, there is no need to add a capacitor
@@moes.official i understand that.in europe we dont have neutral to switch.neutral only for load in the ceiling.but that was my question.in the ceiling are 2 loads conected to 1 N. Capacitor conected N +load 1.load 2 stays like that ,just conected to N?
@@gj58dmc Please contact our email, we will have a dedicated customer service to answer your questions
@@gj58dmc services@moeshouse.com
What are the specifications for this capacitor? Please.
What happens if you don’t add the capacitor?
Just wont work
Stops flickering on some led light bulbs too.
Include on a package