Absolutely love this printer, I read lots of reports in pdf format but still like the old-school method of having a 'book' in my hand - - I think I have gone through at least 6 reams of paper and experience no problems, the cost per page is excellent. Just now getting a warning for the imaging drum, but even with it's cost (3x the cost of my last printer's toner) this is a bargain. If I had to complain, I'd ask to add a large capacity paper drawer (4 reams at least), but that is just a minor inconvenience.
@@zheniamu buy this printer, you will fall in love with it. The imaging unit lasts over 10k, the toner lasts forever. I print out my pdf science manuals of 300 to 500 pages. It is a great value.
I have the mfp 1200w. I've reloaded toner kits multiple times before without problems by following the procedure. But recently, my toner level light was depleted by one, but "+1" light was strangely not ON. I inserted the toner but the reload light was blinking amber, not white (usually white when reloading toner). And then I couldn't turn the toner kit to reload it. Nevermind 180 degrees, I couldn't turn it at all. I tried with another kit but the same thing happened. So now I'm down to the last toner level bar (the small one on the bottom and it turned amber), but "+2" light and the warning sign is not ON either. And now the drum light is ON (not blinking) with amber colour while the attention light is still OFF, so it just means that it is out of toner right? But I cannot reload the toner kit since the reload light is amber and not white. I've tried to power reset and factory reset it but nothing has changed. I've contacted the HP support of my country via WhatsApp, they were really trying to help by giving a lot of suggestions but it didn't fix my problem. They recommended that they'll pick up my printer for service but it will take approximately 1-2 weeks to fix. I couldn't afford that much time since I'm in the middle of deadlines. Is there any other way to fix it without having to take my printer to the service center? I would love to hear an alternative to solve my problem. Your response would be much appreciated. Thank you.
+The Games Today वर्तमान में हमारे पास (हिंदी) में जवाब देने के लिए अधिकारी नहीं हैं, लेकिन हमारे पास अनुवादित वीडियो हैं जिनसे सहायता मिल सकती है। विवरण के लिए th-cam.com/video/ycIy8bOSrR8/w-d-xo.html देखें या अधिक सहायता विकल्पों के लिए support.hp.com पर जाएं।
+Gangadhar Reddy You should replace it when your image quality declines and does not improve even after changing your toner. Or simply replace your drum when your printer notifies you to do so. When the replace drum light or message comes on, your printer might stop working without much notice.
Hi. What should i do with my printer. It doesnt turning on. Tried to replace the power cord and change my outlet and did some of the steps on HP Support but none is working for me. My printer is HP neverstop MFP 1200a
+Satyeswar Sharma The printer is in an error state. Reset the printer to resolve the issue. With the printer turned on, disconnect the power cord from the printer. Unplug the power cord from the power source. Wait 60 seconds. Reconnect the power cord to a wall outlet and to the printer. NOTE: HP recommends plugging the printer directly into a wall outlet.
+all subject all jankari thanks for reaching out. The support here is in English only. If you could post back in English, I'd be glad to help? If in case you need support in your language, I'd recommend you to refer our localized channel link: th-cam.com/users/HPSupport
+NAVEEN PRAKASH Please contact our phone support team to fix this issue: Please follow these steps to reach them. Step 1. Open link: www.hp.com/contacthp Step 2. Select the product type. Step 3. Enter the serial number of your device or select let HP detect your product option. Step 4. Select the country from the drop-down. Step 5. You should see the HP phone support number.
One of the worst printer. Have to clean multiple times in a month to resolve print quality issue. Very disappointed buying this printer hp 1200w. Poor quality printing.
Hi there, thanks for contacting! I understand that you are experiencing a print quality issue on your printer. I will do my best to assist you. Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3PoakPg Binu - Social Media Tech Support
Hi Sana, thanks for contacting! I am here to help! What seems to be the issue? Are you facing any technical issues with your HP printer? May I know the printer you are using? Let me know! Binu - Social Media Tech Support
Absolutely love this printer, I read lots of reports in pdf format but still like the old-school method of having a 'book' in my hand - - I think I have gone through at least 6 reams of paper and experience no problems, the cost per page is excellent. Just now getting a warning for the imaging drum, but even with it's cost (3x the cost of my last printer's toner) this is a bargain. If I had to complain, I'd ask to add a large capacity paper drawer (4 reams at least), but that is just a minor inconvenience.
+Timothy Unrine I am glad to know that you are satisfied with this printer.
Hi, have you ever replaced the imaging drum if so after how many reams of paper? I want to buy this printer. Thank you.
@@zheniamu buy this printer, you will fall in love with it. The imaging unit lasts over 10k, the toner lasts forever. I print out my pdf science manuals of 300 to 500 pages. It is a great value.
I have the mfp 1200w. I've reloaded toner kits multiple times before without problems by following the procedure.
But recently, my toner level light was depleted by one, but "+1" light was strangely not ON. I inserted the toner but the reload light was blinking amber, not white (usually white when reloading toner). And then I couldn't turn the toner kit to reload it. Nevermind 180 degrees, I couldn't turn it at all. I tried with another kit but the same thing happened. So now I'm down to the last toner level bar (the small one on the bottom and it turned amber), but "+2" light and the warning sign is not ON either. And now the drum light is ON (not blinking) with amber colour while the attention light is still OFF, so it just means that it is out of toner right? But I cannot reload the toner kit since the reload light is amber and not white. I've tried to power reset and factory reset it but nothing has changed.
I've contacted the HP support of my country via WhatsApp, they were really trying to help by giving a lot of suggestions but it didn't fix my problem. They recommended that they'll pick up my printer for service but it will take approximately 1-2 weeks to fix. I couldn't afford that much time since I'm in the middle of deadlines.
Is there any other way to fix it without having to take my printer to the service center? I would love to hear an alternative to solve my problem. Your response would be much appreciated. Thank you.
+Putri Muthia Please try reloading the toner as mentioned here to fix the issue: bit.ly/3IyhXPY
@@HPSupport the toner does not turn
Hello guys. And the price of the drum kit is??
+Nela You can purchase the part from here: partsurfer.hp.com/ Please select your country and enter serial or product number of your unit.
Thank you very much!!
Mera Er 59 ka problem show krta h..
New drum lagane ke bad...
Whether a spare imaging drum comes in the box.
Is able to print amazon sticky label
Does imaging drum ( HP104A ) come with tonner inside ?
or I have to fill tonner after replace the Drum.
Yes it does come with toner,no need to refill
What is the drum model compatible for neverstop 1200w?
+Enhao Chan You can purchase the part from here: partsurfer.hp.com/ Please select your country and enter serial or product number of your unit.
There are several lines in my image, severely affecting image quality. What's the possible resolution?
+B.S.INDUSTRIES Please refer to the instructions under this document to fix this issue: bit.ly/3fv63dA
Same here , did you fix it ?
I have the same problem, should I just replace the imaging drum?
1005 ka teflon milega kya
+The Games Today वर्तमान में हमारे पास (हिंदी) में जवाब देने के लिए अधिकारी नहीं हैं, लेकिन हमारे पास अनुवादित वीडियो हैं जिनसे सहायता मिल सकती है। विवरण के लिए th-cam.com/video/ycIy8bOSrR8/w-d-xo.html देखें या अधिक सहायता विकल्पों के लिए support.hp.com पर जाएं।
After how many prints we need to change image drum to hp1000w
+Gangadhar Reddy You should replace it when your image quality declines and does not improve even after changing your toner. Or simply replace your drum when your printer notifies you to do so. When the replace drum light or message comes on, your printer might stop working without much notice.
Whether space imaging drum comes along with the purchase of printer
+Arun Yadav In the box only cable is included with the printer.
Hi. What should i do with my printer. It doesnt turning on. Tried to replace the power cord and change my outlet and did some of the steps on HP Support but none is working for me. My printer is HP neverstop MFP 1200a
+May Clarisse Salem Please refer to the instructions under this document to fix this issue:bit.ly/3bwvF8c
Dram price??
+COMMON LIFE You can purchase the part from here: partsurfer.hp.com/ Please select your country and enter serial or product number of your unit.
After refling, the ink level not showing but print is coming. problem is unable to take Xerox . is there any solution.?
+Ashutosh Prabhakar Please download and run HP print and scan doctor from here to fix the issue: bit.ly/3olFych
Can someone help me showing the differences between W1104A and W1144A?
+Frank Pajea Please check the differences here: bit.ly/3sGYqWN and bit.ly/3zfKcyv
I have recently brought my printer now it's showing the imaging drum or toner reload kit error what to do now? Plz help me
+Sai G Please refer to the instructions mentioned under this document to fix this issue: bit.ly/2Z7vgWq
@@HPSupport tq for your reply. it's working
How to resolve the error 30 on display hp nv stop 1200
+Satyeswar Sharma The printer is in an error state. Reset the printer to resolve the issue.
With the printer turned on, disconnect the power cord from the printer.
Unplug the power cord from the power source.
Wait 60 seconds.
Reconnect the power cord to a wall outlet and to the printer.
NOTE: HP recommends plugging the printer directly into a wall outlet.
Hi sir
Hp Never stop laser printer error 30 in the display.what's the problem sir plz help me sir
Never stop printer mein lining bahut a raha hai kaise theek Karen
+all subject all jankari thanks for reaching out. The support here is in English only. If you could post back in English, I'd be glad to help? If in case you need support in your language, I'd recommend you to refer our localized channel link: th-cam.com/users/HPSupport
lining ishu on image
This is Wrost Product printer I have been purchase this printer 10 September 2019 and find the many many problems but service center not provide DOA .
+NAVEEN PRAKASH Please contact our phone support team to fix this issue:
Please follow these steps to reach them.
Step 1. Open link: www.hp.com/contacthp
Step 2. Select the product type.
Step 3. Enter the serial number of your device or select let HP detect your product option.
Step 4. Select the country from the drop-down.
Step 5. You should see the HP phone support number.
I have been purchase printer. But service center not provide odisha.
Purchased 1.5 years back and showing errors/ problems after 1year ,got my drum changed and now scanner not working Showing error 30.
+Vijay Sahni Please download and run HP print and scan doctor from here to fix this issue: bit.ly/3olFych
How to fix ER 35 in hp never stop laser printer
+Prasanthi Nelaturi Please refer to the instructions under this document to fix this issue: bit.ly/2z0YgSD
Worst printer ever from hp . After printing 1600 pages lining on page shown , print quality became third class
+Pro Alien YT Please refer to the instructions under this document to fix this issue: bit.ly/3fv63dA
One of the worst printer. Have to clean multiple times in a month to resolve print quality issue. Very disappointed buying this printer hp 1200w. Poor quality printing.
Hi there, thanks for contacting!
I understand that you are experiencing a print quality issue on your printer.
I will do my best to assist you.
Please refer to the instructions mentioned under this document to fix the issue: bit.ly/3PoakPg
Binu - Social Media Tech Support
Worst printer please don't purchase waste of money
Hi Sana, thanks for contacting!
I am here to help!
What seems to be the issue? Are you facing any technical issues with your HP printer?
May I know the printer you are using?
Let me know!
Binu - Social Media Tech Support
This is worst printer don't purchase
+future link We apologize for the inconvenience caused to you. Could you please elaborate the issue you are experiencing on your printer?