Love your project. Do have a couple of questions. 1) for some reason my Current and Min temps show -196.60F but the Max temp shows the correct temp. This seems to be a problem with chrome and firefox. 2) How could I get it to show each temp sensor instead of the average? Thank you so much
Don't know why but it doesn't connect to my Ip address, and therefore can't connect to the website. I've tried putting my ip address static but that doesn't work. I have a intel galileo gen 1 board with a built in ethernet. I modified a little bit the code so I can use it for my light sensor. Don't know why but I can't access the website even if the code is running fine and the upload is ok. Can you please help me?
I am not familiar with the galileo, but since it has built in ethernet it may have a real mac address. The ethernet shield I'm using doesn't have a mac address, so I just made one up: byte mac[] = { 0x48, 0xC2, 0xA1, 0xF3, 0x8D, 0xB7}; You may need to use the real mac address in that line if there is one for the galileo. Also, I'm not checking the return value for the Ethernet.begin() command. You could try getting the return value into a variable and printing it out to Serial to see what it is. I believe it returns 1 on success and 0 on failure.
You're right that was the problem. Fortunately I realized my mistake in time and now it's working. Thanks for the awesome tutorial and for replying to my comment! A great day to you sir!
Some of you guys have problem with connecting your ethernet shield. Here is some of the reason: 1) Make sure your ethernet cable is working properly and is straight ethernet cable but not cross over ethernet cable. They are different.( I have changed my ethernet cable and then it works!) 2) Make sure the first three byte of your IP address u assign to your ethernet shield is the same as the IP address assigned by DHCP. Look at your computer IP address. If the first three bytes are 192.168.0.xxx, then you must assign the IP address to your ethernet shield with the first three bytes same as 192.168.0.xxx. You cannot assign 192.168.1.xxx. The first three bytes must be the same. The fourth byte can be any value but not the same as your computer or any other device.
I have a video that explains how to write to an SD card (th-cam.com/video/tTp43eLqytA/w-d-xo.html ). The source code is in the description, so you should be able to copy parts of that sketch into your ethernet shield sketch.
I am generating a dynamic web page in this video. You could generate a static web page the same way, or have a static HTML file on the SD card if the ethernet shield has an SD card slot. When a request comes in, you would read the page from the SD card and write the data to the requestor using the EthernetClient object.
please can i have the code for ETHERNET SHILED AND ARDUINO MEGA2560 USING DHT 11 i mean the same project but using ARDUINOMEGA 2560 AND ETHERNET SHIELD AND DHT11 PLEASE
I don't think the code would need to change as long as the ethernet shield is compatible with the mega2560. There is a link to the source code in the description.
oscar guaqueta I'm not familiar with Nagios, but if it can be configured to check the HTTP return code for the status, then it should work fine. If it hits the temperature URL and a 200 code is returned, the status is 'Good'.
Are you using the DS18B20 sensor? If so, you may want to try wiring it up without the ethernet shield and write the values out to the serial monitor. If you are still getting incorrect values then double check your wiring.
Excellent. I find the command to refresh every 5 seconds very useful. 👍
Awesome! Thank you for the tutorial!
Love your project. Do have a couple of questions.
1) for some reason my Current and Min temps show -196.60F but the Max temp shows the correct temp. This seems to be a problem with chrome and firefox.
2) How could I get it to show each temp sensor instead of the average?
Thank you so much
Short and clear, thanks for sharing pal.
How to find device address of sensor as in this video temperature sensor is given and I want to find pir sensor data
how did you do the conection between the shield and the router?
same question
can it use single lm35?
Yes. My sketch has some specific code for the DS18B20 sensors, so you would need to modify it to make it work with the LM35.
how about using lm35
Zaqy Q W That would work fine and would probably be simpler since no external libraries would be required.
i can not compile the code :C
the webpage is not working the program is not creating a webpage what did i do wrong please reply
Don't know why but it doesn't connect to my Ip address, and therefore can't connect to the website.
I've tried putting my ip address static but that doesn't work.
I have a intel galileo gen 1 board with a built in ethernet.
I modified a little bit the code so I can use it for my light sensor.
Don't know why but I can't access the website even if the code is running fine and the upload is ok.
Can you please help me?
I am not familiar with the galileo, but since it has built in ethernet it may have a real mac address. The ethernet shield I'm using doesn't have a mac address, so I just made one up: byte mac[] = {
0x48, 0xC2, 0xA1, 0xF3, 0x8D, 0xB7}; You may need to use the real mac address in that line if there is one for the galileo. Also, I'm not checking the return value for the Ethernet.begin() command. You could try getting the return value into a variable and printing it out to Serial to see what it is. I believe it returns 1 on success and 0 on failure.
You're right that was the problem. Fortunately I realized my mistake in time and now it's working. Thanks for the awesome tutorial and for replying to my comment!
A great day to you sir!
CAN you please tell me how to make changes in code if we wanted to implement the code with LDR?
how do i configure this on a yun? please help me out im a noob ;((
yun shields are pretty easy to play with
Some of you guys have problem with connecting your ethernet shield. Here is some of the reason: 1) Make sure your ethernet cable is working properly and is straight ethernet cable but not cross over ethernet cable. They are different.( I have changed my ethernet cable and then it works!) 2) Make sure the first three byte of your IP address u assign to your ethernet shield is the same as the IP address assigned by DHCP. Look at your computer IP address. If the first three bytes are 192.168.0.xxx, then you must assign the IP address to your ethernet shield with the first three bytes same as 192.168.0.xxx. You cannot assign 192.168.1.xxx. The first three bytes must be the same. The fourth byte can be any value but not the same as your computer or any other device.
hi! can I have a copy of your html codes? it would be a big help :)
+gianrho Sure. I added a link to the source code in the description.
can you please help me how to save the data in sd card. I am using the ethernet shield and Arduino Mega
I have a video that explains how to write to an SD card (th-cam.com/video/tTp43eLqytA/w-d-xo.html ). The source code is in the description, so you should be able to copy parts of that sketch into your ethernet shield sketch.
please do a video of posting data to an online server not a local one. so that the website can be accessed globally.
up
can the ethernet shield host a webpage ?
I am generating a dynamic web page in this video. You could generate a static web page the same way, or have a static HTML file on the SD card if the ethernet shield has an SD card slot. When a request comes in, you would read the page from the SD card and write the data to the requestor using the EthernetClient object.
Simple & Fantastic... Goog Work
Thanks!
please can i have the code for ETHERNET SHILED AND ARDUINO MEGA2560 USING DHT 11
i mean the same project but using ARDUINOMEGA 2560 AND ETHERNET SHIELD AND DHT11 PLEASE
I don't think the code would need to change as long as the ethernet shield is compatible with the mega2560. There is a link to the source code in the description.
can you help me brother
Thanks!
can you make ti work with Nagios monitoring ??
oscar guaqueta I'm not familiar with Nagios, but if it can be configured to check the HTTP return code for the status, then it should work fine. If it hits the temperature URL and a 200 code is returned, the status is 'Good'.
the Arduino wed server is telling me that the temperature is -196.60 F and it doesn't change, it mean is no working properly how can I fix it, please
Are you using the DS18B20 sensor? If so, you may want to try wiring it up without the ethernet shield and write the values out to the serial monitor. If you are still getting incorrect values then double check your wiring.
can i have this coding??
There is a link to the source code in the description.