Good video. I suggest adding a filter and demonstrating the methodology on the discharge to drop THD under 5%. I also suggest making the equivalence circuit model of a motor in a block, and make that the load. I think you would get a lot of views.
Thanks for video very helpfull to understand inverters. Could you please, create new video with real components. mean that actual diode, mosfets, IGBT etc.
@@士凱-g1y If the MOSFET Is High side, you have to provide 5V to the VGS, which Is literally Vg-Vs, a differential voltage. So, you First decide your pulse, then with the gain E you connect both the gate and the source and not the source to gnd, or else the MOSFET won't turn on
@@manoA98A Sorry for the trouble again. I would like to ask how to adjust the square wave generated by the low-pass filter to align with the sine wave. I have adjusted the delay, inductance, and capacitance, but it seems that there is not much change. Once again, thank you. 🙏
![[안방1열 풀캠4K] 베이비몬스터 'DRIP' (BABYMONSTER FullCam)│@SBS Inkigayo 241110](http://i.ytimg.com/vi/AQ4RIghEvUs/mqdefault.jpg)
Good video. I suggest adding a filter and demonstrating the methodology on the discharge to drop THD under 5%. I also suggest making the equivalence circuit model of a motor in a block, and make that the load. I think you would get a lot of views.
would you make a video on 3 phase inverter with one of th soft switching technique like the ARCP
Excellent 👍... could you please make video on 3 phase PFC and input filters using LTspice??
Ok I Will try ✋
Thanks for video very helpfull to understand inverters. Could you please, create new video with real components. mean that actual diode, mosfets, IGBT etc.
Yes
sorry sir, why if i change the switch to MOSFET or IGBT? can i try like you do? please teach me, thank you sir
Sir , can I have the simulation file..
Excuse me, if I want to use NMOS instead of SW to make a single-phase, how should I do it? Is there any tutorial QAQ?
Just substitute the switch with Nmos, select One of the list and then provide enough gate voltage like 5V
@@manoA98A Should the Gate terminal of NMOS be connected to E and then to BV, or is it sufficient to connect it to DC?
@@士凱-g1y If the MOSFET Is High side, you have to provide 5V to the VGS, which Is literally Vg-Vs, a differential voltage. So, you First decide your pulse, then with the gain E you connect both the gate and the source and not the source to gnd, or else the MOSFET won't turn on
@@manoA98A Thank you for your video and your advice
@@manoA98A Sorry for the trouble again. I would like to ask how to adjust the square wave generated by the low-pass filter to align with the sine wave. I have adjusted the delay, inductance, and capacitance, but it seems that there is not much change. Once again, thank you. 🙏
Hello, how can I contact you for a project please
What kind of project?
@@manoA98A design an open loop SPWM
b2:
-- Syntax Error --
if(v(controla)>=v(tri),1,0
Copy this
V=if(V(ControlA)>=V(tri),1,0)
@@manoA98A Thank u, have a good day