I made a 4-wheel bike for my daughter by myself. My goal is to help her have a 4-wheel bike to safely practice riding. Please follow me to see the results.
Из камеры легкового автомобиля вдоль вырежи полоску шириной примерно 3-4 см и длиной около 15-20 см. На одном конце аккуратно в 5мм от края длины проделай поперек полоски ножом отверстие примерно 1 см в длину по центру. С противоположной стороны конец обрежь как крыша двух скатная у дома и на концах скатов от краев прорези до 1 см в центре(это нужно оставить для замка). Потом этот заостренный конец вставь на оси колеса в отверстие прорезанное ранее ножом на другом конце ленты. У тебя должно получится кольцо внутри на втулке колеса. Во время движения оно автоматически будет до блеска натирать втулку и никакой грязи на ней уже НИКОГДА не будет.
Thank you for your review! 😄 I think so too - this design makes control easier, even for those who lack a bit of balance. 🚴♂️✨ I hope it will bring joy and convenience to everyone. Glad you like the idea!"
If you keep the front wheels and only build two rear wheels, you can create a unique model with a special stabilization system. Although the car will not move without a driver, if you design it so that the rear wheels have a stable support system, the car will not fall even when not running.
Oh, I think it's because of the camera angle or the rough road. Thank you for watching the video and for your positive comments. I will review it to improve it.
Hi for another project build a tricycle camper with 6 foot box on back behind seat post with 2 stroke motor in front of seat post with skinny width on 1/2 plywood box like 33 inches wide and 36 inches high with a door on side that has hinges on side and back to open up it would the the answer to the homeless problem rain or shine camper and homeless will be gone in the morning with 10 inch high rack on top. The gov might put an order in for 100 of these to start with maybe 20 inch wheels that can be removed from the side with maybe your 2 wheels on front. maybe live axle on back with 1 cable disc brake with 2 pillow bearings below frame for box on side. and v brakes on front wheel also drive sprocket on that axle.
Your project of building a three-wheeled camper is truly unique and full of potential, especially in solving the problem of homelessness. This is a project that combines mobility, comfort and accessibility for those who need support. I will research and do experiments
Rear axle is nice, however, not supporting much load without som. Framing. While the front axle is just stupid. When you turn, it tilts putting load on the inside tire making it less stable.
I personally hope to bring joy and interesting discoveries to everyone with these homemade products. Thank you for watching and continue to support my TH-cam channel
Девочка довыпендривалась короче. Батя отжал велик и сотворил чучело😂 Ездить на этом явно не стоит. И все на сварку посадить, типа первый и последний раз.
Haha, that sounds interesting! 😄 The girl bragged that the bike was pulled out and turned into a scarecrow, obviously unable to ride! But this is a great example of how the creative process is never simple. Sometimes, you will have to try and fail a few times before finding the right way to do it.
I made a 4-wheel bike for my daughter by myself. My goal is to help her have a 4-wheel bike to safely practice riding. Please follow me to see the results.
Из камеры легкового автомобиля вдоль вырежи полоску шириной примерно 3-4 см и длиной около 15-20 см. На одном конце аккуратно в 5мм от края длины проделай поперек полоски ножом отверстие примерно 1 см в длину по центру. С противоположной стороны конец обрежь как крыша двух скатная у дома и на концах скатов от краев прорези до 1 см в центре(это нужно оставить для замка). Потом этот заостренный конец вставь на оси колеса в отверстие прорезанное ранее ножом на другом конце ленты. У тебя должно получится кольцо внутри на втулке колеса. Во время движения оно автоматически будет до блеска натирать втулку и никакой грязи на ней уже НИКОГДА не будет.
Muito bom, ideal para quem não tem equilíbrio.
Thank you for your review! 😄 I think so too - this design makes control easier, even for those who lack a bit of balance. 🚴♂️✨ I hope it will bring joy and convenience to everyone. Glad you like the idea!"
👍🔥🚲❤
Thank you very much. Please come back to my next videos.
@@HTN_Vegetable 👍🚲🔥
great work and great bicycle thanks my dear friend ❤♥
thank you very much for this encouragement i will appreciate it
Outstanding great job well done 👍👍 and your daughter will make you a richman if you put your idea to good use good luck 😊😊😊😊 🤞🤞
Thank you so much for this wonderful encouragement I hope you will continue to follow and give me more comments
👍🏻
Theo tôi nghĩ bánh trước vẫn giữ nguyên chỉ chế sau hai bánh thôi,xe ko chạy ko người giữ xe vẫn đứng ko bị ngã.
If you keep the front wheels and only build two rear wheels, you can create a unique model with a special stabilization system. Although the car will not move without a driver, if you design it so that the rear wheels have a stable support system, the car will not fall even when not running.
ATV cycle my friend 👍
I am so happy for your great encouragement please come back to my next videos
What was missing, was the little girl riding it at the end like she did in the beginning.
yes that's right i will need to do better in the next video
В любой не понятной ситуации: Вари подшипник!
Сашка Полулях полное собрание сочинений
I don't really understand what you are saying, but I will take these comments and thank you very much!
@@HTN_Vegetable Вы приварили подшипники прямо к перьям. Не делайте так. НЕ НАДО ПРИВАРИВАТЬ ПОДШИПНИКИ. Примерно как-то так.
Глаза!!!😎
You could have stopped with only the 2 frontwheels and made it a tricycle.😊
yes
Good work my friend
oh great to have someone who always supports me thank you i am grateful to youtube for bringing you here with me
Мне кажется что с переди надо делать ось коромысло, для устойчивости.
Спереди там даже на видео видно как бьет руль. И будет бить. Либо вилки ставить амортизационные. Что бы хоть как то идея работала
😂😂😂👋👋👋🇨🇴👍
Why the handle is shaking????
Oh, I think it's because of the camera angle or the rough road. Thank you for watching the video and for your positive comments. I will review it to improve it.
New subscriber you should try make a 5 wheeler tricycle bike
wow what a great idea i never thought of a 5 wheel bike
Hi for another project build a tricycle camper with 6 foot box on back behind seat post with 2 stroke motor in front of seat post with skinny width on 1/2 plywood box like 33 inches wide and 36 inches high with a door on side that has hinges on side and back to open up it would the the answer to the homeless problem rain or shine camper and homeless will be gone in the morning with 10 inch high rack on top. The gov might put an order in for 100 of these to start with maybe 20 inch wheels that can be removed from the side with maybe your 2 wheels on front. maybe live axle on back with 1 cable disc brake with 2 pillow bearings below frame for box on side. and v brakes on front wheel also drive sprocket on that axle.
Your project of building a three-wheeled camper is truly unique and full of potential, especially in solving the problem of homelessness. This is a project that combines mobility, comfort and accessibility for those who need support. I will research and do experiments
Și când vrei sa întorci nu merge😂 ca ai sudat ambele roti pe ax una trebuia sa meargă liber😅
this i need to improve thank you for the advice
Дифференциал нужен. Или обгонные муфты.
Но...
Межколёсная база - маленькая. Конструкция лёгкая. Колёса будут достаточно легко проскальзывать.
Rear axle is nice, however, not supporting much load without som. Framing.
While the front axle is just stupid. When you turn, it tilts putting load on the inside tire making it less stable.
yes that's right i think this version is not good i will make it better if there are more suggestions
επικινδυνες βλακειες
Нельзя все на сварку сажать. Иначе это одноразовое изделие.
I personally hope to bring joy and interesting discoveries to everyone with these homemade products. Thank you for watching and continue to support my TH-cam channel
Девочка довыпендривалась короче. Батя отжал велик и сотворил чучело😂
Ездить на этом явно не стоит. И все на сварку посадить, типа первый и последний раз.
Haha, that sounds interesting! 😄 The girl bragged that the bike was pulled out and turned into a scarecrow, obviously unable to ride! But this is a great example of how the creative process is never simple. Sometimes, you will have to try and fail a few times before finding the right way to do it.