good day po tanong lang po sir maayos na po ba yung L1800 sir yung lang po ba ang problema. meron po ako L1800 no power din 4month old pa lang. nakakatulong yung video mo sir try ko rin gawin sa akin. thank po
I have an Epson L1800 that is performing the way it normally does, but is NOT dropping any ink. I installed a new print head and dampers with no results. I was told that there may be a blown fuse on my motherboard that's causing that to happen. Is that a possibility?
If you cannot on your printer, you can replace all and put the new transistor. if You want to which one is broken please compare between new transistors to the old.
@@MrGoodLife7 Hello! I feel sorry for my printhead. I didn't use it for long. My printhead still work but not good. I clean the printhead by epson driver. But it is not getting better. I continued to cleaning for many time and the life for clean head gone. printerhead stop by printhead driver that set limited to clean printer. We need to buy the software to clean the printhead until the printhead fine.
@@ChanvibolPen Ok i understand ! so if i put it back he's gona burn it again right ? i think with alcool and outside good clean maybe its can work !! or by changine cable !!! what softwar you talking about you mean flash it ?
Hi, I found your video on TH-cam, and maybe you can help me. 2 weeks ago i brought an procolored a3 dtf printer , L1800 , theoretically i have warranty 3 years, but i live in belgium, and it's difficult with the Chinese. Last week monday my printer arrived, Saturday i installed, and because the glue powder didn't arive, i made only 2 prints , that was ok. I cleaned the head, and power off the printer . Sunday arrived the powder glue from Amazon, and i was ready to make my first t-shirt...but surprise, i started the printer, he makes the head cleaning, and after just powered off , and i was not able anymore to power it on. I paid 3000 euro for printer and own, and i made 2 prints...im not very happy. Can you check this 2 videos please. In this video i check the transistors 1-3 and 2-4 th-cam.com/video/YyLfIrAZkVs/w-d-xo.htmlsi=Y4o8MjLYbpKTDy0L And in this one is the video, when i started the printer second time, i don't know why i made it , i had the intention to film all the process how i make the first t-shirt, but stops before to be able to do something. th-cam.com/video/isN_6j_h3ws/w-d-xo.htmlsi=ooAlWS_uLFDT_IQY Thank you !
Great I hope fix my own broken mainboard L1800.Thanks for ur video
Hello. Do you have a diagram of this motherboard? I would be grateful
How did u know if its bad or good? Whats the sign?
good day po tanong lang po sir maayos na po ba yung L1800 sir yung lang po ba ang problema. meron po ako L1800 no power din 4month old pa lang. nakakatulong yung video mo sir try ko rin gawin sa akin. thank po
I have an Epson L1800 that is performing the way it normally does, but is NOT dropping any ink. I installed a new print head and dampers with no results. I was told that there may be a blown fuse on my motherboard that's causing that to happen. Is that a possibility?
I want to see your videos
@@ChanvibolPen Please help me
Can I simply order and exchange a new board or does the firmware still have to be played on it?
@@ChanvibolPen How can I send you the video
my telegram number:+855210185
@@ChanvibolPen Doesn't work from Germany with Telegram
L1800 usb not recognize issue please rell which ic i can prepair the board give me solution
Hey cool video !!!! every thing is bipping how do you know the death one ?
If you cannot on your printer, you can replace all and put the new transistor. if You want to which one is broken please compare between new transistors to the old.
@@ChanvibolPen thanks man ! you put back the old head or i change transistor and head ? thanks man
@@MrGoodLife7 Hello! I feel sorry for my printhead. I didn't use it for long. My printhead still work but not good. I clean the printhead by epson driver. But it is not getting better. I continued to cleaning for many time and the life for clean head gone. printerhead stop by printhead driver that set limited to clean printer. We need to buy the software to clean the printhead until the printhead fine.
@@ChanvibolPen Ok i understand ! so if i put it back he's gona burn it again right ? i think with alcool and outside good clean maybe its can work !! or by changine cable !!! what softwar you talking about you mean flash it ?
@@MrGoodLife7 😁 please put the old printhead. It may not get burn again. if your printer printerhead's cable has no cut.
Bhai mere board me usb port nh utha raha please hal bata dyn
Hi,
I found your video on TH-cam, and maybe you can help me.
2 weeks ago i brought an procolored a3 dtf printer , L1800 , theoretically i have warranty 3 years, but i live in belgium, and it's difficult with the Chinese.
Last week monday my printer arrived, Saturday i installed, and because the glue powder didn't arive, i made only 2 prints , that was ok.
I cleaned the head, and power off the printer .
Sunday arrived the powder glue from Amazon, and i was ready to make my first t-shirt...but surprise, i started the printer, he makes the head cleaning, and after just powered off , and i was not able anymore to power it on.
I paid 3000 euro for printer and own, and i made 2 prints...im not very happy.
Can you check this 2 videos please.
In this video i check the transistors 1-3 and 2-4
th-cam.com/video/YyLfIrAZkVs/w-d-xo.htmlsi=Y4o8MjLYbpKTDy0L
And in this one is the video, when i started the printer second time, i don't know why i made it , i had the intention to film all the process how i make the first t-shirt, but stops before to be able to do something.
th-cam.com/video/isN_6j_h3ws/w-d-xo.htmlsi=ooAlWS_uLFDT_IQY
Thank you !