Looks fantastic, good job mate! A neat little trick I found for when you do the red wash for the face: once you dab it off the wash a little, spray a burst of alcohol from a distance (I have a little pump spray bottle for this). This makes the paint react and it forms into a vein like pattern :)
Great!!! It’s a really good set dude. You can supplement some colours but it does the job for almost all skin types too! Don’t forget to get grimoire purple or a magenta for the glaze!
Yes! Nice one! I just got a GL from Eddys Workshop and was wondering how to paint the clear resin because the clear green had rocks amongst it. Cheers!
I watched the sideshow videos that did the skin tone like that. I havent been successful in doing it with mine yet. But I use most of your techniques! Thanks for the content!
undercoating clear resin can be done by spraying is with a matt varnish.. you'll se the paint will stick like glue.. then you can use a clear varnish once done.. D.
Watched your video on Green Lantern and really enjoyed it. Outstanding work. On his mask you said you wasted a lot of time masking it off with the tape and it still didn’t work well. I’ve seen others use silly putty to mask off quickly. Have you tried that?
Just found this guy. And he is very talented. Just wish he would slow down a bit on the painting tips. But figure if i watch enough videos maybe ill pick up these skills😅
Amazing as always, my friend, Let me ask you something, do you use regular A4 paper to cover the base bottom or do you use some special paper to get that look?
Hi mate is there any chance you could show us how you would paint the Balrog from the March subscription from wicked please. By the way your painting is amazing and your videos are really informative and funny keep up the amazing work
Gorgeous! Amazing talent you have there, sir. Thanks for sharing!
Looks fantastic, good job mate! A neat little trick I found for when you do the red wash for the face: once you dab it off the wash a little, spray a burst of alcohol from a distance (I have a little pump spray bottle for this). This makes the paint react and it forms into a vein like pattern :)
I made a video about that before. Like a few videos back.
I made a video about that before. Like a few videos back.
I ordered the flesh set after watching many of your videos! you're really inspiring! great work!!!
I know, I do the same and I like it a lot
Great!!! It’s a really good set dude. You can supplement some colours but it does the job for almost all skin types too! Don’t forget to get grimoire purple or a magenta for the glaze!
I absolute love printing and painting CA3D models. Every months is a joy. Great job mate. You've made me want to get working on Green Lantern too!
You got some great brush skills. When I paint with a brush, you can see the brush marks
Use thinner paint dude. Needs to be super thin even if you have to do many layers then it will dry flat
Thanks for the shutout! Love your work and I have used your suggestions and yes they work! Thanks again! KR Krueger 😀
It must take not only patience but a love for what you do, and I for one appreciate your commitment. Fantastic job sir.
That's one majestic Green Lantern. Loving the volume of models you paint up. An inspiration, dad.
Thanks dude.
Green Lantern is a favorite of mine, you did an amazing job!
It’s that green magic stuff that got me. I thought this sculpt looked really cool had to do it!
Yes!!! You should do the larfleeze piece wicked did.
Your Dad, you are amazing!!!!
Badass my dude! I resubscribed to pick that model up, need to invest in some clear green resin now 😄
F-ing amazing 🤩 thank you for sharing your techniques
Looks freaking AMAZING!!
Great job dad! Mum will be proud.
Amazing work
Dude, your videos are amazing, keep the great/amazing work!
Thank you I will try to keep up haha
Yes! Nice one! I just got a GL from Eddys Workshop and was wondering how to paint the clear resin because the clear green had rocks amongst it. Cheers!
Talented 👌🏿
I watched the sideshow videos that did the skin tone like that. I havent been successful in doing it with mine yet. But I use most of your techniques! Thanks for the content!
Another great video, Dad!
Love watching a genius and master at work, thx for sharing your work. Also your content is very entertaining 🙌
Commenting to support the video in the channel as I watch the backlog of the catalog videos be well be you
Awesome job, dude. thanks for the great video.
Nice, I reckon Ethan Van Sciver would love it! Congrats on 20k!
Best statue so far
the face is next level!
Thanks
Great video! After all this time, I’m still learning something out from every single of your videos!
Great Job!
Thanks dad awesome vid
undercoating clear resin can be done by spraying is with a matt varnish.. you'll se the paint will stick like glue.. then you can use a clear varnish once done..
D.
Nice job!!!
So good ! Great job man
Great video
Thank you!
That should look great next to the female Green Lantern that you previously did.
Keep rocking Dad! I take out the trash and feed the algorhyms already.
Can I go to paint?
Yes off you go now haha
The question here is how do you get those perfect prints? Amazing job
I speak nicely to the machines…
Sick cap
Awesome!!
Show de bola, lanterna verde 🎉
Watched your video on Green Lantern and really enjoyed it. Outstanding work. On his mask you said you wasted a lot of time masking it off with the tape and it still didn’t work well. I’ve seen others use silly putty to mask off quickly. Have you tried that?
Incredible work!!! Where do you get the pictures for the bottom of the base?
I just print it on normal paper
@@Groundeffected was there a particular website. They look really cool.
Hei, Awesome videos. I am catching up with them and having a great time. Can I ask how do you thin the Galeria Acrylic medium for airbrush?
Toujours un très bon travail.. super idée l'image sous la base . Ou peut on trouver ce genre d'image et sur quoi vous l'imprimé...👍👍
Hey Dad, great work. How did you print the green light construct parts of the base and hands?
It’s just transparent green resin from nova 3d
Hello,
How would you upscale the 1/6 to a 1/4 scale?
Just found this guy. And he is very talented. Just wish he would slow down a bit on the painting tips. But figure if i watch enough videos maybe ill pick up these skills😅
Gotta support my dad and drop that like!
Squeaky chair squeaky chair algorithm algorithm squeaky chair
Awesome work as always. What transparent resin did you use? And did you tint it or use a green one?
Nova 3d transparent green.
Amazing as always, my friend, Let me ask you something, do you use regular A4 paper to cover the base bottom or do you use some special paper to get that look?
Hi, you do an excellent work. How tall are the figures you make?
1/6th scale mostly
Hi mate is there any chance you could show us how you would paint the Balrog from the March subscription from wicked please. By the way your painting is amazing and your videos are really informative and funny keep up the amazing work
Top
Here is one for the TH-cam takeover, Your Dad
Excellent 👍🏻
67 models a month!?! 😅
No you are your dad 😂