I've installed at least 200 double box cranes in my 7 years of working for Canada's largest crane manufacturer, Kavert Cranes and Kone Cranes in Edmonton Alberta and this crew did a great job....
Fun work. I've put up about 14 or so Zenars like this one. Put two of them up in Michigan, that had a trolley with a rail on it for another 360 degree rotation trolley.
Overall, this is a highly informative and enjoyable video for anyone interested in eraction. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
The test weight system is pretty cool, we had to truck all the weights in and it took up lots of room, this water system seems like the most efficient way...
If the crane(s) new or old don't already have Variable Frequency Drives, (vfd's) have them put in. It turns a jerky jeep into a smooth running Buick. If they have them in already, have them turn the speed down. FYI... You can actually add an anti-swing function to some vfd's, if it's that big of an issue. You can tell if they're installed if you can hear the motors engage. Listen for a high pitched whistling type sound. If you have that, you have a vfd.
I agree, installed cranes for years but think the swing was pretty tight for the end trucks on not sure if there was room on the left side to swing over to account for the end trucks not hitting the right side wall a2 + b2 = c2
We use to bolt up endtrucks on B girder as it was still on truck . Then rig with chains and comalong so we could set all three components in one lift then send up A girder to bolt up. Seems faster and safer.
I don't think there was a enough room for swing on this crane side to side, but yes I would agree ive done the same thing you mentioned many times...Also bolted it all together and put all the buzz bar on and lifted it all in one lift many times before as well...
Very good video, and very good and safe work !. We will be installing a large two girder o'head crane soon, we would like to ask you some questions, would you be able to help ?
Where and when did you work for Kone Cranes, I worked for Kone in Leduc Alberta in 2007 or 2008 and for Kavert Cranes for a few years as well in Edmonton Alberta
+杨真真 Yes Hoosier Crane supplies spare parts for all major brands of overhead cranes and hoists. We will work on just about any overhead cranes system and have the ability with the help of partners in the industry to reverse engineer and upgrade all mill duty and process cranes. If you need something quoted please visit www.hoosiercrane.com/rfq
@@carlosrondansanchez6226 buenas estimado, pregunté eso porque estaba diseñando un pórtico similar en ese entonces. Mis rieles me salieron de 2 pies de peralte, teniendo entre 8 y 9 metros de luz entre columnas y entre pórticos poco más de 20 metros. Saludos cordiales Psdt: No sé de qué trocha me estará hablando, tampoco entiendo que le suma al tema principal. Cuídese
@@ZenDNewtz buenas tardes estimado, discrepo de UD, luz es la medida que existe de un eje de riel a otro , eso a lo concerniente a traslación longitudinal. Y la trocha es la medida que existe entre riel y riel dónde va el polipasto, evidentemente que si es un puente biviga, no aplica para monovigas. Por eso hice el punto y discrepo de usted , todo suma. Saludos cordiales y éxito en tu proyecto
We will be buying a Hoosier crane within a few years only because they did not use heavy metal as a background music for this video like every other hyper toxic masculine machinery manufacturer.
+Linda Su Yes we can supply Festoon Cabling systems and Power Bar Systems. We primarily supply Duct-O-Wire and Conductix Wampfler systems, but have access to other lines.
PUT UP MANY OF THESE OF VARIOUS SIZE / CAPACITY....99 % WE PUT THE END TRUCKS ON ONE GIRDER AND RENDER THE CHOKERS TO LEVEL OUT THE LOAD AND IT IN ONE PC
We typically will rent from Water Weights for load testing over 30 tons and up. We have our own weights fro lighter load tests. www.waterweightsinc.com/en/
How can you be sure the water test weights are accurate? I have myself tested Demag cranes for some time now in UK, We always use Cast Metal Blocks, Even when testing 100 ton! They come 8 ton blocks and are designed to be stacked!
We also use metal blocks for smaller loads or in local markets. This was several hundred miles away and there were not options to rent traditional weights locally. Water weights ship @ about 2% of the test weight when empty. As for accuracy this is from their website: "The load is always measured accurately with a certified loadcell or flowmeter, so exact weight variations required during test is always achieved by simply filling or dumping the bags."
So many accolades. Undeserved. No correction to the first snatch. Proceeds with off center lift. Cables on sharp corners. 👎 Sudden lifts, with no gentle test lift. Obvious lack of communication to / with the hitchers. Banged into the roof opening. And then glanced past the edge with the hook. This is disgracefull. Riggers are supposed to be flawless. Why. Because so much is at risk. Is this the best you can do?
Is this how contracts of milllions of dollars are made? Some Indian with a picture of himself on some farmland asking with more bad than good grammar for 10 overhead cranes? Lol
lotsofotherstuff You are correct, we have built many cranes with much large capacities than this. This crane was quite large for a 40 ton crane. It was designed for continuous mill class duty and has a long span. We have built cranes 3 times this capacity and service some cranes that have 160 ton capacity. www.hoosiercrane.com/overhead-cranes
![[Watch Party] APL 2024 ใครชนะเข้ารอบ Hydra 🆚 Flash Wolves Talon 🆚 GGLive](/img/n.gif)
I've installed at least 200 double box cranes in my 7 years of working for Canada's largest crane manufacturer, Kavert Cranes and Kone Cranes in Edmonton Alberta and this crew did a great job....
Fun work. I've put up about 14 or so Zenars like this one. Put two of them up in Michigan, that had a trolley with a rail on it for another 360 degree rotation trolley.
I was with Kaverit for 14 years until the buyout mate?
Manufactured and installed bridge cranes for 2 years. ..loved it
It takes some big balls to install a crane like that!
Not really. My balls are pretty average.
Overall, this is a highly informative and enjoyable video for anyone interested in eraction. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍
Great job & nice music!
good work guys. looks awsome
C'est un bon travail 10/10
The test weight system is pretty cool, we had to truck all the weights in and it took up lots of room, this water system seems like the most efficient way...
tak to je super taky jsem montoval jeřáby a taky vyráběl po celé republice ale i v cizině
Very nice thank you for sharing the video was well done as well. Seemed very safe and efficient
We just got a new one of these at work, its awesome! Having trouble countering swing though.
Get them to back off the brakes a bit then adjust operation..
contact if you required new eot crane, on 9888883211.
If the crane(s) new or old don't already have Variable Frequency Drives, (vfd's) have them put in. It turns a jerky jeep into a smooth running Buick. If they have them in already, have them turn the speed down.
FYI... You can actually add an anti-swing function to some vfd's, if it's that big of an issue.
You can tell if they're installed if you can hear the motors engage. Listen for a high pitched whistling type sound. If you have that, you have a vfd.
thanks for upload this video
In Norway we are only 1-2 persons for installing a crane 😁😁😁
I used to operate one similar to this one building Electrical Transformers it had a cab though.. it was a Shaw-Box with a 40ton capacity.
Mobile number
I have installed cranes for 40 years and always fixed the end trucks on the floor first . There is enough room up there to turn it in place.
I agree, installed cranes for years but think the swing was pretty tight for the end trucks on not sure if there was room on the left side to swing over to account for the end trucks not hitting the right side wall a2 + b2 = c2
there's gotta be a testicle/test vessel joke in there somewhere...
looks like a fun job to have!
Nice work
Helpful for my exam..How much time did it take to whole set up?
We use to bolt up endtrucks on B girder as it was still on truck . Then rig with chains and comalong so we could set all three components in one lift then send up A girder to bolt up. Seems faster and safer.
I don't think there was a enough room for swing on this crane side to side, but yes I would agree ive done the same thing you mentioned many times...Also bolted it all together and put all the buzz bar on and lifted it all in one lift many times before as well...
Excellent 🏁😊
Nice job👍
Nice video.
Nice Job
great video tks
Good job
That's a baby, I put up a 250 ton submarine crane in sc
good video.
Ну великолепный монтаж, с соблюдением норм безопасности.
Это Штаты, там может быть разрешено по другому.
learn something from this video, thanks!!..
tükür babanın suratina
Amazing
Yes a western wet brake on the hoist !!!!!!
Very good video, and very good and safe work !. We will be installing a large two girder o'head crane soon, we would like to ask you some questions, would you be able to help ?
Good work we are also do as same work
But your safety conditions is very good
Nice one
Nice to see this
Plz upload videos eot cranes total mechanical maintenance
천정크레인및골리앗이라 하는되요 영상감사합니다
Nice vedio !
Nice spellink
All festoon, no duct-o-bar, no pickup shoes, no no carbon brass shoes to replaced, bet they have VFD's and remotes on it too. Nice
great job
Ahmad rajja
Caren opretar Ahmad raza
Did this many times for Kone crane . Knuckle boom truck works much better .
Where and when did you work for Kone Cranes, I worked for Kone in Leduc Alberta in 2007 or 2008 and for Kavert Cranes for a few years as well in Edmonton Alberta
BALLS!!!
Super
Do you supply all crane spare parts? Such as wheel, hook, drum etc.
Produce by yourself or buy from others?
+杨真真 Yes Hoosier Crane supplies spare parts for all major brands of overhead cranes and hoists. We will work on just about any overhead cranes system and have the ability with the help of partners in the industry to reverse engineer and upgrade all mill duty and process cranes. If you need something quoted please visit www.hoosiercrane.com/rfq
Did that guy just walk under a suspended load?
Wow!!
நன்றி
informative
Very nice work ,
But can I left and fix the two end carriages first then left and install the two girders of the double GIRDER after ?
you can contact me for more details
a2 + b2 = c2 I don't think there was enough room for swing or I'm sure they would have
thanks
call me
Is there any openings for overhead crane service engineer
How the gantry track is provided, is it a continuous welded rail or 10-12 meter joined with fish plates??
Usually a pass is just made at the joint and a grinder is used to flatten it..rail comes in 50 foot lengths and cut to fit when needed
Excellent teamwork and the video was top-shelf too. What is the safety factor used in the water test? 1.3 ? Great music !!!
10% when i was doing them. Deflection was one over 500 of the beams width......around 10 to 15 mm on something like this.
It has to be greater than 1.0 but cannot exceed 1.25 per OSHA and CMAA #70
same as in Australia for Kone Cranes.....😊
ممكن معرفة وزن الحمل اللي رفعه الكرين لغرض الاختبار
good
I need more video
I had no idea Godzilla's balls weigh 40 tons.
Info lowongan dong untuk operator crean operheatd
Fruchey loaded!!
Si vous ne vous trompez pas d'unités de mesure, tout va bien....
Which type of section is used in gantry girder?.Is it I section or channel section?
We used to use flat steel with gussets full length and welding was submerged arc full length.r
Even cranes get blue balled
Bravo❤❤
So ein Haufen Stahlbau Schlosser?
40ton ke pure sut bataiye video me kaya kaya lagata hii
Indore engineering. Works
Who else thought that was the biggest set of balls?
Instalasinya ngeri.. geser sedikit aja selesai tuh yg dibawah..🙄🙄
To. Many people. All you. Need 3 I use install cranes end fabricated
De cuánto es la luz de la viga principal y cuánto es la distancia entre las columnas?
Para que necesitas saber eso, acaso eres calculista.
De cuánto es la trocha ?
@@carlosrondansanchez6226 buenas estimado, pregunté eso porque estaba diseñando un pórtico similar en ese entonces. Mis rieles me salieron de 2 pies de peralte, teniendo entre 8 y 9 metros de luz entre columnas y entre pórticos poco más de 20 metros.
Saludos cordiales
Psdt: No sé de qué trocha me estará hablando, tampoco entiendo que le suma al tema principal. Cuídese
@@ZenDNewtz buenas tardes estimado, discrepo de UD, luz es la medida que existe de un eje de riel a otro , eso a lo concerniente a traslación longitudinal. Y la trocha es la medida que existe entre riel y riel dónde va el polipasto, evidentemente que si es un puente biviga, no aplica para monovigas.
Por eso hice el punto y discrepo de usted , todo suma.
Saludos cordiales y éxito en tu proyecto
We will be buying a Hoosier crane within a few years only because they did not use heavy metal as a background music for this video like every other hyper toxic masculine machinery manufacturer.
you can contact me +8618866883799 Crane manufacture
Como pueden estar bajo carga 💨
35 ton 14305 mitar poraj
How much pls?
Anu po Ang problem Ng overhead crane umiingay po yung gulong plss help the problem
do you produce the Festoon Cable system and Conductor Bar System?
+Linda Su Yes we can supply Festoon Cabling systems and Power Bar Systems. We primarily supply Duct-O-Wire and Conductix Wampfler systems, but have access to other lines.
+Hoosier Crane Could you tell me your email and mobile phone number?
ะ
Hoosier Crane please provide me some details that i can help in my service industry.
this is crazy im serious
1:27 Beam me up Scotty.
pramod yadav
Sar ekvideo intarviyu kidalo sa
NO ENTIENDO EL MOTIVO POR EL QUE NO ARMAN EL PUENTE GRUA EN EL PISO, PARA DESPUES ELEVARLO...POCO PRACTICO
5'0 ton yas kaws vfd drive crain and vfd maintanance
I need this file, can you send it to me?
PUT UP MANY OF THESE OF VARIOUS SIZE / CAPACITY....99 % WE PUT THE END TRUCKS ON ONE GIRDER AND RENDER THE CHOKERS TO LEVEL OUT THE LOAD AND IT IN ONE PC
a2 + b2 = c2 swing radius is to wide i think or they would have done it Im sure...1 inch or half a inch makes a world of difference 30 feet in the air
Where can I buy the load for testing crane from 10 to 100 ton? Help help help, please!
We typically will rent from Water Weights for load testing over 30 tons and up. We have our own weights fro lighter load tests. www.waterweightsinc.com/en/
How can you be sure the water test weights are accurate?
I have myself tested Demag cranes for some time now in UK,
We always use Cast Metal Blocks, Even when testing 100 ton!
They come 8 ton blocks and are designed to be stacked!
We utilize Water Weight brand. www.waterweightsinc.com/en/contact.html We typically will rent the weights.
We also use metal blocks for smaller loads or in local markets. This was several hundred miles away and there were not options to rent traditional weights locally. Water weights ship @ about 2% of the test weight when empty.
As for accuracy this is from their website: "The load is always measured accurately with a certified loadcell or flowmeter, so exact weight variations required during test is always achieved by simply filling or dumping the bags."
Supar eraiction
Crane ka full form
em coi rồi nhé
The wire rope is damaged no good lifts
So many accolades.
Undeserved.
No correction to the first snatch.
Proceeds with off center lift.
Cables on sharp corners. 👎
Sudden lifts, with no gentle test lift.
Obvious lack of communication to / with the hitchers.
Banged into the roof opening.
And then glanced past the edge
with the hook.
This is disgracefull. Riggers are supposed to be flawless. Why.
Because so much is at risk.
Is this the best you can do?
I paint them kone cranes in htown....
1:19 Does that guy walk right under the beam?
Ronald Carter, he does twice.
I think he did it because the trailer was still mostly under it, but it’s still stupid.
WoW :D !
How a Big Crane With this Weight !!
6:24 Apparently Godzillas ballsack weighs 40 tons.......... Impressive 🤔
plus 10%
im looking for 30 -40 tonne overhead crane .actually l want ten overhead crane
We would be happy to provide you with an estimate for your cranes. You ca submit an RFQ here www.hoosiercrane.com/rfq
Is this how contracts of milllions of dollars are made? Some Indian with a picture of himself on some farmland asking with more bad than good grammar for 10 overhead cranes? Lol
Holy shit thats a big crane
***** Its really not. Its bigger than some, but smaller than a lot.
lotsofotherstuff You are correct, we have built many cranes with much large capacities than this. This crane was quite large for a 40 ton crane. It was designed for continuous mill class duty and has a long span. We have built cranes 3 times this capacity and service some cranes that have 160 ton capacity. www.hoosiercrane.com/overhead-cranes
5:45 pushing the bridge by aerial platform??? Strange
Common method
Done it many times before, or just take the motors off the end trucks and push by hand
somebody please enlight me, wht are those pair of sacks?
6:30 xD
Over head Crain traning kar na hai to Kolkata ka no & training centare kha hai.please send me contact no.
We make 100ton
Mobile number
I want work for You :)
www.hoosiercrane.com/careers