*Please note at time 39:18, the equivalent time duration (time for the pressure to return to ambient/zero) for the side walls and roof should be set to 23.31 ms rather than 21.8 ms. The downloadable PowerPoint slides and RFEM model have been updated to reflect this change. www.dlubal.com/en-US/support-and-learning/learning/webinars/002321
You welcome, i have a question i have noticed at time 38:20 that the multiplir(pressure) doesn't have a unit, not also shown at the unit and decimal places, i am using metric, so i have some trouble especially with angular frequancy column at natrual frequancies tab (table 5.1.B) like i have it starting from angle 383 until 3600 rad/s ! @@DlubalEN
Hi, Mhmd! The multiplier is always unitless regardless if using metric or imperial. This value will simply be multiplied by the load case associated with the time diagram applied. Therefore, whatever units you have set directly under the load case and applied to the structure will be used along with the multiplier. If you have any additional questions, feel free to send us your RFEM model and questions to info@dlubal.com.
Hi! You can download the structure used in the presentation directly from the webinar web page under "Models to Download". Check out the following link: www.dlubal.com/en/support-and-learning/learning/webinars/002321
Hi, MIMI! You can download a free 90-day trial version for all our programs from any location! www.dlubal.com/en-US/downloads-and-information/free-trial-versions/download-trial-versions
Hi, Roston! You can find the presentation slides as well as the model used in the webinar directly on the Dlubal website with the link below. www.dlubal.com/en-US/support-and-learning/learning/webinars/002321
*Please note at time 39:18, the equivalent time duration (time for the pressure to return to ambient/zero) for the side walls and roof should be set to 23.31 ms rather than 21.8 ms. The downloadable PowerPoint slides and RFEM model have been updated to reflect this change. www.dlubal.com/en-US/support-and-learning/learning/webinars/002321
can we plot the support reactions diagrams of the time history cases
Hi, Sayed! For evaluation you can use such diagrams and plot them into the printout report.
I found a small mistake on the equation at time 18:09, Pr is 79.5 psi instead of 29.5 psi , but the result is correct :)
Hi, Mhmd!
Thanks for letting us know! If we present again in RFEM 6, we will be sure to correct.
You welcome, i have a question i have noticed at time 38:20 that the multiplir(pressure) doesn't have a unit, not also shown at the unit and decimal places, i am using metric, so i have some trouble especially with angular frequancy column at natrual frequancies tab (table 5.1.B) like i have it starting from angle 383 until 3600 rad/s ! @@DlubalEN
Hi, Mhmd!
The multiplier is always unitless regardless if using metric or imperial. This value will simply be multiplied by the load case associated with the time diagram applied. Therefore, whatever units you have set directly under the load case and applied to the structure will be used along with the multiplier. If you have any additional questions, feel free to send us your RFEM model and questions to info@dlubal.com.
Can you share the model file of the building?
Hi! You can download the structure used in the presentation directly from the webinar web page under "Models to Download". Check out the following link: www.dlubal.com/en/support-and-learning/learning/webinars/002321
are the softwares available for download for Europe as well?
Hi, MIMI!
You can download a free 90-day trial version for all our programs from any location!
www.dlubal.com/en-US/downloads-and-information/free-trial-versions/download-trial-versions
Very informative ! Can I get a copy of these slides?
Thanks.
Hi, Roston!
You can find the presentation slides as well as the model used in the webinar directly on the Dlubal website with the link below.
www.dlubal.com/en-US/support-and-learning/learning/webinars/002321
Thank you for sharing
Cheers!