1850s Style How Millions of Engine Nut Bolts made from iron bars

แชร์
ฝัง
  • เผยแพร่เมื่อ 23 ธ.ค. 2024

ความคิดเห็น • 487

  • @robertteap8052
    @robertteap8052 2 หลายเดือนก่อน +142

    Why would you pick up hundreds if not thousands of nut blanks off the floor day after day, one would think that it would of dawned on him to put some sort of a bucket / bin under the shears

    • @jpcaretta8847
      @jpcaretta8847 2 หลายเดือนก่อน

      Most are inbred ! Look at the med stat in the UK about gentic deficiencies !

    • @svenp6504
      @svenp6504 2 หลายเดือนก่อน +19

      Stop talking crazy...

    • @scottnunya1
      @scottnunya1 2 หลายเดือนก่อน +11

      Its a job for another person

    • @thebrothers3971
      @thebrothers3971 2 หลายเดือนก่อน +1

      @@scottnunya1 Exactly

    • @chrisgentry2780
      @chrisgentry2780 2 หลายเดือนก่อน +3

      They have nothing to pick up a heavy bin. You would think, though, they would raise the press and install a chute of some kind. Someone from India told me once that they just don’t bother to engineered things because the labor is so cheap.

  • @japfourme381
    @japfourme381 2 หลายเดือนก่อน +63

    Reminds me of when I was a young lad working part time in a small factory in Birmingham, we used to make piston ring clamps and hose pipe clamps, if you were caught talking to someone on the machine next to you, you had a bollocking from the foreman. If you dropped something on the floor you had another, followed with the words, “pick it up son, that’s one less clamp you can make”, I used to earn 2shillings and six pence an hour, the foreman spoke to me one day saying the boss, mr Arthur, has been watching you, and thinks you deserve a pay rise to 2shillings and eight pence an hour. Makes me smile, and brings back some happy memories of my youth!!

    • @rodmills4071
      @rodmills4071 2 หลายเดือนก่อน +6

      Oohhh, you lucky bastard....when I was young lad , I'd get 2 shiling a week . Forman would smack me on back of head just for being there...... I'd guess you know the rest.... I'm an old carpenter, so I can feel your pain . Back in the days when the forman was God and could treat you any way he wanted..... as you say good times though...😂😅😊🇦🇺

    • @davidsmith5094
      @davidsmith5094 2 หลายเดือนก่อน +2

      I'd like to know how long ago that was ?
      Also,,,,is 2 shillings and 6 pence a half crown ?

    • @johnutting9615
      @johnutting9615 2 หลายเดือนก่อน +1

      My god raised to a quid a week,rich kid.

    • @erhardpostinger1326
      @erhardpostinger1326 2 หลายเดือนก่อน

      Wenig tröstlich, dass es den "Siegern" von WWII nicht besser ging, als den Verlierern. Wer da nach dem Jahrgang fragt ist gut beraten, wenn er "Nachkriegsjahre" akzeptiert (selbst bin ich Jahrgang 1940). Inzwischen hat ein Boris es verstanden, das UK (noch mehr) in die Arme der USA zu treiben.
      Seht zu, wie ihr damit zurecht kommt. Zeit für eine neue "Independence" ?

    • @jp325abn
      @jp325abn 2 หลายเดือนก่อน

      talk about machines that were built to last, your great grand-pappy may have working that day. (:

  • @robsmith5912
    @robsmith5912 3 หลายเดือนก่อน +112

    All those flowing clothes around rotating machinery!!

    • @detecting_Nathanael
      @detecting_Nathanael 3 หลายเดือนก่อน +6

      Not much in the way of safety there. No machine guarding at all.

    • @ccahill2322
      @ccahill2322 2 หลายเดือนก่อน

      @robsmith5912, Did you ever question what genius it took to make a "round" bat to hit a "round" ball?

    • @detecting_Nathanael
      @detecting_Nathanael 2 หลายเดือนก่อน +1

      Nope! Because I never saw the sense in a game with a round bat. All of the ones I ever used as a young bloke only had a flat face - and, by the way - it was called Cricket!

    • @ccahill2322
      @ccahill2322 2 หลายเดือนก่อน +1

      @@detecting_Nathanael, "Nope" doesn't see to me characteristic of a gentleman cricket player. But things change "and to every cow its calf" so to speak. By the way, it may surprise you but "Cricket" did not originate in England. Whereas the very start of industrial engineering did. I do believe in "credit where it's due. Even to these poor people doing the best with what they've got at hand. Too many "smart guys" on here pointing out the obvious.

    • @ccahill2322
      @ccahill2322 2 หลายเดือนก่อน

      @@garyb6219So, is it a claim to "superior intelligence" to make things "more difficult?"

  • @davidjohngilbert6295
    @davidjohngilbert6295 2 หลายเดือนก่อน +105

    Imagine doing that all day, 6 days a week. Would drive me nuts.

    • @todaywefly4370
      @todaywefly4370 2 หลายเดือนก่อน +10

      I see what you did there…nuts..😉

    • @danielsee1
      @danielsee1 2 หลายเดือนก่อน +13

      Screw that.

    • @jimt828
      @jimt828 2 หลายเดือนก่อน

      After the first day Id be hanging on by a thread.
      I'd probably say screw this. then bolt out of the place.
      You know the drill.

    • @edubbs3528
      @edubbs3528 2 หลายเดือนก่อน +9

      I'd bolt!

    • @TheSilmarillian
      @TheSilmarillian 2 หลายเดือนก่อน +2

      I would bolt lol.

  • @lonesomelenny7606
    @lonesomelenny7606 2 หลายเดือนก่อน +31

    Wearing sandals, no gloves, eye protection or ear plugs. Respect for their hard work and sympathy for working in a dangerous environment.

  • @KlipsenTube
    @KlipsenTube 2 หลายเดือนก่อน +21

    Slippers and pajamas ... perfect wear for a workshop.

    • @frankangelo7336
      @frankangelo7336 2 หลายเดือนก่อน +3

      Those loose clothes next to that rotating machinery

  • @JohnnyX7-m3m
    @JohnnyX7-m3m 2 หลายเดือนก่อน +24

    Bare feet and hydraulic presses don’t normally go together-but they manage to make all processes work with what they’re given. Very hard working good people.

    • @erhardpostinger1326
      @erhardpostinger1326 2 หลายเดือนก่อน +3

      Das Video erinnert mich an meine Zeit als Schlosser-Lehrling: (die political-correctnes-Mächte werden das auf "Schlosser-Azubi" ändern?) ich war nicht barfuß, aber solange das Loch in meiner Schuhsohle klein genug war, um eine Einlage aus Pappe im Schuh zu halten, solange war es gut.
      Wesentlich: auch in den 1950er Jahren gab es schon genügend Pappe für diesen Zweck.

    • @jjr694
      @jjr694 หลายเดือนก่อน

      Good people, corrupt system. Slavery, and we buy all this stuff on this continent and support the corruption.

  • @oh8wingman
    @oh8wingman 2 หลายเดือนก่อน +11

    When I was 19 I had a job in a factory where they produced multiples of the same item day in and day out. 5000 of this, 10000, of that. All done? We'll bring you some more. It was the most mind numbing backbreaking work I had ever done. I was fortunate when the lead hand noticed I had a gift for working with machinery and setting up the dies they used. I was taken off the line after a while and did nothing but set ups and tear downs. When I walked away from that place I never looked back. I was fortunate enough to have the ability and hunger to do more. Some of those poor fellows spent their entire life working there running the same machines making the same products everyday..........

    • @jp325abn
      @jp325abn 2 หลายเดือนก่อน

      now THAT is the definition of a Socialist worker's utopia.

  • @jackstanton8212
    @jackstanton8212 2 หลายเดือนก่อน +21

    Love the thread tapping sludge -- straight out the river .

    • @jimt828
      @jimt828 2 หลายเดือนก่อน +4

      Hey, lots of oil in those rivers.

  • @TwoHeartedSpider
    @TwoHeartedSpider 3 หลายเดือนก่อน +159

    Throw it on the flor, pick it up. Throw it on the flor again, pick it up again. And so on. 🤦🏻‍♂️

    • @Slide100
      @Slide100 3 หลายเดือนก่อน +22

      It drives me crazy watching these videos. These craftsmen seem able to build anything *except* a table and chairs (there is the odd chair). It would be so much more efficient.

    • @davidjames1007
      @davidjames1007 3 หลายเดือนก่อน

      It amazes me to watch this and makes me realise these people are brain dead

    • @jeh45345
      @jeh45345 3 หลายเดือนก่อน +12

      Lean manufacturing and 5S would do these guys some good. I very much admire their hard work and craftsmanship, but efficiently, they have a lot to be desired.

    • @meastwood05
      @meastwood05 3 หลายเดือนก่อน

      Apparently that's how cheap labor works. ​@@jeh45345

    • @hamilton9479
      @hamilton9479 2 หลายเดือนก่อน +28

      How about putting a bucket or container underneath to catch things instead or repeatedly picking them up off the floor!

  • @brucebaum1458
    @brucebaum1458 2 หลายเดือนก่อน +43

    It’s meant to be inefficient because that provides employment, when I was in India in 1973 the road workers had 2 guys on one shovel, this is how you keep the masses happy, not productive but they all have a little money and aren’t starving to death.

    • @SiteReader
      @SiteReader 2 หลายเดือนก่อน +1

      Thanks for that explanation. It rings true to the old Congress Party development approach.

    • @SiteReader
      @SiteReader 2 หลายเดือนก่อน +2

      Is this India, or Pakistan?

    • @billdeburgh
      @billdeburgh 2 หลายเดือนก่อน +3

      ​@SiteReader
      According to the Arabic writings on the wall I'd say Pakistan.

    • @SiteReader
      @SiteReader 2 หลายเดือนก่อน

      @@billdeburgh Makes sense, thanks. I didn't notice the writing on first viewing (too focused on old machines and dangerously exposed toes, I guess). On second look, I see a few letters--and Arabic numerals as well!

  • @jimmatheson9125
    @jimmatheson9125 2 หลายเดือนก่อน +37

    Boeing certified nuts!

    • @tjm3900
      @tjm3900 2 หลายเดือนก่อน +2

      Better than not fitting them at all !

    • @glasslinger
      @glasslinger 2 หลายเดือนก่อน

      Made from melted down car and refrigerator metal!

    • @billdeburgh
      @billdeburgh 2 หลายเดือนก่อน

      Best comment.

    • @Thomas-j3x8k
      @Thomas-j3x8k 2 หลายเดือนก่อน

      Tell me more about how you know nothing about engineering

    • @cameronlilly4814
      @cameronlilly4814 หลายเดือนก่อน +1

      Boeing supplier?

  • @stevewilson1388
    @stevewilson1388 2 หลายเดือนก่อน +16

    Interesting to see all of that old equipment still running. It's like the industrial revolution never graduated from kindergarten for some of these places though.

    • @jyvben1520
      @jyvben1520 2 หลายเดือนก่อน +2

      some ancient machines, probably steam powered back in the day

    • @Wheelgauge-bt7ox
      @Wheelgauge-bt7ox 2 หลายเดือนก่อน +2

      A lot of those old machines are from United States purchased for scrap prices and shipped to India and all over and still used today👍

    • @edschultheis9537
      @edschultheis9537 2 หลายเดือนก่อน +5

      I suspect that most of those old heavy-duty machines were built for WW-II. Probably, many of them were built in the US to support the wartime effort. The good thing about those machines is that they were built to last. From 1986 - 1989 I was working as a civilian aerospace engineer for the US Navy in Alameda California at the Naval Air Rework Facility. We repaired and rebuilt aircraft. There was a very large machine shop on that naval base, built inside of a huge aircraft hanger. In that shop, we had many WW-II era machines working alongside completely modern, precise CNC (computer numerically controlled) machines. It worked well. We just matched the machining task with the best machine to perform the task. In about 1991 (after the Soviet Union collapsed), that naval base was closed. I suspect that some of the equipment was moved to other rework facilities. But some of that WW-II equipment may have ended up in Indian factories, still being used today. There is still a lot of that old machinery being used in the US today.

    • @billsmith7673
      @billsmith7673 2 หลายเดือนก่อน

      @@edschultheis9537 Interesting!!! Thanks for sharing!

    • @Titus9508
      @Titus9508 หลายเดือนก่อน

      ​@@edschultheis9537Same here in the UK, lots of Empire machinery from railway building etc. still in place. A video elsewhere shows a huge centre lathe in use with 'Birmingham, England', on the casting!

  • @jannenreuben7398
    @jannenreuben7398 2 หลายเดือนก่อน +10

    I don't imagine the health & safety guys are too busy in that place.
    "Boss! Brother Iftikhar has just lost his hand in the nut press!"
    "Allah willed it. Tell him to use his other one. Next!"

    • @dennisshank2715
      @dennisshank2715 2 หลายเดือนก่อน

      That will teach him to use his hand to play with his nuts! He knows he supposed to use the salad tongs! What happened to the salad tongs? I have to use them to make lunch!

  • @susanvaughn741
    @susanvaughn741 2 หลายเดือนก่อน +8

    It amazes me how they use individual production methods to mass produce items.
    I see so many places that they use hands and fingers to do what very small machinery additions can do without risk to life and limb.

  • @MetalworksUnveiled
    @MetalworksUnveiled 27 วันที่ผ่านมา +2

    Love the thread tapping sludge😘

  • @michaelricci9845
    @michaelricci9845 2 หลายเดือนก่อน +3

    As a teenager I worked after school at a factory where lamps were made. It saddened me to learn why some of the time cards had a bent corner or other distinguishing mark. A sizeable number of workers were unable to read even their own names. I continue to be in awe of their determination to be productive. Long ago and far away!

  • @mitchilito99
    @mitchilito99 3 หลายเดือนก่อน +13

    Says a very great deal about the value of life in that society. Or the lack thereof.

    • @peterneumann7145
      @peterneumann7145 2 หลายเดือนก่อน +1

      And yours

    • @jimt828
      @jimt828 2 หลายเดือนก่อน +2

      I'd argue that technologically advanced society's value life less. Even though they protect it more.

    • @darekradulski6213
      @darekradulski6213 หลายเดือนก่อน

      Over 70 million of babies are murdered around the world annually (abortion) that says a lot about value of life.

    • @Titus9508
      @Titus9508 หลายเดือนก่อน

      Yet, your happy to use products from them...

  • @MasterKenfucius
    @MasterKenfucius 2 หลายเดือนก่อน +4

    Ah... life at the sweat shop... touching hazardous chemicals with bare hands, playing with dangerous machines, working day and night, all while wearing slippers and not having a care in the world. I sure don't miss it.

  • @timcarlyle147
    @timcarlyle147 3 หลายเดือนก่อน +22

    These men are not lazy as the rest the world they work hard for the dollar they get n not enough

    • @TexasHeadhunter03
      @TexasHeadhunter03 หลายเดือนก่อน

      watching them continuously pick up material off of the ground, yes thats lazy AF

  • @greggminkoff6733
    @greggminkoff6733 3 หลายเดือนก่อน +69

    What is the IQ of a person who can't figure out how to put a container on the ground to catch the following material?

    • @albybloke2289
      @albybloke2289 3 หลายเดือนก่อน +2

      I only watch these now wondering if I’ll ever see the genius who works it out

    • @laserfloyd
      @laserfloyd 3 หลายเดือนก่อน +2

      Falls under the category of "this is how we've always done it." I mean hey if it works for them. Not the most efficient but it seems to work out in the end. Although, it makes my knees hurt to think about constantly picking stuff up off the floor. 😂

    • @dappy848
      @dappy848 3 หลายเดือนก่อน +1

      Dumb dumb

    • @jcjko5504
      @jcjko5504 3 หลายเดือนก่อน +2

      Because those child are cheaper than a container.

    • @jamesmckay9966
      @jamesmckay9966 3 หลายเดือนก่อน +2

      THEY ARE HARD TO UNDERSTAND .

  • @ancientbriton8262
    @ancientbriton8262 3 หลายเดือนก่อน +12

    Wouldn’t fancy dropping those bunches of long steel bars on my feet, but perhaps those safety sandiest have unforeseen safety features 😮

  • @jyvben1520
    @jyvben1520 2 หลายเดือนก่อน +3

    all about work security, each person has a 'simple' job, many years later the boy becomes the leader ...

  • @MISTERLeSkid
    @MISTERLeSkid หลายเดือนก่อน +5

    Has nobody in that place ever thought of maybe hanging a bucket to simply catch the nuts at each stage instead of manually scooping EVERY ONE of those thousands of nuts off the floor 10 times for every nut produced??? I guess people are worth less than buckets wherever that place is.

  • @larrykostopulos1332
    @larrykostopulos1332 3 หลายเดือนก่อน +14

    Such soul crushing monotony. No safety measures, filthy work areas, no PPE. What grade of steel are the nuts made of? Scary, very scary.

    • @dennisyoung4631
      @dennisyoung4631 2 หลายเดือนก่อน +3

      Probably something similar to about 1025 carbon steel, based on how they seem to be machining.
      There’s enough cold-working to give the resulting fasteners “reasonable” strength, but the nuts are probably somewhat variable in their dimensions…

    • @robertbiondo
      @robertbiondo 2 หลายเดือนก่อน +1

      It's the crap you get at Lowes and HD

    • @dennisyoung4631
      @dennisyoung4631 2 หลายเดือนก่อน

      @@robertbiondo namely, the usual “grade 2” fasteners - soft metal. The ones shown might not even come up to grade 2 levels of tensile and yield strength! (Dimensions, though - they need to have wide tolerances!)
      Grade 5 and (especially!) grade 8 are stronger, with metric 12.9 a bit stouter than SAE grade 8.

  • @BoomerBends
    @BoomerBends 2 หลายเดือนก่อน +2

    The way they're making these is just nuts!

  • @dwightcarlson7136
    @dwightcarlson7136 2 หลายเดือนก่อน +8

    Ok others have said it but why not put a tray below the hex shearing machine to save having to pick up the blanks?

    • @jyvben1520
      @jyvben1520 2 หลายเดือนก่อน

      their way the person for the next step can work his job and when he needs stuff he gets stuff

    • @garyb6219
      @garyb6219 2 หลายเดือนก่อน +1

      They have a tray, for fingertips.

    • @waterboy8999
      @waterboy8999 2 หลายเดือนก่อน

      It's called evolution, they are catching bucket behind other civilizations

    • @vincentcoppola9832
      @vincentcoppola9832 2 หลายเดือนก่อน

      Job security.

    • @Климов-в3э
      @Климов-в3э หลายเดือนก่อน

      В свое время в Европе с появлением машин и мануфактур рабочие устраивали восстания и ломали машины, когда поняли, что массовое производство может лишить их работы и куска хлеба. Здесь примерно такой же уровень. Механизируешь процесс, и половина рабочих лишился средств к существованию. Поэтому они подбирают гайки с пола всю жизнь.

  • @КиримПолтаржицкий
    @КиримПолтаржицкий 3 หลายเดือนก่อน +8

    Как будто фильм "Кин-дза-дза" посмотрел. Или "Трудно быть богом".

  • @rogwinkler1230
    @rogwinkler1230 2 หลายเดือนก่อน +3

    Kids in our society complain if they have to put down their phone and take the trash out. They should watch this.

  • @StringDriver
    @StringDriver 3 หลายเดือนก่อน +7

    It’s hard to believe any work in 2024 is done by hand like this anymore

    • @ccahill2322
      @ccahill2322 2 หลายเดือนก่อน

      @StringDriver, As soon as the genius in Washington blow the ###@@%% the world up you may be lucky (if you survive) to find a couple of these guys still able to make a nut---for the bolt which doesn't exist anymore

    • @GerManBearPig
      @GerManBearPig 2 หลายเดือนก่อน

      Most work is still done by hand even in modern first work countries with access to industrial machines

    • @StringDriver
      @StringDriver 2 หลายเดือนก่อน +2

      @@GerManBearPig guess you gotta ask “why?” I totally understand not automating to keep people employed, but this is borderline dangerous.

    • @jimt828
      @jimt828 2 หลายเดือนก่อน

      We live an a world where 25 % of the population doesn't have access to clean, safe drinking water and over 40 doesn't have adequate sanitation.
      This shouldn't surprise you at all. A large percentage of the world is still going through their "industrial revolution". A lot of the word hasn't got that far yet.

    • @Titus9508
      @Titus9508 หลายเดือนก่อน

      Other countries and cultures exist you know.

  • @paulg444
    @paulg444 2 หลายเดือนก่อน +3

    So, if I understand it, our Congress established a massive OSHA plan to protect US workers from injury and then when global businesses ship manufacturing over seas where workers work in deadly conditions, we allow those products to be shipped back in without batting an eye as long as those global corporations fund the Congressmen.

    • @a.karley4672
      @a.karley4672 2 หลายเดือนก่อน

      I thought that only US corporations were allowed to make donations to Congressmen.
      But yeah - if the product passes QA/QC to suit the buyer, what business of the government is it where one buys one's supplies. Are you some sort of socialist, to demand government regulation of businesses?
      ("Socialist" isn't an insult in this country.)

  • @larryphillips4164
    @larryphillips4164 2 หลายเดือนก่อน +17

    Yall just need some conveyor belts and yall will be all supervising instead of picking this shit up off the floor 100 times…

    • @robertbiondo
      @robertbiondo 2 หลายเดือนก่อน

      Top dog is making his money , he don't gaf .

    • @Kraken4201
      @Kraken4201 2 หลายเดือนก่อน +2

      Sweet then we can pay one person next to nothing instead of 5-10

  • @nicoschadjidemetriou4373
    @nicoschadjidemetriou4373 2 หลายเดือนก่อน +1

    Hard working men with old machines. I admire them .BRAVO. Are they in Pakistan?

  • @sheldoniusRex
    @sheldoniusRex 2 หลายเดือนก่อน +2

    Ahh yes. Good old fashioned safety sandals.

  • @beshmohandes9083
    @beshmohandes9083 2 หลายเดือนก่อน +3

    It's in Pakistan and they still use the old machines back to 1900 or 1950. This people are real craftsmen, I saw that in India & Pakistan. Very good mechanicans (as well as mathematicans).

  • @godfreypoon5148
    @godfreypoon5148 2 หลายเดือนก่อน +12

    It's honestly amazing how efficiently they can turn perfectly good scrap metal into trash.

    • @a.karley4672
      @a.karley4672 2 หลายเดือนก่อน +4

      Where did you get the idea that the initial material was scrap?
      I looked at it - it's not even surplus lengths of construction rebar (which would probably be the wrong grade of steel anyway, which would get rejected as soon as the purchasers got a report back from their inspection lab). It's new-from-the-factory bars of a specified length and diameter.
      If the bars came too long, that chain-driven machine for drawing the bar (diameter X) into hex bar (mean diameter X-something) would reach it's end stop with the bar still protruding from the die. Which probably wouldn't be good.

    • @vincentcoppola9832
      @vincentcoppola9832 2 หลายเดือนก่อน +2

      Not scrap. Those bars have to be precision ground to be drawn through the die at the beginning of video.

    • @Titus9508
      @Titus9508 หลายเดือนก่อน

      Never had a job, have you?

  • @catranger01
    @catranger01 2 หลายเดือนก่อน +11

    Those are not iron bars, they're steel bars.

    • @geoffmorgan6059
      @geoffmorgan6059 2 หลายเดือนก่อน +4

      Fully traceable with heat and lot numbers on file along with lab tests of chemical composition and physical properties. You betcha!

    • @GerManBearPig
      @GerManBearPig 2 หลายเดือนก่อน +1

      It's pure iron though.
      I find it very ironic that engineering calls pure iron without any carbon"steel" and very high carbon content cast iron is "iron"

    • @catranger01
      @catranger01 2 หลายเดือนก่อน +1

      @@GerManBearPig Greater than 2 percent carbon is iron, less than 2 percent carbon is steel. If that was pure iron it would be much to brittle for processes such as drawing and cold forming.

    • @Titus9508
      @Titus9508 หลายเดือนก่อน

      ​@@geoffmorgan6059Bought from a Steelworks. God what a dope.

  • @Sctronic209
    @Sctronic209 หลายเดือนก่อน

    That’s a pretty cool process. Hard workers much respect.

  • @Scubongo
    @Scubongo 2 หลายเดือนก่อน +1

    I can not believe that places like this still exist. Unbelievable. 😲

  • @ThomasMitchell-kr8yy
    @ThomasMitchell-kr8yy 2 หลายเดือนก่อน

    Nice to see your eyes and ears are open and the greatest gift is to be free thinker

  • @rawbacon
    @rawbacon วันที่ผ่านมา

    I don't think the 1850s was this sophisticated.

  • @laserfloyd
    @laserfloyd 3 หลายเดือนก่อน +5

    The flywheels and loose clothing flapping in the wind make me nervous as hell. Godspeed.

    • @dennisneo1608
      @dennisneo1608 2 หลายเดือนก่อน

      That's Islam for you. 😅

    • @Piet9193
      @Piet9193 2 หลายเดือนก่อน

      Don't worry their clothes are probably so worn out it will tear like break-away stripper clothes

  • @augustwest8559
    @augustwest8559 หลายเดือนก่อน

    I like the threading machine the best. I dig the pipes pooping out finished product.

  • @cblse
    @cblse 2 หลายเดือนก่อน +5

    12:11 ! The kid in the long flowing shirt squeezing in between rotating pullies. This is NUTS!

    • @ccahill2322
      @ccahill2322 2 หลายเดือนก่อน +1

      @cbise, Glad you noticed. But it is a NUT factory. Tell Boeing they seem to have been missing some from their doors.

    • @WaveformV1.0
      @WaveformV1.0 2 หลายเดือนก่อน

      They probably don’t ever get hurt either.

  • @PM-fs2eg
    @PM-fs2eg หลายเดือนก่อน

    I like the.."well worn-ness" of the machines, trays etc.

  • @TheTruth-yq2jb
    @TheTruth-yq2jb 2 หลายเดือนก่อน +2

    A little narrative would help a lot. Even computer generated

  • @tednelson5277
    @tednelson5277 2 หลายเดือนก่อน

    Nothing but the best top quality steel toed sandals!

  • @bumpedhishead636
    @bumpedhishead636 2 หลายเดือนก่อน +3

    No heat treatment to harden the nuts?? Hopefully that happens somewhere else...

    • @joeconrad3828
      @joeconrad3828 2 หลายเดือนก่อน +1

      I was waiting for it, too. Odd.

  • @alanpecherer5705
    @alanpecherer5705 2 หลายเดือนก่อน +2

    Probably the 2nd or 3rd most important machine tool in Pakistan is ....the floor.

  • @DennisBocock
    @DennisBocock หลายเดือนก่อน

    Some of those nuts and bolts built America

  • @Toesmack1
    @Toesmack1 2 หลายเดือนก่อน

    Maybe the TH-cam poster could spring for some safety equip for the hard workers. Does seem like management is too interested. Working with antique machinery, these guys still making a usable product. Hard work!

  • @sagittarius_sq4
    @sagittarius_sq4 29 วันที่ผ่านมา +1

    So why aren’t we making some kind of box or device to catch all of the following nuts that are just falling on the floor all over the place? Can we please make a box a catcher for all of the nuts!🛠️

  • @SherriMSDRML-qm1pe
    @SherriMSDRML-qm1pe 2 หลายเดือนก่อน +2

    Thank you 🤠🤖🐎🧲🧲🇮🇳🇱🇷🐉💯

  • @JCAtkeson3
    @JCAtkeson3 2 หลายเดือนก่อน

    The factory sounds are like a drum soundtrack to the video.

  • @gclauter
    @gclauter 2 หลายเดือนก่อน +1

    Melhor que esses made in china de hoje em dia.

  • @harleylif1929
    @harleylif1929 หลายเดือนก่อน +1

    An OSHA inspector would have a heart attack if he walked in that shop.

  • @jp325abn
    @jp325abn 2 หลายเดือนก่อน

    Some may laugh others may criticize but these are the skills and machinery that will be absolutely necessary if/when the shiet hits the big fan.
    (It also doesn't hurt to be able to manufacture an AK-47 by hand.)

  • @colintuffs568
    @colintuffs568 2 หลายเดือนก่อน

    Britain may no longer be able to produce steel but if these workers are able to keep us in nuts and bolts we can continue with the Industrial Revolution 😂😊

  • @KirtFitzpatrick
    @KirtFitzpatrick หลายเดือนก่อน

    Can someone explain to me how the nuts drop off the tap at 15:44 to 16:05? I can't for the life of me figure out what sorcery is going on here. What's holding and spinning the tap if the nut enters one end and exits the other?

  • @cs233
    @cs233 2 หลายเดือนก่อน +1

    I’m guessing these parts would not meet aircraft standards! 😁
    I wonder how many of them ended up in aircraft parts stocks anyway!

  • @Lex5576
    @Lex5576 2 หลายเดือนก่อน

    I'd like to learn a little bit more about the machinery they used. Very old and primitive compared to the robots making hardware today, but still interesting to see working. I also just wish the people working in these factories had a better life. Lots of dangerous things going on there, but safety isn't a top concern in these Southern Asian countries.

  • @TaintedMojo
    @TaintedMojo 3 หลายเดือนก่อน +10

    No heat treatment? I sure hope these aren’t being used on any load bearing structures

    • @L98fiero
      @L98fiero 2 หลายเดือนก่อน +2

      It might surprise you to know that the vast majority of nuts used in developed countries aren't heat treated either. I had a business next to a company that made millions of bolts, none were heat treated, whether they are heat treated or not depends on the application.

    • @robertteap8052
      @robertteap8052 2 หลายเดือนก่อน

      @@TaintedMojo A standard nut that comes with a bolt with 8.8 stamped on its head is not heat treated... You need to go to a higher grade bolt/ nut before various degrees of heat treatment are used.

  • @TheColleenDabeanShow
    @TheColleenDabeanShow 2 หลายเดือนก่อน +3

    For all those complaining about efficiency - they are getting the job done. If you put a bucket underneath, you need to make sure it isn't too big or it will get too heavy to lift. Letting the pieces fall to the floor is working out just fine for them.

  • @douglasheld
    @douglasheld 2 หลายเดือนก่อน +1

    10:40 I just can't believe this... the guy throwing the lever while his idle left hand remains in the press near the die head.

  • @JR18250
    @JR18250 2 หลายเดือนก่อน +1

    OSHA would have a field day there

  • @jewelhome1
    @jewelhome1 หลายเดือนก่อน

    Hate throw politics in here, but this is part of what Project 2025 is all about. Reduced workplace safety and environmental standards, union busting and child labour. And the billionaires just sitting back raking it in and laughing at you. This could be you, guys.

  • @terrypikaart4394
    @terrypikaart4394 2 หลายเดือนก่อน +1

    Think of all $$$ saved on tooling and material handling, if everything didn't land in the dirt.

  • @ronhat-nx6yq
    @ronhat-nx6yq 2 หลายเดือนก่อน

    Crazy, crazy, crazy!

  • @brijbhushansinghrawat719
    @brijbhushansinghrawat719 2 หลายเดือนก่อน

    अच्छी प्रस्तुति

  • @magnum8264
    @magnum8264 หลายเดือนก่อน

    This is just nuts.....

  • @sarahwinfield3989
    @sarahwinfield3989 2 หลายเดือนก่อน

    If the world stopped buying products from companies with no H & E, safely would soon improve and be safer for the workers.

  • @PayamShirazi
    @PayamShirazi 8 วันที่ผ่านมา

    Just place a bucket under the machine to collect the plugs. 😅😅😂😂

  • @richlevenson6605
    @richlevenson6605 หลายเดือนก่อน

    I'd hate to think these nuts were required on some quality critical application - Gadzooks!

  • @АйратНураев-и8р
    @АйратНураев-и8р 2 หลายเดือนก่อน

    Какой простор для рационализации! Буквально, каждый этап можно изменить для большего удобства и производительности. Взять хотя бы многократное собирание совком изделий. Разве сложно сделать, чтоб из станка они сыпались сразу в контейнер для переноски? Не говоря уже о том, чтобы они сами перемещались на следующий станок по транспортировочной линии. Хотя, возможно, я ошибаюсь, и у них чем больше народу занято - тем лучше.

    • @ВасяВасин-ю7й
      @ВасяВасин-ю7й 2 หลายเดือนก่อน

      По-видимому, там настолько дешёвый труд, что проще поставить ещё одного мужика с совком, чем сделать простейший желоб.

  • @chuckwillingham3103
    @chuckwillingham3103 2 หลายเดือนก่อน

    Thats Nuts !

  • @charles-y2z6c
    @charles-y2z6c 2 หลายเดือนก่อน

    7:21 it's amazing he still has all hind fingers. Next time I tighten down a bolt, I will think of these people with thanks.

  • @perrybrown4985
    @perrybrown4985 2 หลายเดือนก่อน

    Yesterday, these were old sauspans, today they are holding on your truck wheels.

  • @EasyMerchMoney
    @EasyMerchMoney 3 หลายเดือนก่อน +4

    Society develops when people get good nutrition and good food. These people only eat roti and chai. Don't blame them.

    • @L98fiero
      @L98fiero 2 หลายเดือนก่อน +1

      What can one say about a comment like that?

    • @dennisneo1608
      @dennisneo1608 2 หลายเดือนก่อน

      Islam??????

    • @L98fiero
      @L98fiero 2 หลายเดือนก่อน

      @@dennisneo1608 No, racism, hubris and arrogance!

    • @zen4men
      @zen4men 2 หลายเดือนก่อน

      3 brain cells helps!

  • @richo1177
    @richo1177 2 หลายเดือนก่อน

    @7:50 we found the only smart guy who put a container under his work pieces

  • @jamesocker5235
    @jamesocker5235 2 หลายเดือนก่อน

    How sketchy bolts are made😊

  • @_CryptoNoob_
    @_CryptoNoob_ หลายเดือนก่อน

    That's nuts....

  • @epicureansights
    @epicureansights 3 หลายเดือนก่อน +2

    Amazing work 👏 👏

    • @dappy848
      @dappy848 3 หลายเดือนก่อน +1

      are you taking the piss

  • @888jackflash
    @888jackflash 2 หลายเดือนก่อน

    Wow. I was in modern ball-bearing manufacturing for Ford.. full ISO Quality certifications, etc., the huge lack of any "controls" on these processes is mind-blowing. HOW ABOUT A BOX UNDER THE OUT-FLOW

  • @АлександрНиколаевичБорисен-л7й
    @АлександрНиколаевичБорисен-л7й 3 หลายเดือนก่อน +7

    Пашут как рабы на галерах, работая в скотских условиях и за гроши😢

    • @zen4men
      @zen4men 2 หลายเดือนก่อน +1

      Probably safer than a Russian soldier in Ukraine!

    • @Titus9508
      @Titus9508 หลายเดือนก่อน

      And would be a good wage in many countries that make products for 'developed nations'.

    • @noneofyerbeeswax8194
      @noneofyerbeeswax8194 หลายเดือนก่อน

      Рабский труд - двигатель прогресса!

  • @lisiatepalu7737
    @lisiatepalu7737 หลายเดือนก่อน

    Might enjoyed it

  • @Ocean_breezes
    @Ocean_breezes 28 วันที่ผ่านมา

    Now when I go into a Home Depot, I see the hardware aisle in a completely different perspective. That box of 1/4 nuts may have been handled by 50 guys in sandals and robes before they were even boxed

  • @Ocean_breezes
    @Ocean_breezes 28 วันที่ผ่านมา

    I didn't think we had video cameras in 1850.

  • @everioke
    @everioke 2 หลายเดือนก่อน

    Remember this when you order stuff from Temu.

  • @andrewhammond1949
    @andrewhammond1949 2 หลายเดือนก่อน

    And people say that the English didn’t improve the lot of the brown man! Imagine what it would be without colonialism! ( I’m a descendant of convicts in Australia, and very thankful)

  • @glynluff2595
    @glynluff2595 หลายเดือนก่อน

    Is this why foreign engines fall apart?

  • @bobdean5728
    @bobdean5728 2 หลายเดือนก่อน

    Steel capped safety sandals 😉

  • @jaystengel7511
    @jaystengel7511 2 หลายเดือนก่อน

    Ooo that guy got sandals, he must be a supervisor…

  • @PavelZajec
    @PavelZajec หลายเดือนก่อน

    Nice nutz!

  • @MatthewWright-y9t
    @MatthewWright-y9t 2 หลายเดือนก่อน

    Seeing such youngsters is what gets me. Ya the drop it on the ground over and over to pick it up just doesn’t make sense either

  • @ms.annthrope415
    @ms.annthrope415 2 หลายเดือนก่อน +3

    12:15. Quality control engineer there. I wouldn't use that stuff on my lawn mower.

    • @L98fiero
      @L98fiero 2 หลายเดือนก่อน +1

      I agree with your name. These people are making product with what is available to them and to the limitations imposed by that, if it does the job, who are you to judge, quality control engineer or not.

    • @ccahill2322
      @ccahill2322 2 หลายเดือนก่อน

      @ms.annthrope, They only do these videos to amuse all the "American" genius here...after all what else would they have to laugh at?

    • @DennisBocock
      @DennisBocock หลายเดือนก่อน

      And your mower is junk in 5 years

  • @DennisBocock
    @DennisBocock หลายเดือนก่อน

    I'll bet a lot of those old machines were powerd by steam over head shaft and pulley systems

  • @brucebaum1458
    @brucebaum1458 2 หลายเดือนก่อน

    Wonder if that’s the QC guy at end of vid checking every nut to make sure it spins on the bolt.

  • @dennisneo1608
    @dennisneo1608 2 หลายเดือนก่อน +1

    At least they still manufacture in Pakistan. Here in Australia we manufacture NOTHING!

  • @Kotikjeff
    @Kotikjeff 2 หลายเดือนก่อน +2

    Didn’t quite see the tap removal.

    • @scottnunya1
      @scottnunya1 2 หลายเดือนก่อน +1

      I was wondering how that part worked too

  • @restaurantattheendofthegalaxy
    @restaurantattheendofthegalaxy 2 หลายเดือนก่อน +2

    Its amazing to me that their processes involve unsafe practices, ancient machinery being run by 12 year olds with no safety guards, poor lighting, no eye protection, substandard materials that are regularly thrown in the dirt, men dipping their hands in pools of acid to fish things out...all for some non-uniform nuts that are made of mild steel that are only good for holding a wheelbarrow together. We were making better hardware in the USA over 100 years ago, probably with these very machines.