I think that Oil Quick, or Coupfix, Likufix etc. gives you a big boost in productivity, not only that you are quicker in changing attachments, some attachments only make sense with such a coupler, if you have to remove 4 hoses to unlock a concrete crusher, and add two others to attach a magnet, just to collect a few rebar pieces that could puncture a tyre or hurt someone, it would not happen. You have much less repairs, because the hoses are nice and tidy, and not dangeling arround. And you are not forced to use your attachments for tasks they are not built for. Before Oilquick, often we used the hydraulic hammer to sweep up debries, or the selector grab, to push down brick work etc. And eveverything is more flexible, if a free truck is arround it can be loaded any time, without loosing time removing some attachments.
Das sind, Geräte. Genau das richtige, für so Baustellen. Zum abbrechen und Rückbau von Gebäuden. Mich interessiert alles was mit Baumaschinen was zu tun hat. Interessiert mich schon, als ich noch klein war.
Noch einer der vom Baggervirus im Kleinkindalter infiziert wurde. 👋 Meine Mutter sagte mir, dass mein erstes Wort "Bagger" war und etwa Mama oder Papa. 😆
Hi, in my poor country, for the same work, here, maximum we work with a 22 ton excavator , same attachments , naturally more little. But , in Germany , the fuel is free of charge ? Do you need a 60 ton excavator, in demolition boom version, for similar work. For demolition no so hard concrete, you don't need so big machine The only machine here , that i like, is the Atlas Krupp hammer, image HB 7000 , for the machine carrier . All excavators brands, work well in so light job. Bye
Think fuel in Germany has one of the most highest prices in Europe. Time is money. The shopping center has to be demolished in a few weeks only. So they put up to 13 excavators on that site to get it down quickly.
kann den gebrauchen, zwei schaufeln und zack ist der pool ausgehoben. okay, noch zwei drei bäume damit samt wurzel ausbaggern und der garten ist fertig
Totally wrong angle for his hammer! The chisel of the hammer must "look" at the mashine with an angle about 45 degrees. Also he start from the "End" of the hammering surface. It supposed to finish his work on the corner!!!! We start from the point or line closer to machine and go step by step away from the machine. Corners is the last thing we hammering or digging, for many reasons. Of course there are some difficult circumstances as exceptions, but as I saw in video, he is totally free and work in totally flat and clean area.
You gotta love those Oil-Quick couplers are sure nice. It is nice to not have to get out of the machine to swap hydraulic hoses on attachments.
Quick couplers are, but not ones that also connect the hydraulic lines automatically for Breakers, grapples, shears, concrete cutters etc.
You found those quick couplers from different manufactorers on many excavators in Germany. It's common.
I think that Oil Quick, or Coupfix, Likufix etc. gives you a big boost in productivity, not only that you are quicker in changing attachments, some attachments only make sense with such a coupler, if you have to remove 4 hoses to unlock a concrete crusher, and add two others to attach a magnet, just to collect a few rebar pieces that could puncture a tyre or hurt someone, it would not happen. You have much less repairs, because the hoses are nice and tidy, and not dangeling arround. And you are not forced to use your attachments for tasks they are not built for. Before Oilquick, often we used the hydraulic hammer to sweep up debries, or the selector grab, to push down brick work etc. And eveverything is more flexible, if a free truck is arround it can be loaded any time, without loosing time removing some attachments.
Das sind, Geräte.
Genau das richtige, für so Baustellen.
Zum abbrechen und Rückbau von Gebäuden.
Mich interessiert alles was mit Baumaschinen was zu tun hat.
Interessiert mich schon, als ich noch klein war.
Noch einer der vom Baggervirus im Kleinkindalter infiziert wurde. 👋 Meine Mutter sagte mir, dass mein erstes Wort "Bagger" war und etwa Mama oder Papa. 😆
Hat der HD-Ketten aufgespannt?
Weil die standardmäßigen Ketten beim 960Dem. doch eigentlich schmaler sind
Boah, ist mir damals gar nicht aufgefallen.
very nice video of a very nice machine thank you
Merci bien!
Ist Fischer jetzt auf einem Liebherr-Trip?
Scheint so... bessere-preise.de
😂😂😂😂😂 der ist gut
Sehr schön Benjamin !
Vielen lieben Dank Marco!
Liebherr! my favourite. There is a man standing nearby who could pick up pieces of polythene
Yes, those hand grab men are very important to select the material by law.
Hi, in my poor country, for the same work, here, maximum we work with a 22 ton excavator , same attachments , naturally more little.
But , in Germany , the fuel is free of charge ?
Do you need a 60 ton excavator, in demolition boom version, for similar work.
For demolition no so hard concrete, you don't need so big machine
The only machine here , that i like, is the Atlas Krupp hammer, image HB 7000 , for the machine carrier .
All excavators brands, work well in so light job.
Bye
Think fuel in Germany has one of the most highest prices in Europe. Time is money. The shopping center has to be demolished in a few weeks only. So they put up to 13 excavators on that site to get it down quickly.
How is the cost of Diesel fuel/liter in Germany and how you cost your clients per hour or per 8 hours(day time) for this 960?
Wau ein Kraftprotz. Liebherr was sonst. Schönes video
Ja, geile Maschine! ;-)
kann den gebrauchen, zwei schaufeln und zack ist der pool ausgehoben. okay, noch zwei drei bäume damit samt wurzel ausbaggern und der garten ist fertig
😂😂
Good one, Ben.
Thx Alan!
Erste Sahne! Bitte mehr davon :)
Danke! ;-) Eins kommt noch mit der Drohne von der Karre.
Wenn der Arbeiter neben dem Löffel steht sieht man wie groß der ist da passt was rein Gruß Frank
Guten Wochenstart!
👏👏👏 Benjamin 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Meeeeeeeeeeeeeeeercy!!!!!
Beast💪💪💪💪👍👍👍👍😀
YEAH!
..die Greifergröße ist aber eher was für nen 946, am 60er doch etwas schmächtig. .
Der Löffel ist zum reißen von harten Böden / Beton gedacht.
Benjamin Beytekin er spricht aber vom greifer😉
👍
:-)
Totally wrong angle for his hammer! The chisel of the hammer must "look" at the mashine with an angle about 45 degrees. Also he start from the "End" of the hammering surface. It supposed to finish his work on the corner!!!! We start from the point or line closer to machine and go step by step away from the machine. Corners is the last thing we hammering or digging, for many reasons. Of course there are some difficult circumstances as exceptions, but as I saw in video, he is totally free and work in totally flat and clean area.