How To Use Airpod Pro Refillable & Reusable Airbrush Cartridge | TEMPTU

Airpod Pro is a reusable and refillable airbrush cartridge designed for use with TEMPTU airbrush makeup, skincare, root touch-up and tanner.
-Reusable and disposable
-Mix and customize colors in the open-chamber
-Spray clean after every use, lasts up to 120 uses
-Compatible with all TEMPTU airbrush formulas, TEMPTU Air and TEMPTU One airbrush devices
Prepping your Airpod Pro
Remove the tamper seal and cap. If it is the first time you are using this Airpod Pro, prime it by putting 1-2 drops of S/B Airbrush Cleaner over the inner well and pulling gently on the clear loop once. Line up the Airpod Pro with the TEMPTU One or TEMPTU Air and slide it into place until it clicks. Power on and spray cleaner through.
Attaching your Airpod Pro
Press down on the round release button on the side of the device and slide the Airpod Pro, window side up, into the device until it clicks into place.
Detaching your Airpod Pro
Press down on the round release button on the side of the device and pull downward on the Airpod Pro to remove it from the device. Be sure to close the black plug on the Airpod Pro when not in use.
Using your Airpod Pro:
STEP 1: Insert 7-10 drops of makeup into the inner well of the Airpod Pro, needle should be fully covered.
STEP 2: Blend with the TEMPTU Cleaning & Mixing Brush if mixing colors (sold separately).
STEP 3: Snap clear cap onto well for spill-free application.
Mastering a Flawless Finish:
Hold the device about four fingers from the face. Always moving in small, circular motions for a seamless, even finish.
Use a light touch with the SoftTouch Control when applying makeup to the face. TEMPTU makeup is weightless and buildable- a little goes a long way.
Stop and look between passes until reaching the desired level of coverage.
1-2 passes for sheer coverage
2-3 passes for medium coverage
3-4 passes for full coverage
Tips to avoid a wet, heavy or uneven finish:
-Do not hold One too close to skin
-Do not move in a back-and-forth motion
-Do not press too hard on the SoftTouch Control
Cleaning your Airpod Pro:
STEP 1: Drop S/B Airbrush Cleaner into the inner well of the Airpod Pro after using TEMPTU makeup or between colors.
STEP 2: Use TEMPTU Cleaning & Mixing Brush to clean around and under the needle.
STEP 3: Spray completely through.
STEP 4: Repeat as needed until spray is clear.
STEP 5: When finished, regardless of formula used, always clean the Airpod Pro thoroughly with Alcohol 99% so it is ready to use for the next application.
STEP 6: Never leave makeup sit in the Airpod Pro to dry or harden.
Tip: For no-mess cleaning, spray into Pro Airbrush Cleaning Pot (sold separately).
Airpod Pro Care & Maintenance:
Never soak or submerge the Airpod Pro in alcohol.
Never store makeup or other products inside the Airpod Pro.
Each Airpod Pro is designed to last up to 120 uses with proper care and depending on frequency of use.
To care for the TEMPTU Cleaning & Mixing Brush, it is best to clean the brush after and smooth the bristles down to help dry back to shape.