Well.. I fixed my ex70. It took 4 hours of figuring it out. These videos are good at showing you how to take the cover off, then i was lost. If this post gets a few comments asking how to do it in English. I will take my projector off the ceiling and do it again. God knows i have already had it completely disassembled enough times. Cheers. (Its easier then you think)
I had exactly the same problem with my EB X62 , your video helped me a lot . i ve bought my epson for 20€ only with this failure now it works perfectly well. thank you very much !!!
muchas gracias me sacaste una duda que tenía porque a mi proyector le sucede lo mismo que a tu video y no sabía porque. muchas gracias y Saludos desde Argentina
excelente vídeo amigo, eres uno de los pocos que dan soluciones reales, unas pregunta?, Tengo un proyector epson ex3240 el cual al prenderlo da vídeo unos segundo y se apaga, tuve la oportunidad de probar con otro que esta en buen estado y detecte que la falla esta en la tarjeta lógica, seria posible dar solución a esta falla. gracias.
Thanks very much for this video. Helped me to fix mine. For those whose aren't turning on after reassembly, try re-seating each of the PCBs (printed circuit boards) for the RGB (Red, Green & Blue) and for the connection to the panel. It's written on the motherboard. You may need to push it in a little harder to ensure a secure connection. If that doesn't work, check to ensure that you have contact with the fail safe that's located right by the bulb (See 15:40)
Hello Muhammad, thank you for the video! Quick question: What size is the long screwdriver that you used to disassembly or open the projector? The yellow one that is on your left?
Great video, you can tell me what is the value provided by the NICHICON T2AL / 250VAC K-G00-623-A12-R power supply to power the PKP-K230N ballast, red, black and white wire if you have diagram would help me a lot, thank you
okay its just that i just bought a new lamp and i dont want to end up buying another one lol but il do it tomorrow il give you the dets tomorrow thanks
On similar Epson projector models with basically the same iris mechanism, I have had two with main board failures, and one with broken glass in the gears caused by a broken lamp. All the rest I have worked on have been bad motors. Be extremely careful of the aluminum louvres. They are not attached very well and could be pulled off pretty easily.
@@tiffinyhowell4932 it worked for a while before shutting down again, so I bought a small motor that opens and closes the lens to replace the old one... when I put it together however, it just refused to light up, so I don't know where I messed up, hopefully you have more skillful hands than me :D wish you luck!
+Muhammad Agus Ismail i reassambled, and it turned on but then it turned off again, 3 flashing lights again. its a new light bulb, i cleaned the parts just like this video... any other tips? maybe the temperature gauge is off? :(
+Muhammad Agus Ismail yes I believe so, I lined up the A line arrow with the B and can move both with the gears back and forth. When i placed it inside, it could still move freely with the gear rotation. I think I've had this unit 5+ years. maybe it's time to replace it? I cleaned out dust, and it does turn on now but soon the screen goes black and shuts down with the three red lights flashing on top, then it sounds like the fan is going in overdrive. It got very hot very quickly.
![Error Auto Iris Epson Projector [] مشاهدة ممتعة](http://i.ytimg.com/vi/vC3EoLXx-iU/mqdefault.jpg)
Well.. I fixed my ex70. It took 4 hours of figuring it out. These videos are good at showing you how to take the cover off, then i was lost. If this post gets a few comments asking how to do it in English. I will take my projector off the ceiling and do it again. God knows i have already had it completely disassembled enough times. Cheers. (Its easier then you think)
I had exactly the same problem with my EB X62 , your video helped me a lot . i ve bought my epson for 20€ only with this failure now it works perfectly well.
thank you very much !!!
Thank you so much. I fixed my projector watching your video. Thank you
video yang bagus. Saya rasa itu efektif. Salam dari Argentina.
Excellent video! Just helped me fix our Epson EX7210. Seems to be the almost EXACT same projector.
muchas gracias me sacaste una duda que tenía porque a mi proyector le sucede lo mismo que a tu video y no sabía porque. muchas gracias y Saludos desde Argentina
Great ! Just what Iwas looking for. I had the same problem with an EB X6 a now it's gone.
Thank You
terima kasih tutorialny mas bro.. berguna banget,, alhamdulillah bisa ok lagi projektor .. ilmunya berkah
Buenísimo.. gracias por compartir esta información.. saludos desde Argentina misiones...
Gracias por tu valiosa información, desde la Ciudad de México
Thanks very much for this, showed me where the problem was and how to fix it. Best wishers to you. Excellent video!
Very useful video. Thanks for the help. Greetings from Colombia.
thank you very much. thanks to your clip i was able to fix it myself
Bien ahi .. Gracias amigo .. me salvaste de un problema
MUCHAS GRACIAS me servio, era ese mismo problema.
gracias amigo por el video saludos desde mexico
Thank you, man. I will try this today and let you know how it goes
i broke one of the ribbons. I'm gonna trash my projector. :(
Thank you...worked perfectly
excelente vídeo amigo, eres uno de los pocos que dan soluciones reales,
unas pregunta?, Tengo un proyector epson ex3240 el cual al prenderlo da vídeo unos segundo y se apaga, tuve la oportunidad de probar con otro que esta en buen estado y detecte que la falla esta en la tarjeta lógica, seria posible dar solución a esta falla.
gracias.
The only thing I have to say is Thank you very much! you saved my life and you helped me to save a lot of money. Thanx! God bless you.
Thanks very much for this video.
Helped me to fix mine.
For those whose aren't turning on after reassembly, try re-seating each of the PCBs (printed circuit boards) for the RGB (Red, Green & Blue) and for the connection to the panel.
It's written on the motherboard.
You may need to push it in a little harder to ensure a secure connection.
If that doesn't work, check to ensure that you have contact with the fail safe that's located right by the bulb (See 15:40)
how does the fail safe work and how do i contact it? my epson hc8100 has no power after i cleaned the cinema filter in it. please help
Muchas gracias desde Colombia Graciassssssssssssssssss
Great. Bro. Very usefull . Thank you.
Hello Muhammad, thank you for the video! Quick question: What size is the long screwdriver that you used to disassembly or open the projector? The yellow one that is on your left?
Thanks! I need someone to buy one of these for me, so I need to give tham the exact description. What diameter is it?
Hola buenos días, quisiera saber que es lo que le aplícaste en el minuto 7:13 tipo spray. Gracias
Oh , thanks dear , I can solve my problem
Спасибо огромное за ваше видео. Решён вопрос ошибки :
ошибка автонастройки диафрагмы
tnx...
Excellent
tanya mas kalau pada projector panasonic pt lb280 yg bagus yg mutarmya ringan atau agak berat mas logam itunya
Merci Merci
Great video, you can tell me what is the value provided by the NICHICON T2AL / 250VAC K-G00-623-A12-R power supply to power the PKP-K230N ballast, red, black and white wire if you have diagram would help me a lot, thank you
@@Muhammadagusismail Thank you so much. If you can, I'll be very happy.
Tnx..
tank you
It's a real BUG. hhhhhhhhhhhhh. So thank's my friend.
okay its just that i just bought a new lamp and i dont want to end up buying another one lol but il do it tomorrow il give you the dets tomorrow thanks
+Muhammad Agus Ismail what was that paste and spray u used?
+Muhammad Agus Ismail what was that paste and spray u used?
Great
merci merci bq
hi my epson messed up it gives me the iris error message would does this fix my projector 100 percent? or would there be a chance it wont work?
good
cool
thanks , i repaired a proyector epson with the same problem, had insects inside..
very useful video. Friend. Thank you.
But can this error be the reason of any other problem? or is this only for that particular part?
Thanks
On similar Epson projector models with basically the same iris mechanism, I have had two with main board failures, and one with broken glass in the gears caused by a broken lamp. All the rest I have worked on have been bad motors.
Be extremely careful of the aluminum louvres. They are not attached very well and could be pulled off pretty easily.
Thank you friends, very useful.
i love you boss
Hi I followed your instructions but now the projector won't turn on. What should I check? Thank you,
danko
My problem Hitachi XGA CP-X327 when i on power suiz after sec lcd screen on, then fius burning...fius 5a 250v...i don't know why...any one do know it?
my projector ab925 apson 3led blinking problem pleese solv
sir pleese.2 yoor contict no
I'll leave this to the professionals. lol.
my epson projector EB-x9 one hour runnig after temp error how this problem salov
The first time i found what i want
sdh saya bersihkan , tp masih kayak gtu mas. mohon pencerajan nya mas
Sudah pas om
hey my projector is now pink and my buttons don't work can you help me ?
Epson 6p
+Muhammad Agus Ismail now it's blue and everything is doubled
+Muhammad Agus Ismail and yes
Wish me luck as I'm going to attempt to fix the projector I just found in the park (I'm not kidding)
LoL....same with me. did it work for u after?? I'm trying to fix the one I found at a park as well ..LoL. hopefully it works. lol
@@tiffinyhowell4932 it worked for a while before shutting down again, so I bought a small motor that opens and closes the lens to replace the old one... when I put it together however, it just refused to light up, so I don't know where I messed up, hopefully you have more skillful hands than me :D wish you luck!
i did this and now my projector wont turn on at all :( please help
+Muhammad Agus Ismail i reassambled, and it turned on but then it turned off again, 3 flashing lights again. its a new light bulb, i cleaned the parts just like this video... any other tips? maybe the temperature gauge is off? :(
+Muhammad Agus Ismail yes I believe so, I lined up the A line arrow with the B and can move both with the gears back and forth. When i placed it inside, it could still move freely with the gear rotation. I think I've had this unit 5+ years. maybe it's time to replace it? I cleaned out dust, and it does turn on now but soon the screen goes black and shuts down with the three red lights flashing on top, then it sounds like the fan is going in overdrive. It got very hot very quickly.
tnx...