The Focus 14 Blue Refreshable Braille Display Controls & Layout

A refreshable braille display creates braille by electronically raising and lowering different combinations of pins in each braille cell. The Focus 14 Blue braille display connects wirelessly to your devices using Bluetooth® or via USB cable. Learn about the Focus Blue controls such as panning buttons, cursor router buttons, nav rockers, Perkins-style braille input keys, etc. in this instructional demonstration.

[@mohammadsamiibrahim5463]

How to buy it

[@emilysanchez4906]

Does anyone know how to set the time on it? It's driving me crazy trying to figure it out.

[@FreedomScientificTraining]

Hi Emily,
To set the time:
1. Press the Menu button (located between dots one and four above the cursor routers) to access the display configuration menu. You will know the menu is open when the Focus Bluetooth ID is displayed.
2. Use the Rocker bars on the front of the display to navigate to Clock and press the Right Shift button to open it.
3. The hours value will be selected, which is indicated by dots seven and eight below the number. Use the Rocker bars to set the hour.
4. Press the Right Panning button to select the minutes value and use the Rocker bars to set the minute.
5. Press the Right Panning button to select the seconds on/off value and use the Rocker bars to toggle the seconds display on or off. When enabled, seconds are shown as part of the time on the status message.
6. Press the Right Panning button to select the AM/PM/24-hour value and use the Rocker bars to choose AM, PM, or 24-hour time.
7. Press the Right Selector button to save your changes and close the Clock.
8. Press the Right Selector button again to exit the configuration menu.
If you have any additional questions, please don't hesitate to email us at [e-mail].

[@emilysanchez4906]

Freedom Scientific Training What about setting the date? Would you just do the same things as you would to set the time?