Custom Painted Tank Using Aerosol's
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2024
- On this video we use our DNA Custom Paints Aerosol colours to paint this fuel tank from start to finish. The best part about these cans are even the home DIY person can use them and get great results.
All the products used in this video can be seen via the links below
Pure Black Basecoat
www.dna-paints...
Silver Metal Flake
www.dna-paints...
Cola Brown Candy & Sahara Yellow Candy
www.dna-paints...
Wax and Grease Remover
www.dna-paints...
Normfest primer
www.dna-paints...
Normfest Clearcoat
www.dna-paints...
Follow us on Social Media
Facebook: / dnapaints
Instagram: / dnapaints
Wow! I never would have guessed that you started with a black base! Great job!
Absolutely beautiful! Do you wet sand between silver flake base and candy? thank you
Hi Brian you can achieve this 2 ways ,
1, Flake then clear coat , then wet sand then candy and clear
2, Flake then candy then clear without wet sanding .
in the video i done everything the same day within a 4 hour window. with no wet sanding
The times you would wet sand the clear is if you have used a flake bigger than 100 micron "not available in aerosol" . or if the masking designs/colors are very intricate and require multiple days to finish.
Cheers Mark
That’s not painting with cans. That’s making art
Superb job young man. A master at work.😊
thankyou!
Nice! How many cans of each (base, flake, candy and clear) did it take to do the tank?
Hi Haydn, one of each was used on this tank
Beats cleaning the gun between coats .
Hi Mark great job , I have a 76 GL1000 they have a false tank that's in three pieces , two side covers and two radiator sheilds , I have decided to pant it in , smashed metal metallic, with apple red candy , and clears of course , I would like to do inside and out as the the tank shelters fold down etc , my question to you is how many rattle cans of paint will I need ? Or would this be un economical and be cheaper to do with real spray gun .
not at all , the Aerosols are designed to be used on smaller items like motor bikes etc. if its just the tank your painting , 2 cans of smashed metal, 2 clear, 3 candy. this will be a little more than youll use but defiantly worth having extra when painting candy just in case
Friggin awesome mate! Well done and thanks for sharing!
Glad you enjoyed it
Thank You ...
Thats talent
thanks! its a real basic design but shows the aerosols really well
so hip and fly
All your work looks absolutely amazing I was wondering how many square feet one can of your candy aerosol paint will do. And the flake as well if you don't mind any help is appreciated thank you very much
This takes days to do not a day job it’s days
Three hours. Read the comments.
Another great video cheers bro i use a lot of dna aerosol cans for small jobs i may have to dip
I'll have to come to oz and you can train me up..
How long do you have taping between coats before its necessary to scuff with sand paper or scothbrite. Most paint requires 7min-15 min in between coats, i dont think i could tape off in that amount of time plus it would be wet.
Most paints including ours have a maximum of 3 hours from your last coat till you need to clear coat the base . Outside of that and you risk delamination of the clear . You can scuff the base over 3 hours later and reapply more base then clear .
Great skills especially from rattle cans ..really pops
So you let it dry, clear coat it and then pin strip it? I'm doing a spider web in mine 2 different colors.
no , everything was painted the same day within 3 hours all with aerosol cans . there is no fancy edit work in any of the videos on the channel . everything is painted the same day and nothing is ever buffed or polished . everything is either off the gun or from a aerosol can
How long did you leave between the black base and the flake, and the flake and the clearcoat? about 15 minutes?
Hi Shaun, would have been roughly 10 mins between each stage . this was painted in a heated booth @ 25 degrees . if your painting in colder conditions then longer flash times are required .
@@DNAPaints great, thanks for the reply
A genuine work of art
and all done with aerosols
@@DNAPaints, yes sir. Just shows its not always the material or equipment, you are very very skilled
What type of green tape is he using to make lines???
just 3M fine line tape mate
Sorry to be a pain in the A... , so when adding vinyl decals , how long before vinyl decals can be added to candy with water and a few drops of dish wash liquid . Cheers .
sorry mate not sure what your trying to do here. if your wanting to add Vinyl decals to a painted surface . paint your parts and clear it . sand it down then apply decals then clear parts again . keep it simple
@@DNAPaints thank you , didn't know that , I'll get there , DIYer , some things are never written down , and full time painters just do it because they were probably shown when doing an apprenticeship. Thank you .
@@Cobra427Veight its no problem mate
Beautiful
Amazing
Wicked
Siiick
That came out incredible!
was actually my first time using our aerosols on an actual tank . came out pretty good 🤞
Fucking awesome 👍
thankyou!
Is that paint available in the usa?
not at this stage
😮
Do you have candy teal in aerosol can
yes we do , head to dna-paints.com to see the full range
@DNA Custom Paints I did but I don't see teal anywhere. What other name would it be under
@@Genesis-ef1jt Teal will not be a product name . you will need to search in each of the paint series we make , ie, profile basecoat , candy basecoat , helix basecoat , metallic basecoat , candy colorz to find the "teal" your wanting
Wow! That looks awesome! If only I had my own spray booth, I’d go crazy with this stuff
That music is so retro '80s Hollywood, I almost expected Jean Claude Van Damme to appear and kick the tank over. Amazing work as always.
that would have been a experience