Hello thank you for ur video. But I have a problem my labels are coming small I tried everything and also when to ebay and I edit the settings part by 4x6 and still.coming small whar om doing wrong thank you
Thank you for this. My rollo was printing too light (I got a lecture by the post office worker for it not too long ago). I really appreciate you sharing the info. Really easy to follow tutorial!! Thanks again! - Val
I don’t have a Rollo printer but I want to tell you that you’re always so thorough in what a great way to share information that you know others would benefit from. Right now I just still use my normal ink jet printer because I print from my phone wireless I don’t make enough sales to deem the bulk fast printer yet maybe one day I will thanks so much Steve always watch your videos and always looking for that tumi bag!!
Glad it helped! They are great printers, after first few should be fine, clean the heat bar once in a while w/ alcohol wipe- I think its explained in instruction book
Thanks for sharing this Steve, I have found the settings that it comes with work just fine but this is great info. The Rollo was the best purchase I have made for my business.
Great Video, My Posh Labels always print lighter than my Ebay labels with my Rollo for some reason hopefully this will help. Thanks Steve Your the Man.
Thanks Andy. Yes same here, even on density 8, they still are not as dark as ebay, but better than default of 6. Not sure why that is. No, your the man!
So though it helped the density on label it still did not scan at the post office and I’m at the highest density. Is there anything else I can do? Thank you much
No complaints with Rollo. I researched before and it seems to be better than dymo. I never had dymo so cant say much, but I do read/hear about issues with dymos but none with rollo. Plus dymo uses specific labels, Rollo you can buy any or get free from ups
Thank you so much for this tutorial. I had no idea you could change those settings. Can you please recommend how to adjust the rollo paper to make labels and invoices print in the middle. They either print too small or too big and cut off bar codes. I have tried to figure it out but no success. Thanks in advance.
I have the Rollo printer and use the "Rolo Virtual Hi-Res Printer" driver to print 1,000+ labels per month. The print quality is very good and no special adjustments were needed. Have you compared the two Rollo Drivers to see which gives the best print results? Just curious! Thanks :)
I only see 1 driver on rollo site. I ggogled what you said and don't see anything except the 1 driver from rollo. Where did you download it from? thanks
Mine is making a bunch if cracking and snapping sounds when printing, suddenly. If I print a test page from windows, no problem. If I print from an app.... loud cracking. Google search says to adjust the speed/density settings but I hadn't ever changed these and still loud after changing them
I got my brand new rollo and some of the words is hard to read when it prints. Looks faded. So I tried your way, and it still doesn’t work. Did I do something wrong or do I need to try a different way
for me the first few labels were light but then it got better. not sure. even though its new can try cleaning heat/printing bar(silver bars inside) w the alcohol wipes.
I finally got my Rollo thermal printer, and my density is still coming out light even at 10. I don't know what to do, I don't if printing from different places is making a difference (such as a browser vs photo viewer), any ideas? I am trying to print a Mercari label, after rotating it. Any advice would be helpful, Thank you.
weird, depends what your considering light. it doesnt have to be dark black, but it should darken with settings. Mine was light at first but got better after a few printings.
Why is it forced to be on 100*210? If I make a custom 100*150 I have no way to change it to it.When I click print the only custom that shows up is 100*210.I cant delete 100*210 either. My other problem is it is not printing the box line next to priority on the left.I want it to print the whole label like your are I guess I will try the 100*210 setting.
@@PickRoll The default 100mm x150mm doesnt print right for me so I either have to do the custom one which cant be anything but 100*210 or use 105*145. It is stupid to have a custom setting that cant be deleted.Plus if I make a new one I cant switch to it. You clearly are just a lucky one where the default just worked right off.
@@DanRaidersWarriorsSharksGiants Dongt know, I do change it for printing the bulk scan sheet, but change back to 100 150. You also need to set it to 4x6 on certain sites(ebay, poshmark...)
Hello, I have some 4x2 labels that I want to print. Is there a way to set up the printer to print that size? I'm not seeing it. Its printing across 2 labels. It's not for amazon it's my own personal labels I'm trying to print out. Thanks
This is about print density/darkness and print speed. it ajusts the printer so will be for any label. If you asking how to change for a different size I don't know, I only use 4x6
Do you know how I can stop my rollo printer from printing out the same label over and over...i print my labels one by one..i feed in one label at a time..it prints the label I need..if I feed in another label..it reprints it automatically...l i literally have to click it off then back on to...to reset it..is there a setting I can turn on or off for this issue?
Why feed 1 by 1? do you have a roll or folded stack? if so put in label and leave attached to stack and see if it keeps going. could be a thing where printer thinks it ran out and didnt complete print- just thought, oherwise I dont know.
Hello! For some reason my rollo printer is only printing 1 page out of the rest, the rest will just come out blank. Why is this happening? I'm using a MacBook Air.
I’m trying to ship an actual customer label but my rollo keeps printing the John Doe label instead of the current label I selected. Any idea of fixing this
Pick & Roll the former. I’ve printed the sample label several times (mostly on accident lol). I’d place my label at the back of the printer and even when I don’t click print it’ll print the John Doe out of nowhere
@@billbandoh5818 hmm, when you put 1s label of roll/stack in and close the top down, it should feed thru 1 label(blank) then be set. My question was have you printed other labels for items correctly with no issue?
Pick & Roll yes recently I have for my 1st order (happy about that). I’ve noticed that there are many failed prints in the queue and I believe anytime I turn on the printer it prints the old backed up files. If that makes any sense
@@fobguy714 I dont priny from ups so dont know. For paypal, click the Gear Icon in the far top right corner--On the left-hand side, please choose Shipping--Under Shipping Preferences, click Update--Pick Label Printer and one of the 4 x 6 printers--if you have a rollo just choose one of the Zebra 4x6 -- - Choose Account Settings
ALSO, did it start right after you changed/loaded new labels in? if they are upside down it wont print because the bottom material is non printable material.
@@PickRoll ,I conected the printer Rollo to hp pavilon laptop,,I downloaded the drivers too,then I print test, and the print print label and small size label,I tried diferente ways and I cant doin,I want set up label 4×6
Having so many issues with this fricken thing. Can't make fedex or ups lables on ebay cause I have a MacBook and all the apps are paid if you want to crop and adjust a pdf. Hence why these thermal printers are trash.
Pick & Roll I will try that. I just print them on my regular printer and use tape for now . I have too many orders to wait on that printer lol. Thanks !
Hello...good info. I am trying to create stickers. The first one is perfect but when it prints the second one its off center. I am using 2.25"x1.25" sticker labels. I have not changed any setting, would you know why the 2nd label would go off center?
If you enjoyed this video and it helped you, please Subscribe and watch my other videos. Here's another.... th-cam.com/video/iC3aI-lzMTI/w-d-xo.html
Hello thank you for ur video. But I have a problem my labels are coming small I tried everything and also when to ebay and I edit the settings part by 4x6 and still.coming small whar om doing wrong thank you
@@DMOREL11101 Dont know, hard to say without actually seeing settings/being there.. call rollo, they are helpful
I just got my Rollo and was looking at setup videos and came across yours. Thank you for the legwork and comparison!
Glad it was helpful!
Thank you for this. My rollo was printing too light (I got a lecture by the post office worker for it not too long ago). I really appreciate you sharing the info. Really easy to follow tutorial!! Thanks again! - Val
Your welcome. Yea default is a little too light. Appreciate you watching Thanks Val.
Thank you! I've been trying to get my labels to print darker and finally found this video...it solved my problem!
Glad I could help!
Thank you. I used mine today for the first time and was trying to figure out how to darken. Appreciate you for the lesson
Good luck, and enjoy saving money on ink lol
Thank you! This was so helpful, I’m so glad I went with Rollo and this made a nice subtle difference in the printing.
Glad it was helpful! Yes rollo is very good
After watching this, I'm definitely cutting a slit in my table like you have. Very innovative!
Cool. Saves alot of room with the stack below, thanks
@@PickRoll I use rolls currently, but it'll be easy enough to mount a spool (maybe I'll use a toilet paper mount) to the underside of my table.
@@jonathaneder6835 Yes TP holder sounds good.
Love how you broke down each setting great video!
Thanks Chris
Thank you for this!! I've recently had several packages not scanned or lost by usps and I figured out it was because my labels were really faded.
Glad it helped
Thanks for the info on the settings. Just bought a Rollo a few weeks ago and used your settings. It prints out very clearly with those settings.
Glad it helped!
I don’t have a Rollo printer but I want to tell you that you’re always so thorough in what a great way to share information that you know others would benefit from. Right now I just still use my normal ink jet printer because I print from my phone wireless I don’t make enough sales to deem the bulk fast printer yet maybe one day I will thanks so much Steve always watch your videos and always looking for that tumi bag!!
Appreciate that! Positive Tumi thoughts to you!
You went right to the point and were very organized! Super helpful and thank you
Glad it was helpful!
THANK YOU SOOOO MUCH! I just got my rollo today and was bummed it wasn't printing nicely. Your video was super helpful. Appreciate it!
Glad it helped! They are great printers, after first few should be fine, clean the heat bar once in a while w/ alcohol wipe- I think its explained in instruction book
@@PickRoll yes, perfectly explained. Thank you! 🙏
@@HJartistry your welcome
Thanks for sharing this Steve, I have found the settings that it comes with work just fine but this is great info. The Rollo was the best purchase I have made for my business.
thanks
I've been having that problem. Thanks for the quick tip. I'm going to try it when I get home.
Glad to help.
Great Video, My Posh Labels always print lighter than my Ebay labels with my Rollo for some reason hopefully this will help. Thanks Steve Your the Man.
Thanks Andy. Yes same here, even on density 8, they still are not as dark as ebay, but better than default of 6. Not sure why that is. No, your the man!
me too, I assumed it was because I was downloading my posh label. (too lazy to put my email on my laptop...)
Thanks for the video - I found it helpful! Appreciate it!
glad it helped
Perfect, your a good teacher. I'll do mine now. Thank you!!
Appreciate it, thanks
I recalibrate mines again , it works now
Good.
you sir are the best!
Appreciate it, hope it helped
Perfect! Thank you.
You're welcome!
Nice video Steve. My Rollo prints faint and I’ll check my settings again when I get home.
thanks
Thank you for this video!
Glad it was helpful!
thank you I'll try it out and see how it works. my labels were coming out grainy. i was disappointed.
First few did when brand new, but then cleared up. clean with alcohol wipe once in a while also helps
Thank you. Very helpful
Glad it was helpful!
Thank you very much for your help and for making it easy to understand:)
Your welcome, glad it helped
Thank you this worked great!
Glad it helped!
Thank you! This helped me out a lot.
Glad it helped!
Thanks for the information.
Any time!
excellant info. Thank you
Glad it was helpful!
Awesome video. I love my Rollo. Thanks Steve
Thanks Anthony
Well, I’ve got the bar code and most darker. But the return and send to address are still very faded. Weird huh?
For what site, ebay? Is it new?, mine improved after a handful of printings
very helpful and I appreciate the comparisons thank you
Glad it was helpful!
Very helpful video thank you!
Glad it was helpful!
Thanks . I almost return my printer . I will try it later
hope it helps
Thank you. This helped me a lot! 👍🏻
welcome
Thanks, it was very helpful
Glad it helped
Thank you!
You're welcome!
This was really useful thank you!
Glad it was helpful!
Thanks for this, very useful
thanks
VERY HELPFUL ,THANK U SO MUCH
Glad it was helpful! your welcome
Thanks so much
You're welcome!
THANK YOU SO MUCH, YOU HELPED MUCH!!!!
Glad it helped!
So though it helped the density on label it still did not scan at the post office and I’m at the highest density. Is there anything else I can do? Thank you much
@@RosaG77799 Is it brand new? try cleaning the inside heat bar with a alcohol wipe.
@@PickRoll k.
@@PickRoll but I do not remove anything right? And if that does not work what else can I do?
Thank you so much!
You're welcome!
Dymo guy here, but nice video Steve.
Thanks Dan
I need a Thermal printer. Although you have this one you’re showing, do you recommend the same one for others to get?
No complaints with Rollo. I researched before and it seems to be better than dymo. I never had dymo so cant say much, but I do read/hear about issues with dymos but none with rollo. Plus dymo uses specific labels, Rollo you can buy any or get free from ups
hi i'm having trouble with small fine print of the labels/coupons. is there a way to adress this. i tred your steps and i got a darker label 👌👌
Whats the problem? is it blurry?
Thank you so much for this tutorial. I had no idea you could change those settings.
Can you please recommend how to adjust the rollo paper to make labels and invoices print in the middle. They either print too small or too big and cut off bar codes. I have tried to figure it out but no success. Thanks in advance.
When your print screen box opens (where the settings to choose which printer, # of copies,etc) make sure the size is set to 100mm x 150mm
Your welcome, glad it helped
Ok, I will try that. Thanks alot.
I have the Rollo printer and use the "Rolo Virtual Hi-Res Printer" driver to print 1,000+ labels per month. The print quality is very good and no special adjustments were needed. Have you compared the two Rollo Drivers to see which gives the best print results? Just curious! Thanks :)
I only see 1 driver on rollo site. I ggogled what you said and don't see anything except the 1 driver from rollo. Where did you download it from? thanks
Mine is making a bunch if cracking and snapping sounds when printing, suddenly. If I print a test page from windows, no problem. If I print from an app.... loud cracking. Google search says to adjust the speed/density settings but I hadn't ever changed these and still loud after changing them
Not sure. I would call rollo tech support
Thanks for sharing 👍❤️
thanks
What if I have a Mac? My computer doesn't have the same settings as the example provided.
Sorry not sure.
good video :)
Thanks!
is there any way to make the address lettering a bit bigger on the label?
its all or none, cant adjust only one part of label. But if your settings are for 4x6, it is standard and shouldnt be an issue
I got my brand new rollo and some of the words is hard to read when it prints. Looks faded. So I tried your way, and it still doesn’t work. Did I do something wrong or do I need to try a different way
for me the first few labels were light but then it got better. not sure. even though its new can try cleaning heat/printing bar(silver bars inside) w the alcohol wipes.
I finally got my Rollo thermal printer, and my density is still coming out light even at 10. I don't know what to do, I don't if printing from different places is making a difference (such as a browser vs photo viewer), any ideas? I am trying to print a Mercari label, after rotating it. Any advice would be helpful, Thank you.
weird, depends what your considering light. it doesnt have to be dark black, but it should darken with settings. Mine was light at first but got better after a few printings.
Print from adobe
@@itsvicky2682 thanks, I print on my mac now and it's working out. Thank you.
Why is it forced to be on 100*210?
If I make a custom 100*150 I have no way to change it to it.When I click print the only custom that shows up is 100*210.I cant delete 100*210 either.
My other problem is it is not printing the box line next to priority on the left.I want it to print the whole label like your are I guess I will try the 100*210 setting.
I put it on 105*145 and that is the closest to normal I can get it.
What am I doing wrong?
Thanks for the help anyone.
not sure , I know 100mm x150mm is the 4x6 which mine is set at
@@PickRoll The default 100mm x150mm doesnt print right for me so I either have to do the custom one which cant be anything but 100*210 or use 105*145.
It is stupid to have a custom setting that cant be deleted.Plus if I make a new one I cant switch to it.
You clearly are just a lucky one where the default just worked right off.
@@DanRaidersWarriorsSharksGiants Dongt know, I do change it for printing the bulk scan sheet, but change back to 100 150. You also need to set it to 4x6 on certain sites(ebay, poshmark...)
@@PickRoll I am using it for ebay and yeah it is on 4x6 but it is ok as long as 105*145 works I wont have any problem.
Hello, I have some 4x2 labels that I want to print. Is there a way to set up the printer to print that size? I'm not seeing it. Its printing across 2 labels. It's not for amazon it's my own personal labels I'm trying to print out. Thanks
check this out, should help.... support.rolloprinter.com/support/solutions/articles/29000000808
what settings do I adjust for my 2.25x1.25 labels? please help!! thank you
This is about print density/darkness and print speed. it ajusts the printer so will be for any label. If you asking how to change for a different size I don't know, I only use 4x6
Do you know how I can stop my rollo printer from printing out the same label over and over...i print my labels one by one..i feed in one label at a time..it prints the label I need..if I feed in another label..it reprints it automatically...l i literally have to click it off then back on to...to reset it..is there a setting I can turn on or off for this issue?
Why feed 1 by 1? do you have a roll or folded stack? if so put in label and leave attached to stack and see if it keeps going. could be a thing where printer thinks it ran out and didnt complete print- just thought, oherwise I dont know.
@@PickRoll I think I figured it out...thankyou for responding!
@@TheSHAY1806 what was it?
@@PickRoll my printer was trying to learn the label..and also if it feels like the label was printed incorrectly it will try to print it again.
Hey when I try and print on my label everything so small and it dosen't take up the whole label like you'r do.
change ebay label printing preference to 4x6 zebra. Its on page where you buy and print label
Hello! For some reason my rollo printer is only printing 1 page out of the rest, the rest will just come out blank. Why is this happening? I'm using a MacBook Air.
Hi, sorry not familiar with Mac
I’m trying to ship an actual customer label but my rollo keeps printing the John Doe label instead of the current label I selected. Any idea of fixing this
Have you printing ok before or is this very 1st label with new rollo?
Pick & Roll the former. I’ve printed the sample label several times (mostly on accident lol). I’d place my label at the back of the printer and even when I don’t click print it’ll print the John Doe out of nowhere
@@billbandoh5818 hmm, when you put 1s label of roll/stack in and close the top down, it should feed thru 1 label(blank) then be set. My question was have you printed other labels for items correctly with no issue?
Pick & Roll yes recently I have for my 1st order (happy about that). I’ve noticed that there are many failed prints in the queue and I believe anytime I turn on the printer it prints the old backed up files. If that makes any sense
@@billbandoh5818 very weird, I'm not sure. I would contact rollo, they have support link and chat on their site
how do you fix prints coming out as 8x11. ups and paypal website keeps printing regular
You have to change settings on each website.
how ?
@@fobguy714 I dont priny from ups so dont know. For paypal, click the Gear Icon in the far top right corner--On the left-hand side, please choose Shipping--Under Shipping Preferences, click Update--Pick Label Printer and one of the 4 x 6 printers--if you have a rollo just choose one of the Zebra 4x6
--
- Choose Account Settings
How do I change it to a mac
Don't know, I don't have a mac sorry
Thanks for taking the time to reply.
@@uglycollections Sorry couldn't help
hi please help. i put my setting on 8 and it still comes out light. i just unpackaged and set up my rollo idk whts wrong
The first few can be kind light, mine was, but after a few labels it was better
@@PickRoll ok thanks so much for your help ur the best! Have a blessed day❤🙏🏾
@@topneverstop your welcome. same to you
Can someone tell me can we use a phone to print labels using this
This is not wireless. Not 100%, but I dont think you can, unless there is an adaptor that I dont know about
mine only prints half the label and i wasted like 30 labels trying to fix it and i dont know what to do :(
Top/bottom half or side half? Did you set your ebay label to 4x6? do you hav your computer print setting at 100mm x 150mm?
Anyone know how to do this on a Mac?
I don't
My Rollo is printing blank all the sudde
Not sure, rollo website has support- contact them if needed
ALSO, did it start right after you changed/loaded new labels in? if they are upside down it wont print because the bottom material is non printable material.
Hi friend,I need you help,with my rollo printer pls
whats problem?
@@PickRoll ,I conected the printer Rollo to hp pavilon laptop,,I downloaded the drivers too,then I print test, and the print print label and small size label,I tried diferente ways and I cant doin,I want set up label 4×6
@@PickRoll ,you have very good Chanel in youtube, I like yours videos
@@PickRoll ,if you can hello me to sep up by washap, I will pay you sent
Having so many issues with this fricken thing. Can't make fedex or ups lables on ebay cause I have a MacBook and all the apps are paid if you want to crop and adjust a pdf. Hence why these thermal printers are trash.
Sorry , Not sure about macbook setup/settings
This thing is very annoying and is always printing blanks it takes me about 100 tries to print one label
Thats not right, I never experienced that, something isnt right. I would contact rollo see what they say.
Pick & Roll I will try that. I just print them on my regular printer and use tape for now . I have too many orders to wait on that printer lol. Thanks !
my 6 setting looks like your 2lol
They do print light at first
Thank you !
You're welcome!
Thank you for the video!
Glad it was helpful!
Thank you! Really helped me a lot!
Glad it helped!
Perfect, thank you!
Glad it helped!
Hello...good info. I am trying to create stickers. The first one is perfect but when it prints the second one its off center. I am using 2.25"x1.25" sticker labels. I have not changed any setting, would you know why the 2nd label would go off center?
Sorry , i don't use that size so never had that issue