Dude! you are a national treasure. I would never have thought I could put the wear sensor in after the calipers..you just saved me a ton of time and work. I needed to replace a sensor that came loose and shredded. pulled the wheel and replaced the sensor. done in 10 minutes..thank you!
Awesome video, easy to understand the entire step-by-step process. Thank you for the Mercedes Sprinter Service Video series that you are creating. Have a great day.
Razvan Neacsu Yeah! what do you mean by wrong? it is fine to put anti seize lubricant on the caliper pins! I'm curious to know what you use to lubricate caliper pins!
@@KITS_Auto_and_Truck_Repair Anti seize lubricant ,the lubricant evaporate soon and left aluminium /copper powder to prevent rust trough. It will work like dry lubricant, but carbon powder is better. I will prefer hi temperature silicone grease.
Sir, this is, by far the best brake video I've seen!!! Thank you so much. Very detailed, including the specs for torquing the bolts.
@95ffd Thank you!
Best detailed video out there on Sprinter van
@MarcPrice-e9y Thank you!
Dude! you are a national treasure. I would never have thought I could put the wear sensor in after the calipers..you just saved me a ton of time and work. I needed to replace a sensor that came loose and shredded. pulled the wheel and replaced the sensor. done in 10 minutes..thank you!
@DarrenPierson My Pleasure! Thanks
Awesome video, easy to understand the entire step-by-step process. Thank you for the Mercedes Sprinter Service Video series that you are creating. Have a great day.
Cheecho Pukido My Pleasure! Thanks
You are a great mechanic and teacher. I watch all your sprinter Videos/lessons. Please keep on doing what you are doing.
Barry Coble Thank you!
You are an excellent teacher. Thank you.
Luke Andresen My Pleasure! Thanks
Good step by step video, even a lad can understand 👏 👍
Billy Noble Thank you!
Excellent . " TOTAL " ! .
@jerrylambert8794 Thank you!
Great Video well explained cheers Darryl from Australia
@darryljohnston1284 Thank you!
Great step by step and very easy to follow!
Ladeisha Williams Thank you!
Very well done!
@johnroberts277 Thank you!
-The best of the best here! What marvelous work 😊 thank you for sharing it!!!
DinhaS My Pleasure! Thank you! I appreciate it!
very nicely described
@hasanqaiser Thanks!
Great video thanks
@johns9070 My Pleasure!
Great video.
@theeaskey Thank you!
Great job and excellent video
maur_palm palm Thank you!
That was great!
@keenedgedesigns Thank you!
My brahda, give Thanks 🙏🏾
Afriking Afriking My Pleasure!
Does it have Drums in the back??
@salvadorzavala6110 it has rotors in the back!
Thanks K
Tapiwa Mutedzi My Pleasure!
You don’t put grease underneath the pads shims you put on top😅
@yhshah21 it's ok to grease top and bottom!
Only one think , on the brake bolt should be used tread lock instead grease.
@igorurbanek8217 what bolt exactly?
thats anti seize you are putting on the pins :)) wrong!
Razvan Neacsu Yeah! what do you mean by wrong? it is fine to put anti seize lubricant on the caliper pins! I'm curious to know what you use to lubricate caliper pins!
@@KITS_Auto_and_Truck_Repair Anti seize lubricant ,the lubricant evaporate soon and left aluminium /copper powder to prevent rust trough. It will work like dry lubricant, but carbon powder is better. I will prefer hi temperature silicone grease.
@@igorurbanek8217 Good to know, thanks!