Test Fitting Chassis & Body | VW Beetle Restoration
ฝัง
- เผยแพร่เมื่อ 30 ก.ย. 2023
- Today we test fit the chassis & body | VW Beetle Restoration
This 1965 Beetle was forgotten in a field in South Georgia for 40 years. Let's bring it back to life. ctmoog - ยานยนต์และพาหนะ
I seen a lot of people use contact cement to tack down the rubber seal to the floor plan before putting the body on. Though it is an extra step, and it takes a day or so for the contact cement to set in, it seems to work for many out there.
You did an excellent job with this bug.
Fantastic job!! I remember watching you bring this Dub home!!! Have to say how much I admire your shop! Top notch space! ....
Thank you! Yes, it's been just over a year. It's my brother's shop. It's a great space to work.
Looks good the way it is. I wouldn't lower it. Just repaint the wheels, put some caps and you're good to go!
I would even leave the wheels with the patina.
Original wheels looks way better than anything else on a VW bug or bus. It looks either cheap or too fancy with other rims.
I agree. Keep the rims and I personally don’t get the lowering thing. Maybe I’m an old guy and value comfort over looks.
I agree, don’t lower. The original patina look will make this one stand out.
Well it's going to stay this way for a while! =) It's stating to grow on me.
I wouldn't leave the tank rusty. Rust never sleeps. It will spread to internals.
Yes CT , it looks like a real beetle again. Great work 👍👍
Thanks buddy 👍
I don't know if you have given any thought to the finish for the car yet, but if you have not and plan to keep the patina on the car, a product I have seen used on a few other channels is something called pappy's patina, its a wipe on clear that protects the original finish. Another one comes from vice grip garage called shine juice. Looking great and glad to see it all coming together!
All is looking so good CT !
I like that off white /beige painting so much !
The side bars in beige looks elegant 👍
The only thing I 'd like is sanding the tank, because all looks so nice and clean inside
But this is my persnal impression .
Big day a long time coming. I bet you are thrilled.
Yes, it's feeling pretty good.
Hello CT,
Work in progress !
Amazing !!
Bravo from France
I would clean up the fuel tank. Unless you can coat the rust to stop it from progressing any farther. I have a 1970 red convertible that needs some work but it runs great. Thanks for all your hard work.
Starting to look like a car again CT! I agree with you - headliner BEFORE windshield! Also, it helps to get the dash in place as well.
Thanks Greg!😎
كل شيئ بالعمل والجد والمثابرة رائع مثل هذا العمل. يقول الله سبحانه وتعالى "اعملوا فسيرى الله عملكم ورسوله والمؤمنون" وفقكم الله واصلوا هذا مهم جدا تحياتي من مدينة الحسيمة المغرب
Bonding the gasket to the floor pan is the easiest way, with something like evo stick or similar
Hot glue in a few key places works too.
Glad You popped up as I am in a similar project . ( funny how that happens) Just recently rejoined the body and chassis on My 69 vert . Thought it went pretty well until I put the doors back on. Had to do some adjusting on the mounts but finally got it. Just part of process I guess. These convertibles are flex sensitive. Any way,have fun! 👍👍🇺🇸
Convertibles have some strengthening members in the heater channel area; maybe even the heater channels could be different on convertibles.
@@vayabroder729 Yea, they have an extra support box rail outside of the heater channels, but still have significant flex with the top not secured.
Looks good just like that. I’d be tempted to buff out what’s left of the paint and rub some boiled Lin seed oil or some other similar stuff into the rusted areas. Mike FN probably knows the best approach. Fun car
Maybe something more permanent for the exterior like sanding down the raised rust, treating the metal to make a flash-rust then clear coat it.
All your hard work is paying off ct, she is starting to look like a beetle again, Nice, keep the vids coming. 👍👏🐞
On your gas tank, I'd put rubber(weather stripping) around the edges of your tank to keep it from squeaking. And replace all rubber (if you can). And you should coat the bottom of it because of all 5he weather it's going to be put through.
Good tips!😎
Great job ……. Love the patina look ……. Matt black wud look good …..
Nicely done CT!! The seals a pain sometimes.
Hi CT Its Looking Very Nice Wating For The Car Test Drive And The Fuel Tank Looks Great Condition Wating For The Next Video 👌👌👍
Great job CT, tank is very clean inside, to preserve, you should clean up and spray externally. Can’t wait to see the fender headlight replaced and repaired. Good work keep going and don’t be too mean with the paint !
Thanks 👍
I think that the wheels that you have on at the moment are nice
Loving it. Great work. I'd buy it from you if I lived in the USA.
Well watching you work gives me the motivation to continue ... I just got a 1966 VW Beetle myself yesterday Nov 4/23 I took
all the interior out, engine does not turns on and it has not been driven for 5 years, a customer of mine even gave me an engine with lots of extra parts, so this is going to be an experience cause I'm a tool man and not an active mechanic nor a body man as well. I'm almost retired and at 66 years young doing all this work together with my son it's going to be an adventure.
Today I pressured washed the whole bug, inside and out and to my surprise the whole floor has been "Cannibalized" with just a plain thick metal floor so yes lots of rust and wrong welds all over on both sides, it's a big, big mess ... But hopefully I'll get it done , slowly and learning daily as I progress. Thanks for your videos and hoping to continue following and learning from experts on VW Beetle's Regards
Looking good!
Thanks!👍😎👍
This one is coming along great! Super work CT
Appears you have learned a lot in last few years.!!!
Thanks buddy 👍
Texas, see what happens when you believe in yourself...txs for sharing
You've come so far I love your videos 😊
Thank you! =)
Loving this build. Coming along really nice. I would paint the dash and make the interior look perfect while maintaining the exterior patina. I’ve seen a few like that and personally they look really cool.
I might do that! =) Thank you
Looks great!
Thanks 😎
Love seeing it come together!
Great stuff!
That’s a beauty sir.
Damn it boy! You are amazing!! Greetings from Sweden!
I appreciate that my friend! =)
No, the appreciate is all om my behalf.
Looking and lining up fantastically! All your hard work in aligning things carefully has paid off. I hope you didn’t forget the two rubber bushings for the body on the rear shock towers. West Coast Metric has all the rubber doodads for good prices and great quality. Re the height it will settle lower once you install the motor and drive it a bit. I would keep the ride stock and the original wheels and hubcaps to stay with the patina theme. You can find a new headlight bucket just like the Duckman installed on a Super Beetle.
CT
Good morning
This video is so wondetful, that I almost may feel the thrill with this stage.
I just might Say "take it easy", and think about it again
It is a Great video
Nice job in spite of all of the expert advice! Been fun watching you learn along with the rest of us.
Looking good 😊
Thank you! 😊
Yay back to the vw
i cant believe you actually almost finished a restoration of 64 beetle after one year👍
Loving this VW series
😎😎😎
I love these videos, I'm rebuilding a 74 bug of my own and these videos are a tone of help... you should test that sending units float seeing as it's plastic and could have holes from age and the continuity of the sender to see if it's sending a signal...
Great idea👍 good luck on your 74! Thank you😎
It's almost looking like a car! Well done. So much progress has been made since the days of Rusty. 👍 While I'm not expert, I did learn to drive in an old Beetle, and I'm pretty sure the chassis is sitting up way too high. IIRC they had around 2" clearance to the fender, maybe a bit more.
Geez. You make it look so easy!!
Great job CT.very good
It's come a long way! Looking good. At this point I'd be really tempted to do the rest of the body work and paint it rather than leaving the patina. I might even go so far as to make a Herbie.
I agree...paint it
Everything is looking great! I’m hoping to start a big build myself here very soon
Before you take the body off, you might do the work to the doors and fenders to get a better match body and paint. I think you have something to be proud of and think it would be cool to drive it to the up coming car show.
Hi My Dear Friend Very Great Job ❤❤❤❤❤
Parabéns o fusca muito top meu amigo
Ótimo trabalho, parabéns CT.
Sou do Brasil e aqui tem muitos fusca.
Observei que vcs chamam de besouro, aqui pra nois somente os anos de 74 e 75 saíram a série especial chamada besouro com motor 1.600 e alguns acessórios a mais que os comuns.
Vc está de parabéns pelo conteúdo do vídeo e pelo seu trabalho
Looks great CT !
Hey CT, looking sweet! I kind of like how it looks with just the original patina, no need to over simulate with red paint, IMHO.
Looking great man awesome job
That's great my friend. Probably you got a job for me I would like to learn how to do that. That is amazing.
can't wait to see this baby rolling down the road.
actually really like the almond color for a rattle can paint
a spray adhesive would've helped with the rubber seals to keep them in place
That tank was perfect
Good.job. cool car VW congratulations Nice job😄👍👍👏👏👏
Looks really good you did a good job
Looking great, I would paint the tank personally
Man she’s looking good CT.! I can believe how great that gas tank looks inside! I would say lower the front a few more inches. And boy she’s gonna look sweet!👌🥰👍 lol 😂 by the way! I was browsing on the video through your garage! And I noticed on top of that steel locker you have a 50-60s Nylint Michigan crane! I have one exactly like yours in my garage shelf!👌😂👍
a spray adhesive that carpet fitters use would of been ideal to keep that body seal in place bud
Fantastic job looking forward to seeing the future videos.
CT, you may want to paint the drums before they rust. Granted you may want them to blend with the patina…
Yeah….slo mo is killer. The acting there at the end….nice!
Looks great. Excellent series too.
Wouldn't it be best to treat the rust on the gas tank exterior with rust stabilizer at the very least? Maybe coat the bottom with Por15 or the like and coat the interior too?
Hey mate you're doing so well, you should be so pleased with yourself. Well done!
1.You asked about the front - it is quite high at the moment, but will settle down when you get things like the tank fitted. Get the car going first and then thing about lowering it further. Isn't your front beam adjustable?
2.Yes there's a lot of play in the steering, it may need a new steering box.
3. In my humble personal opinion the perfect new running boards look quite odd next to the rusty patina panels. It's your car to play with, but I'd think about dirtying up that shiny chrome strip if it were mine. Likewise the fuel tank - a good coat of something like Hammerite on the bottom will protect it (nobody can see it anyway), and as for the top - inside your trunk is all new and painted, so I think a dirty old fuel tank would look wrong. If it were me, I'd give it a good sanding down to clean and smooth it then paint it satin black.
4. There's a big rectangular gasket to go between the fuel tank and the body.
5. You can get a headlight bowl (bucket?) as a separate item, new. Just weld it into your old fender.
Daleee Carlos Torres saludos desde Parma Italia, vamos que este puede ser el primer auto que termines.
I really like the almond color. You should let go of the patina and rattle can it in almond. The almond color looks very good next to the running board.
Yes, it looks pretty sweet! =) Thank you!
Looks great CT. The height seems a bit excessive. Did you replace the spring plates in the front end and the torsion bars in the rear? I noticed when you put the rubber body mounts on the front end the lower mounts were perpendicular to the opening. That might prohibit the front end from sitting flat, which will affect the height and even how the doors sit. Also, is there any play in the front end if you bounce on the front suspension? Any give? Might be worth exploring if the trailing arms don’t move when you bounce on them. With the engine in the car it will be a little lower in back… but it seems just a bit high. Maybe it will settle with the body back on? Regardless just awesome.
Thanks Jeff! I think I have the wrong bushes in the front. I ordered the correct ones this week
Since you know about suspension, can I put Gas A just shocks for better support because weight on the rear and also witch shock should I put on front to ride nice and work well with whati I got a complete oem suspension.
Great job
Eita está quase pronto, ficando muito lindo! 🇧🇷🇧🇷🇧🇷🇧🇷🇧🇷
😎😎😎
DAM CT. THAT LOOKS SWEET GREAT WORK👍
Thanks Atom! 👍
Hey CT, are you thinking about putting a finish on the patina to preserve it and stop rust spread? I love the look.
I love the look also but it's not for everyone. I'd fix that fender dent and clear it. Patina to die for.
Muito bom, estou acompanhando desde o início da restauração, e torcendo pra ver ele todo pronto, tenho um ano 74.
Looking good CT. The front and rear will settle a bit once everything is in the car and you start moving it around. get everything in the car before you start adjusting the height.
congrats man ...amazing
I wasn't expecting to wake up to Christmas morning, that thumb nail should pull in 10,000 views, Merry Christmas🎄and here's your gift Matt Armstrong 911 GT3🎁almost a quarter million views, good job.
Last one I did we used windshield sealant to glue the seal onto the chassis in the right shape and place. You can also use a loop of dental floss though the hole in the seal lift it a tiny bit the pull on the floss to move the seal at each bolt hole until it lines up.
Looks nice paint fenders under neat in white keep outside patina and crome Hudson caps and ready to hit the road
That restoration is surely going great! The front and rear suspension seem to be too high though. There should be a space of, at least, a couple inches between the fenders and the wheels. That's my experience with my 1970 bug, at least. However, after changing that steering box, fitting the gas tank and checking the shock absorbers, you can give it a look again and adjust the front suspension, if necessary. Way to go!
Hallo tolle Bilder aus USA und das von deutschen Autos VW Porsche 914 Karmann und so weiter und tschüss aus Düsseldorf 🇩🇪👍👍🤵🏻
it has come a long way
Looking good ct. So the Doors need to be welded on the underside? Soon its a complete car👌🌹
Yes, more work on the doors and fenders soon. Thank you! =)
weather stripping could be seam sealed (glued) in place on frame first or fastened with self-tapping screws with thin flat washers. So many ways to do place prior to joining to body.
If you want the gas tank to last, then you should remove the rust and paint it.
Awesome fit CT, looking forward to the door repairs. I'm sure Mike is too.
Use some 3M spray tack for the seal to hold it to the pan..
Sticky just enough to hold in place but easily removable if needing to replace.
I like the build but I would definitely fix the rest of rust n holes n paint it all new
Hi those nails look like carpet tacks to me. Yes looks great way to go keep it up . A magician could not have done their tricks any better than U did good job . If U want to leave the tank rusty try and sea if their is a clear rust protective spray so that it does not get any more rust , it's looking good . Latter
To hold your weatherstripping well, use spray adhesive, also called Gorilla Snot
You should clean the outside of the tank and spray rust converter on the outside of it to prevent any further rust on the gas tank!
good idea!
Spray some glue on seal and body, it’ll hold seal.
The trick to getting that body chassis seal exact is upholstery glue. Sorry, couldn’t watch to the end so I haven’t seen if you got it or crimped it.
Thanks man! I'll pick some up this week.
Excellent job CT!!! This car is gona to be incredible! Question, what happend with Rusty? Is finished? Greetings from Uruguay!
Why do you have to take it apart again?
I don't know why you would leave the bottom of the fuel tank rusty even if you want to keep the patina look on the parts you can see. The bottom of the tank will not be visible and it would be only sensible to rustproof and paint it to retard further deterioration and potential leaks.
Parker wants her bug painted haha
HAHA! What color would she like it? =)
😂😂
Yellow and black rims
Fantastic work but should the floor be flexing like that under your foot? A little strong glue should hold the rubber seals in place