Don't get any ideas that I know anything because I don't. But I did see one video where they said take a regular number two pencil and put rubber bands around it maybe that would work for some banjos down at that last fret instead of having to hold on to the capo. Which by the way I do not have a capo yet so again I don't know anything but I just thought of it because I heard of it before and thought I would put it in here in case it would help anybody.
I used a plastic pen, pushed it down hard at the last fret, had a capo on the first as Joe shows, and had my .012 card ready to measure at the 12th fret. worked like a charm.
Tom, thanks so much for this video! I have a question about tone rings. I’m a clawhammer player and am getting a banjo build. What type of tone ring do you recommend for bell like sounds and longer sustain? I’m considering a little wonder vs bell rose or whyte lady tone ring. Also how much does wood contribute to sound? Thanks for any suggestions! Best! Jorden Weiss
Thank you, Tom. I have an old five string my dad gave me years ago and I am trying to make it playable. I am also learning the banjo after years of playing classical guitar. The skills translate somewhat.
I leaned on a classical too, recently switched to nylon banjo strings and the difference in tone (open back, warm and rustic sound) and familiar feel has made all the difference, I’m not playing with the picks on my fingertips though, just a hybrid of my bad-habit classical fingerpicking / clawhammer patterns.
Thanks for the video, Tom! I've been slowly adding some of your banjo parts to my banjo, :). One question I have is how can I determine if there's a fret problem vs an action problem? Do you measure action relative to the fretboard or the top of the fret? I don't live near an expert luthier, so I'm trying to do the work myself without breaking my banjo. My issue is that I get buzzing on my D string (fourth string) both on the low frets and near the 12th fret. I've tried following your set up videos, bought two different nechville compensated bridges so I have three bridges (including the original) between 5/8ths and 11/16ths. I got the buzzing to go mostly away, but it seems like it came at the cost of a really high action. Almost smack dab at two pennies above the 12th fret. Thoughts? Thanks again!
Well explained but I missed two pieces of info: to decrease the bow and lower the action, are you turning CLOCKWISE or COUNTERCLOCKWISE? And the 10 thousands of an inch action, is that at the 10th fret? Thank you!
Hi Tom. Great vid. helps take the "mystery" out of adjusting the neck. very useful information. are those instruments hanging on the wall behind you are banjo's also? Thanks for posting :)
Just bought an rk 35. The action is 1/4" at the bottom fret. How do I get it down to 1/8" . I also got major vibration noise mostly on the middle G string? I noticed the center string on the bridge has a v shape cut on the side. facing the neck. >| . I switched out bridges and the other bridge helped but don't sound near as good as the ss. I don't think that's a truss rod adjustment.
I started at 27ish thousands and ended at 12 thousands. Before starting, just my third string had a buzz. Now all of them buzz. Any suggestions on what to try next?
I got into playing banjos a little over a year ago now about he start of covid. While I still appreciate this to the moon, this would've been invaluable to me at the time haha. Thanks, Mr. Nechville!
Oh, hxll! I despise truss rods! Can't stand the damn things! They are a bane to my musical existence. I never know which direction to turn it. Its high time I learn how to adjust one. Thank you for your video.
Thanks so much. I can set up my guitars but was a little unsure about setting up my banjo and my tone was suffering in the last year... I have the feeling my buzzing comes from the bridge, not the neck... any tips for this?
Understanding the whole system involves getting sufficient bridge height on each string. If you still have buzz after setting bow, raise bridge height. You also may benefit from a fret dressing. Sloppy bridge slots alone rarely cause severe audible problems. Call me for the perfect custom bridge. 612-275-6602.
What about for left handed banjos ?? Do they have the same trust rod adjustment to take off the bow like right hand banjos? Or are lefty ones fliped flopped opposite?? Wanna make sure before I do it. Lol I looked everywhere online can never get an answer. Just want to know if it's the same .clockwise tighten . And u counter Is when it gets bowed up ? My banjo is bowwed. Lefthanded shredder over here.. oh and if lefty guitars Rods and righty guitar Rods the same ?? Thanks a bunch !
Definitely the same as right handed. Occasionally you’ll find backwards threaded rods or plenty of them that do nothing. Buy a Nechville for peace of mind.
Good video. But half the stringlength to mesure the clearence should be around 7 th or 8th fret. You are mesuring between 2 and one third of the length
when buying a 4-5 thousand usd banjo i expect it to be perfect or is it more common on chinese made banjos like morgan i have a 5 stringer Morgan(made in china) cost only 800 usd
You are correct. Check the video at about 8:50 and you will see that a clockwise turn as looking down the wrench will lower the string taking more of the bow out of the neck
![[🔴LIVE] งานประกาศรางวัล MAYA TV AWARDS 2024 : มายามหาชน](http://i.ytimg.com/vi/nwmWYXXVwBY/mqdefault.jpg)
Thank you, Tom!
That is very helpful information. Thank you.
Thanks Tom, I love precision!
Great video Tom.... this was exactly what I was looking for as I had quite a large gap in the string action.
Don't get any ideas that I know anything because I don't. But I did see one video where they said take a regular number two pencil and put rubber bands around it maybe that would work for some banjos down at that last fret instead of having to hold on to the capo. Which by the way I do not have a capo yet so again I don't know anything but I just thought of it because I heard of it before and thought I would put it in here in case it would help anybody.
I used a plastic pen, pushed it down hard at the last fret, had a capo on the first as Joe shows, and had my .012 card ready to measure at the 12th fret. worked like a charm.
Tom, thanks so much for this video! I have a question about tone rings. I’m a clawhammer player and am getting a banjo build. What type of tone ring do you recommend for bell like sounds and longer sustain? I’m considering a little wonder vs bell rose or whyte lady tone ring. Also how much does wood contribute to sound? Thanks for any suggestions!
Best! Jorden Weiss
So, I'm assuming that to tighten the truss rod in this example you turned it 1/4 turn clockwise from the top to tighten correct?
Yes he didn’t mention which direction
Finishing the video he shows tighten to be CW and loosen to be CCW.
Thank you, Tom. I have an old five string my dad gave me years ago and I am trying to make it playable. I am also learning the banjo after years of playing classical guitar. The skills translate somewhat.
I leaned on a classical too, recently switched to nylon banjo strings and the difference in tone (open back, warm and rustic sound) and familiar feel has made all the difference, I’m not playing with the picks on my fingertips though, just a hybrid of my bad-habit classical fingerpicking / clawhammer patterns.
Thanks for the video, Tom! I've been slowly adding some of your banjo parts to my banjo, :). One question I have is how can I determine if there's a fret problem vs an action problem? Do you measure action relative to the fretboard or the top of the fret? I don't live near an expert luthier, so I'm trying to do the work myself without breaking my banjo. My issue is that I get buzzing on my D string (fourth string) both on the low frets and near the 12th fret. I've tried following your set up videos, bought two different nechville compensated bridges so I have three bridges (including the original) between 5/8ths and 11/16ths. I got the buzzing to go mostly away, but it seems like it came at the cost of a really high action. Almost smack dab at two pennies above the 12th fret. Thoughts? Thanks again!
What next? Head tension, bridge size, etc. I would love a video going through a complete setup. I own a Nechville Diamond Joe. Thanks!
I have several other videos, but I’ll be doing more. I should design a series that covers a complete set up
Great video, thanks
Well explained but I missed two pieces of info: to decrease the bow and lower the action, are you turning CLOCKWISE or COUNTERCLOCKWISE? And the 10 thousands of an inch action, is that at the 10th fret? Thank you!
Lovely Tom I appreciate you so much for this invaluable information thank yoiu
Thanks! How would you modify the procedure for a long neck?
I think I would do the same thing. It is possible that a little more bow should be allowed in neck but use the trial and re- trial method.
Thanks it is really helpful
Hi Tom. Great vid. helps take the "mystery" out of adjusting the neck. very useful information. are those instruments hanging on the wall behind you are banjo's also? Thanks for posting :)
Thise are Comets! Our new electric banjos, great for travel quiet practice, and rocking out with electric amplification.
@@nechvillebanjos Mercy
Sir thank you so much for this video!
So, the clearances and suggestions for this example would work on the old style hook and rim versions if they have a truss rod?
Just bought an rk 35. The action is 1/4" at the bottom fret. How do I get it down to 1/8" . I also got major vibration noise mostly on the middle G string? I noticed the center string on the bridge has a v shape cut on the side. facing the neck. >| . I switched out bridges and the other bridge helped but don't sound near as good as the ss. I don't think that's a truss rod adjustment.
I started at 27ish thousands and ended at 12 thousands.
Before starting, just my third string had a buzz. Now all of them buzz.
Any suggestions on what to try next?
I got into playing banjos a little over a year ago now about he start of covid. While I still appreciate this to the moon, this would've been invaluable to me at the time haha.
Thanks, Mr. Nechville!
Oh, hxll! I despise truss rods! Can't stand the damn things! They are a bane to my musical existence. I never know which direction to turn it. Its high time I learn how to adjust one. Thank you for your video.
Thank you
Thanks so much. I can set up my guitars but was a little unsure about setting up my banjo and my tone was suffering in the last year... I have the feeling my buzzing comes from the bridge, not the neck... any tips for this?
Understanding the whole system involves getting sufficient bridge height on each string. If you still have buzz after setting bow, raise bridge height. You also may benefit from a fret dressing. Sloppy bridge slots alone rarely cause severe audible problems. Call me for the perfect custom bridge. 612-275-6602.
What about for left handed banjos ?? Do they have the same trust rod adjustment to take off the bow like right hand banjos? Or are lefty ones fliped flopped opposite??
Wanna make sure before I do it. Lol I looked everywhere online can never get an answer. Just want to know if it's the same .clockwise tighten . And u
counter Is when it gets bowed up ? My banjo is bowwed. Lefthanded shredder over here.. oh and if lefty guitars Rods and righty guitar Rods the same ?? Thanks a bunch !
Definitely the same as right handed.
Occasionally you’ll find backwards threaded rods or plenty of them that do nothing. Buy a Nechville for peace of mind.
@@nechvillebanjos thanks man!!
Good video. But half the stringlength to mesure the clearence should be around 7 th or 8th fret. You are mesuring between 2 and one third of the length
when buying a 4-5 thousand usd banjo i expect it to be perfect or is it more common on chinese made banjos like morgan i have a 5 stringer Morgan(made in china) cost only 800 usd
“Perfect” varies for different people. Also weather and age can change even expensive banjos so they benefit from periodic adjustments.
You didn’t mention which direction you turn it. You started to say it and then got sidetracked.
You are correct. Check the video at about 8:50 and you will see that a clockwise turn as looking down the wrench will lower the string taking more of the bow out of the neck
And yet... you should also be talking about those awesome-looking electric banjos on the wall...