I had playground and market set. Tried to soften the plastic too using hot water but didn’t work. I got it done but the table legs broke easily. Thats kinda of a pain coz you gotta glue it back on and lost a couple of them too. I was very happy when I got it painted and done. Enjoy painting them next. 😎👍🏼
You only use hot water before they cure. That’s why it didn’t work. Using nippers and a hobby knife carefully is best. Yeah the seven dogs 🐕 are going to be a pain. But I look forward to the challenge. Thanks for stopping by and watching Dru, be blessed my friend.
It’s fine, just so long as you’re doing something fun. I try to do my videos on the fly, no script. It gives a more homey feel. I want to do lives but it’s hard to keep up with chat. Thanks for stopping by and watching Dave, be blessed my friend.
😂🤣😂 I actually found it, but it’s to fiddly to put back on. For the most part I’m happy with them, when I start my HO self layout, I shouldn’t have as many fiddly bits to deal with. Thanks for stopping by and watching Mystic, be blessed my friend.
I have not trimmed supports off a print yet so can't really give advice, but would a thinner jaw nipper maybe make it a little easier.. ? They are definitely detailed for as small as those models are. And I have trolls as well, I post a non train video and get, " this ain't trains, I come here for trains", and some "Advice" on how to manage my time.. like you need to do this or that, at the same time they them selves don't do it on their channel.. oh well what ya gonna do.. another reason I started the other channel. As you know you do you and we will watch or not. .. have a great rest of your weekend.
It’s ok Pappy, I watched a lot of videos on the subject, plus talked with my co-workers whom work with 3d prints on a daily basis. I will always do me, there isn’t anyone else I can be, unless one of my other personalities takes over🤣😂. The supports were tedious, but I over came for the most part. I still have like 5 or 6 dogs 🐕 to clean up. Thanks for stopping by and watching Pappy, be blessed my friend.
Hey Eric these look pretty good. I'm thinking a chisel edge Xacto Blade heated up would make easy work of clean those supports. I never did this so it could be a total fail ! Take care
I got them mostly cleaned up. Just have 5 or 6 dogs 🐕 to clean up. Thanks, they’ll look better when primed. Thanks for stopping by and watching Jerry, be blessed my friend.
I don’t mind the haters, I actually laughed when I read what they commented. By the way I checked out the hater channel, and they had like two videos, none on trains or modeling. I try to keep it real and simple. Thanks for stopping by and watching Thomas, be blessed.
Thank you for sharing, Eric. I enjoyed the vibe of just kinda hanging out with you while you worked on your models! I feel like we could hang out and work on N scale stuff in person if we lived closer! Love the 3D printed resin, stuff. It absolutely amazes me how much detail you can get with a resin printer! Keep enjoying your channel, my friend - appreciate your outlook on life!
I just keep in real my friend. What you see is what you get. Thank you for the kind words. Yeah the resin models are the bomb 💣. As to my outlook on life, I have my dark times, but no need to dwell on that. The sun WILL come out sooner or later. Thanks for stopping by and watching Seth, be blessed my friend.
@@acrranscaleandlifejourney4330 yup, and that’s one of the things that I appreciate so much about you. You be blessed too, Eric! Have a great rest of your weekend!
I hate it lol 😮jk it was nice setting here talking to you but what I don't like is that guy you bought those from he should of removed those supports I would never sell something with the the support still on that is my opinion we all have trolls 😅 can't wait to see those painted
🤣😂🤣 glad you hated it 😂🤣. He said he left them on for shipping. And to hell with trolls. Might be a while before anything gets painted. If you have FB messenger please check it. Thanks for stopping by and watching Dwight , be blessed my friend.
Oh I definitely let them hate, and was very nice to them. And I love doing what makes me happy. If I didn’t I wouldn’t be doing videos or 🚆. I love interacting with all of you in the community. Thanks for stopping by and watching Jenny, be blessed my friend . P.s. I love my job, so I do that too.
Wow... once cleared, those are some sharp prints, Eric! Very cool!
I had playground and market set. Tried to soften the plastic too using hot water but didn’t work. I got it done but the table legs broke easily. Thats kinda of a pain coz you gotta glue it back on and lost a couple of them too. I was very happy when I got it painted and done. Enjoy painting them next. 😎👍🏼
You only use hot water before they cure. That’s why it didn’t work. Using nippers and a hobby knife carefully is best. Yeah the seven dogs 🐕 are going to be a pain. But I look forward to the challenge. Thanks for stopping by and watching Dru, be blessed my friend.
I don't do model trains, but as I've been working here at my desk, it's been fun to listen to you talk, almost like we're hanging out again.
It’s fine, just so long as you’re doing something fun. I try to do my videos on the fly, no script. It gives a more homey feel. I want to do lives but it’s hard to keep up with chat. Thanks for stopping by and watching Dave, be blessed my friend.
like trying to find an N scale rear view mirror in a stack of rear view mirrors :D cool prints!!
😂🤣😂 I actually found it, but it’s to fiddly to put back on. For the most part I’m happy with them, when I start my HO self layout, I shouldn’t have as many fiddly bits to deal with. Thanks for stopping by and watching Mystic, be blessed my friend.
I have not trimmed supports off a print yet so can't really give advice, but would a thinner jaw nipper maybe make it a little easier.. ? They are definitely detailed for as small as those models are. And I have trolls as well, I post a non train video and get, " this ain't trains, I come here for trains", and some "Advice" on how to manage my time.. like you need to do this or that, at the same time they them selves don't do it on their channel.. oh well what ya gonna do.. another reason I started the other channel. As you know you do you and we will watch or not. .. have a great rest of your weekend.
It’s ok Pappy, I watched a lot of videos on the subject, plus talked with my co-workers whom work with 3d prints on a daily basis. I will always do me, there isn’t anyone else I can be, unless one of my other personalities takes over🤣😂. The supports were tedious, but I over came for the most part. I still have like 5 or 6 dogs 🐕 to clean up. Thanks for stopping by and watching Pappy, be blessed my friend.
A very interesting project , will look great when completed
Hey Eric these look pretty good. I'm thinking a chisel edge Xacto Blade heated up would make easy work of clean those supports. I never did this so it could be a total fail ! Take care
I got them mostly cleaned up. Just have 5 or 6 dogs 🐕 to clean up. Thanks, they’ll look better when primed. Thanks for stopping by and watching Jerry, be blessed my friend.
Nice job Eric. Those are going to look great once you get them painted.
Thank you, I hope I do them justice. Thanks for stopping by and watching TwoRailfans, be blessed my friends.
Haters are a sign your videos are getting some traction. Keep doing what you're doing. Haters gonna hate. I like the honesty of your channel. 😎👍
I don’t mind the haters, I actually laughed when I read what they commented. By the way I checked out the hater channel, and they had like two videos, none on trains or modeling. I try to keep it real and simple. Thanks for stopping by and watching Thomas, be blessed.
Thank you for sharing, Eric. I enjoyed the vibe of just kinda hanging out with you while you worked on your models! I feel like we could hang out and work on N scale stuff in person if we lived closer! Love the 3D printed resin, stuff. It absolutely amazes me how much detail you can get with a resin printer! Keep enjoying your channel, my friend - appreciate your outlook on life!
I just keep in real my friend. What you see is what you get. Thank you for the kind words. Yeah the resin models are the bomb 💣. As to my outlook on life, I have my dark times, but no need to dwell on that. The sun WILL come out sooner or later. Thanks for stopping by and watching Seth, be blessed my friend.
@@acrranscaleandlifejourney4330 yup, and that’s one of the things that I appreciate so much about you. You be blessed too, Eric! Have a great rest of your weekend!
I hate it lol 😮jk it was nice setting here talking to you but what I don't like is that guy you bought those from he should of removed those supports I would never sell something with the the support still on that is my opinion we all have trolls 😅 can't wait to see those painted
🤣😂🤣 glad you hated it 😂🤣. He said he left them on for shipping. And to hell with trolls. Might be a while before anything gets painted. If you have FB messenger please check it. Thanks for stopping by and watching Dwight , be blessed my friend.
Let the haters hate and keep doing what makes you happy! -Jenny
Oh I definitely let them hate, and was very nice to them. And I love doing what makes me happy. If I didn’t I wouldn’t be doing videos or 🚆. I love interacting with all of you in the community. Thanks for stopping by and watching Jenny, be blessed my friend . P.s. I love my job, so I do that too.
@@acrranscaleandlifejourney4330 Perfect! Have a great weekend