@@mastersmods yeah not bad, wrapped a few things in my career although you have to be tight with the cuts or you see a slither of chrome. the surrounding plastic/rubber is really stiff, normally you can get away with a tuck on most trims.
Great content!!! The joys of double-sided tape and side skirts there's no point in trying to use a cheap inferior tape go for 3M and read through the spec sheet a lot of times you have to use heat to get a strong bond 🤞🤞 Hope this helps
Cheers mate, I might try the heat gun on it and hope it bonds better 😂 both times I've used 3M as I thought it would be better than better than cheaper stuff, buy cheap buy twice kind of thing. Will give the heat gun a go though, thanks
The wire of the knifeless tape tends to crawl to the inside when you make bends. I think happend with you also on your front lip. You can see it when it happens and reposition the tape. But you have to know it before you see it. Better luck next time. Keep up the nice work.
Always the small changes that make the biggest difference top work brother
Cheers brother 🙏
Looks really tidy mate, love seeing little bitty jobs like these getting done. Great touches
Cheers mate. It's the little things that can make a big difference sometimes
A lot of little things done in this vid mate,all good😃🤙🏻🤙🏻
Took me weeks to find the Time to get them all done as well mate 😂 got there though and really happy with it now
I acctually did my trims in gloss black last week.
How did you find it?
@@mastersmods yeah not bad, wrapped a few things in my career although you have to be tight with the cuts or you see a slither of chrome. the surrounding plastic/rubber is really stiff, normally you can get away with a tuck on most trims.
@@adddictionsGTP yeah stiff AF isn't it
@@mastersmods certainly is lol. your ride is looking great now mate.
@adddictionsGTP cheers mate appreciate that 🙏
Car looks good buddy, keep up the good work
Thanks matey 🙏
Great content!!! The joys of double-sided tape and side skirts there's no point in trying to use a cheap inferior tape go for 3M and read through the spec sheet a lot of times you have to use heat to get a strong bond 🤞🤞 Hope this helps
Cheers mate, I might try the heat gun on it and hope it bonds better 😂 both times I've used 3M as I thought it would be better than better than cheaper stuff, buy cheap buy twice kind of thing. Will give the heat gun a go though, thanks
dam im gunno need todo more to my corsa lol your catching up with mods... car is looking nice mate your getting there
I want smooth front bumper next 😉
@@mastersmods get it done
@TwoSpanners when you free 😂
@@mastersmods when can you drive down lol
@@TwoSpanners see you soon 👌😂
Where did u get ur steering wheel cover just subbed
Wheel finesse mate and thank you 😎🙏
New subscriber - I've got loads to catch up on! Where did you get the carbon mirror caps please?
Thank you! They were off the wife for my birthday, I'll try find out for you dude
@@mastersmods legendary, many thanks
@flangewaffle they were off ebay she tells me. If you want a item number, I'll try get one for you
@@mastersmods don't bother her mate, I'll find them. Many thanks!
The wire of the knifeless tape tends to crawl to the inside when you make bends. I think happend with you also on your front lip. You can see it when it happens and reposition the tape. But you have to know it before you see it. Better luck next time. Keep up the nice work.
Ah cheers mate I'll try watch out for that next time 👍
@@mastersmods had the same issue before... 😉
@pepeuters7647 thank you for passing on the knowledge mate 👍 it's always good to share information like that
new subscriber,lokking for advice on a vxr either a corsa or astra,help
Thank you 🙏 what do you need to know mate
Can i ask did you have to inlay the top part of the rear bumper
The only inlay I did on the rear bumper was the recess for the number plate
Gloss back looks better, xx
Surprises me that but thank you