super clean! ive had a very similar idea for the tinyhawk 2 freestyle, only using 16x16 stack in the front and a nano vtx and nano elrs module stack in the back, all on some sort of custom mounting plate for the tinyhawk's special mounting holes. havent dont it yet 'cause a 16x16 stack is like $65 right now lol
I have a 20x20 mamba stack. The FC has MPU6000, hard to come by these days, it’s also packed with features. Instead of going for another FC of a smaller foot print I’d rather file the stand off about a millimeter deep ensuring it doesn’t touch and get some heat shrink over the filed notch, just in case. What do you think about this idea sir?
Hello Cube. I finished building my Smart35 with 20x20 F722 40A Mamba stack. 1404 3750KV motors on 450mah 4s. It came out amazingly well, but I’m unable to get a good tune on it with BF 4.3. Any help will be appreciated.
@@crash_lander You can take a look at this page on my website - cubefpv.com/blheli32-setup-main-page/ This is my standard setup for BL32. Thisis a good place to start. But it doesn't go into tuning. If you want to get into tuning you will need to look for a detailed tuning guide. Check out Chris Rosser's channel for a BF tuning guide.
![[TH] 2024 PMSL SEA Finals D1 | Fall | ยิงต้องโหด ให้เหมือนโกรธกันมาก่อน](http://i.ytimg.com/vi/OnTdfGySmds/mqdefault.jpg)
super clean! ive had a very similar idea for the tinyhawk 2 freestyle, only using 16x16 stack in the front and a nano vtx and nano elrs module stack in the back, all on some sort of custom mounting plate for the tinyhawk's special mounting holes. havent dont it yet 'cause a 16x16 stack is like $65 right now lol
I have a 20x20 mamba stack. The FC has MPU6000, hard to come by these days, it’s also packed with features. Instead of going for another FC of a smaller foot print I’d rather file the stand off about a millimeter deep ensuring it doesn’t touch and get some heat shrink over the filed notch, just in case. What do you think about this idea sir?
Sanding 1mm may be okay but whenever you start sanding FC boards there's always a risk you could damage it.
I’d never do that. What I want to do is, file a notch in the aluminum stand-off exactly where the FC board is touching my.
@@crash_lander Oh okay then that sounds fine. Should work as long as there is clearance.
Hello Cube. I finished building my Smart35 with 20x20 F722 40A Mamba stack. 1404 3750KV motors on 450mah 4s. It came out amazingly well, but I’m unable to get a good tune on it with BF 4.3. Any help will be appreciated.
@@crash_lander You can take a look at this page on my website - cubefpv.com/blheli32-setup-main-page/ This is my standard setup for BL32. Thisis a good place to start. But it doesn't go into tuning. If you want to get into tuning you will need to look for a detailed tuning guide. Check out Chris Rosser's channel for a BF tuning guide.
Will this frame fit a nebula pro camera?
Yes the frame is designed for any 19mm camera.
I see, so if thats the case how did it fit the smaller nebula pro nano camera?
@@elsonalbao4824 If you are fitting a 14mm camera you will ned to use spacers between the camera and the side plates as well as longer screws.