This is such a great vid. Before I watched this I didn't know anything about basic wiring of LEDs, soldering or resistors. Now I'll be confident to do some myself. Top job
Thank you very much for your explanation. I'm just a step on trying myself 😄. I lived in Ireland for 5 years and I couldn't help myself of thinking you sound 'slightly'😄 Irish. I'm sure I'll be wrong. I'm watching videos like a crazy because I have a lego rocket I want to light (the thrusters) and I'm figuring out how to do it. Cheers from Spain ♥️
Pity I did not find your video earlier. After months of thinking about it I did my first LEDand resistor and it works. Your method of twisting the wire round beats trying to line them up on a helping hand. I fluxed and tinned but I see you did not, I will have to try that. Great video for a nervous modeller with electrics. I have subbed. Barry.Devon
Thanks for the informative vid Dave. I'm working on a small Christmas project in a display picture frame. I need to wire 6 purchased 'O' gauge LED street lamps in line along the inside base of the box picture frame. They are each 3V, 20mA lights that have the resistors to solder if required. I want to run them off two AA batteries or a 9V battery. I feel confident enough to solder them as you instructed. Already drilled the holes and have the wires hanging out the bottom of the frame. Each lamp is approx 3 inches apart. My question is can they be soldered together in line away from the battery source. In other words soldering a resistor between the two positive wires of the lamps and solder the negative wires together for a line of six coming off the battery with the first in line wired to the battery? Any input will be gratefully appreciated. This would not be looped back to the battery. From the furthest LED. BATTERY---->RESISTOR----->LED----->RES----->LED----->RES---->LED---->RES----->LED----->RES----->LED---->RES---->LED I'm creative but not technically edumacated lol Appreciated any input :-)
I might be totally wrong here, but I understood that a resistor has to be wired in the correct way according to the coloured bands ie there is an 'input' and 'output' way to use them. I'm happy to stand corrected it's a long time since I've used them.
Hi, I have a little project I'm working on and was looking to do it myself but you mentioned could purchase from yourself, basically I'm building a avp prodos dropship with led lighting, so what I was needing was contact information for the purchase and discuss costs n what I'm needing measurements spacing etc, I came here just looking to work it out for myself but it's going to be a lot of money buying all the bits needed just to make it for 1 model, so if you could send me a link to the shop or something or details that would be appreciated thanks n thanks for the video 😊
![[TH] G2 vs PRX | EDG vs FUT - VALORANT Champions 2024 DAY 4](http://i.ytimg.com/vi/Bkr_qM7dIaM/mqdefault.jpg)
![บุษบา - วงชานเมือง [LiveCoverVertion] Original : เมนทอล](http://i.ytimg.com/vi/Dm81sKcd9rs/mqdefault.jpg)
Excellent video. No waffle, simple to understand. Thank you
This is such a helpful video for a newbie... brilliant, thanks!
Thank you Dave. Great basic soldering course and familiarization with LEDs.
New to your channel, like the comment below, a really useful tutorial for a newcomer returning to the hobby. I have now subscribed👍
This is such a great vid. Before I watched this I didn't know anything about basic wiring of LEDs, soldering or resistors. Now I'll be confident to do some myself. Top job
Thankyou so much! The most useful video I have used so far.
Thank you very much for your explanation. I'm just a step on trying myself 😄. I lived in Ireland for 5 years and I couldn't help myself of thinking you sound 'slightly'😄 Irish. I'm sure I'll be wrong. I'm watching videos like a crazy because I have a lego rocket I want to light (the thrusters) and I'm figuring out how to do it. Cheers from Spain ♥️
Thank you very much
This video is outstanding for a total noob like me. Thanks a bunch
That was exactly what I needed, thankyou
Pity I did not find your video earlier. After months of thinking about it I did my first LEDand resistor and it works. Your method of twisting the wire round beats trying to line them up on a helping hand. I fluxed and tinned but I see you did not, I will have to try that. Great video for a nervous modeller with electrics. I have subbed.
Barry.Devon
Brilliant video
Very helpful Dave, take's a lot of the wiring 'mystery' out of it.
Do you have a follow on on how to connect multiple street lights to one point?
What a Nice video 👍you Got a new sub from 🇩🇰
Thanks for the informative vid Dave. I'm working on a small Christmas project in a display picture frame. I need to wire 6 purchased 'O' gauge LED street lamps in line along the inside base of the box picture frame. They are each 3V, 20mA lights that have the resistors to solder if required. I want to run them off two AA batteries or a 9V battery. I feel confident enough to solder them as you instructed. Already drilled the holes and have the wires hanging out the bottom of the frame. Each lamp is approx 3 inches apart.
My question is can they be soldered together in line away from the battery source. In other words soldering a resistor between the two positive wires of the lamps and solder the negative wires together for a line of six coming off the battery with the first in line wired to the battery? Any input will be gratefully appreciated. This would not be looped back to the battery. From the furthest LED.
BATTERY---->RESISTOR----->LED----->RES----->LED----->RES---->LED---->RES----->LED----->RES----->LED---->RES---->LED
I'm creative but not technically edumacated lol
Appreciated any input :-)
I might be totally wrong here, but I understood that a resistor has to be wired in the correct way according to the coloured bands ie there is an 'input' and 'output' way to use them. I'm happy to stand corrected it's a long time since I've used them.
That's ok. these resistors are not polarity dependent they can be fitted either way round.
The coloured bands identify the value of the resistance
Great video, thanks. Do you have to use resistors? I’m making miniature single lights so only one led. Also what size wire do I need? Thank you.
Hi what size its wire for G Scale street lights .
does this work with normal light bulbs?
Thanks very informative.
Hi I want to use 10 LED in layout do I have to use one resistor or individual for each LED.
Each LED requires its own resistor
@@westwonic depends if the LEDs are to be in a series or a parallel circuit.
What type of wheels the name or brand for this prodject or do I use standard micro scale n scale wheels
Hi, I have a little project I'm working on and was looking to do it myself but you mentioned could purchase from yourself, basically I'm building a avp prodos dropship with led lighting, so what I was needing was contact information for the purchase and discuss costs n what I'm needing measurements spacing etc, I came here just looking to work it out for myself but it's going to be a lot of money buying all the bits needed just to make it for 1 model, so if you could send me a link to the shop or something or details that would be appreciated thanks n thanks for the video 😊
Hi where would I get the battery to power the led's? And how would you hook the wires to the battery? Thanks
Radio Shack or other Do-it-yourself retail or online outlets sell various size batteries and the proper holders. Soldering iron works the best.
I use candle to insulate.
no mention of flux being used nowdays not all solder has flux in the wire.
yea, i was wondering about that.....