Bandit Industries SG-75 Stump grinder 500 hour review

I added a little topic at the end of the video. A couple side notes I forgot..
No issues with the remote at all !!!
Make sure you spin all your grease fittings that have the pins when greasing ( on swing cylinders)
Also they should add a brace from the back of the key station to the 2 square tubes that the hydraulic cooler is mounted to, to minimize the station from vibrating and rattling so much when traveling down the road
Lastly I drilled two small holes on the back rubber flaps when traveling thru a gated fence. I bungee cord the two flaps across the boom pivot to help the flaps from rubbing or catching the fences.
thanks

[@treetechsprofessionalarborcare]

Nice video bandit should take some
Input and fix those small issues

[@tonybabineau5642]

Very nicely done I bought my machine January 2021 so I'm guessing it's a 2020 my machine doesn't have those slide pads my machine also doesn't have shear pins I have 400 hrs I also have a 2018 bandit 2550 but back to the sg75 I chech my machine over on Sundays and power wash it I haven't noticed any broken welds or cracks but the 1 issue I have and it happened at 25 hrs that the right track came off and it's a pain to put it on if you have alot if chips but my the track was coming loose quite often so dealer replaced the tensioner. But the track still comes loose at least twice a week I have to put blade and cutter wheel down to tighten it also on the chip blade the earlier model had a flimsy blade mine bent first week took it to dealer and they replaced it with the new thicker blade no problems with it.im very happy with this machine. I want to thank you for making this video you did bring to my attention is that you mentioned on cutter wheel ever other metal strip you replaced im going to check mine first thing tomorrow thanks again for making video

[@AATreeService]

Honest opinion…. With the cost of a machine this size, is it actually something U can make money with?

[@kellermanslandscaping8625]

Any tips on minimizing tearing up turf? Like turf tracks or something?

[@daylenlathers9866]

I'll go back and forth multiple times if I have to or I just bring plywood for tight turns

[@lakeerietreeservice2452]

Go one 2 yrs ago I got a vermeer 1152 and my rayco rg85 will out sump 2 to1 worst stumper ever owned in the shop more then used been thrown 4 clutch to just junk!!

[@AATreeService]

English?????