As a drummer who loves progressive metal/metal/heavy I compliment you or whoever put together the music the show and the themes.... RIGHT FUKN ON! Polish up them turds 😂❤
I sure appreciate Pete’s choice of words while making these videos. He is very careful to chisel nothing into stone unless it’s absolutely necessary. Hopefully I’m growing with this line of wisdom myself. I have a small home based shop. I often encourage people I’m doing work for to take a look at this channel. I do not mean to come across as a confirming source rather that I use these works as confirmation to my processes. Thank you for allowing others this opportunity.
Brother , I am working on my first swap. Ls3/6L80 03' Crown Vic Police Interceptor. I was going to bring my block to you to get worked over till I seen you were like 3 hours from me. I am in Fayetteville, Nc. It needed 1 sleeve and bored. If the block wasn't so cheap I would be building a 6.0 lol
Great videos, look forward to each one. With the deck being out .005" from the valley out now being corrected is the O-ring depth now have .005" difference from valley side to outside of block and will you even it out?
5:05 might be an illusion or something but I have to ask... does your stair want to go somewhere? that ummm what is it? 2x 16 or 18 plate on posts is umm.. lose or..? me working on construction makes me look here and there, can't help it
@assaultlick2169 it's pretty much an abrasive wheel off of a surface grinder made into a tip that's silver soldered to a hss insert body. They are extremely expensive though due to the multiple steps of making them
You should start selling your music. Heck there’s a channel I watch that these goof balls fix small engine and they wear the hill billy teeth and make music and they sell cds and stuff. Your music is pretty cool, I bet you’d sell more than you think.
You guys do good work. Mind you that you title is not synonomous with respect for anyone who doesn't have 100k to spend on their ride. I almost didn't start watching, and that would have been a shame.
you need to do more in each video, 11 minutes of video for one process without even going that in depth to explain said process, is excessive. And you need to level your audio WAY fucking better. it goes from listening to you talk, at roughly 55-60 decibels, to raging guitar solo at like 90 decibels and it is fucking obnoxious
So , let me get this straight . . . composing the music, playing every instrument and recording it . . . operating the camera, editing and producing the measly 11 minute ' tid bit' along with impromptu jokes, accompanied merchandise while teaching you how an elite winning professional decks a top fuel ringed small block Chevy is by no means " In need of " . . . The solo was glorious and I TURNED IT UP TO A SOLID 100 DECIBLES. Of course I'm just teasing you brother, stick around I'm sure you will dig the content, this one is just getting started.
“this song is absurd… But I sing every word-ord-ord”
His songs are catchy AF😂
@@nataliedeyton6829 I get these songs of Pete’s stuck in my head!
@@nataliedeyton6829I hunt for a buck
So catchy it's like an earwig
This video probably created some deck envy amongst the other machine shops 😮 😉
These Damn songs get stuck in my cranium
The music is awesome. I look forward to it every time I click your video
As a drummer who loves progressive metal/metal/heavy I compliment you or whoever put together the music the show and the themes.... RIGHT FUKN ON! Polish up them turds 😂❤
I sure appreciate Pete’s choice of words while making these videos.
He is very careful to chisel nothing into stone unless it’s absolutely necessary. Hopefully I’m growing with this line of wisdom myself.
I have a small home based shop. I often encourage people I’m doing work for to take a look at this channel.
I do not mean to come across as a confirming source rather that I use these works as confirmation to my processes.
Thank you for allowing others this opportunity.
I'm here for Pete's music. Literally! oh and because I like cars and racecars.
Excellent choice! You will get nice Ra numbers and great for MLS head gaskets.
Polishing turds might be my favourite part of your channel.
This song plays in my head while I’m at work in steel mill maintenance.😂 The things I have to do to make junk last longer🤦♂️
I really love this series
So satisfying.
Pete you rock literally! Love the polishing turds series. Peace
I thought that music was you. Badass🤘
Great information, thank you.
Next tee shirt cutting with space crystals man
Always a good watch and learn something every time
space crystals? that's amazing!
We need a album 🥳🥳🥳
yessss
Very luxurious
I've been a fan of Luxurious Decks since the 80s. Shout out #LD
Love every episode man, knowledgeable and entertaining!
Doing the lords work.
I've used the stick a drill bit inside on the drive side and grab with curved jaw vice grips heat as needed
Super cool episode.
The fastest 10-15 minutes of my life!! Love the content, looking forward to the next one!
ALWAYS INTERESTING PETE!...GREAT STUFF!
Your TV show is just right & luxurios to boot
That dowel remover looks like a blood blister waiting to happen.
I instinctively stuck the web of my hand in my mouth OWW OWW OWW 😂
Brother , I am working on my first swap. Ls3/6L80 03' Crown Vic Police Interceptor. I was going to bring my block to you to get worked over till I seen you were like 3 hours from me. I am in Fayetteville, Nc. It needed 1 sleeve and bored. If the block wasn't so cheap I would be building a 6.0 lol
I'm here for the comments
Y'all killin' it
Great content thanks for sharing
Your music reminds me of warrior soul. Great vid set.
Great videos, look forward to each one. With the deck being out .005" from the valley out now being corrected is the O-ring depth now have .005" difference from valley side to outside of block and will you even it out?
Nice work brother!
I like that ute alot
I could watch more of this 👍
Love the content
Thumbs up for song alone
Tools make the professional.
Aside from purchasing merch are there other ways to support you? Do you sell engine parts etc?
"space crystals" 😂
Who sings the song? It's awsome ROCK. I love how you do it with math and old school!!!
Good stuff👍
Do you check for square off the bore as well?
👍👍👍🤘🤘🤘👏👏👏
“We have the tools, we have the talent” love that, great video 👍🏻👍🏻
Does the deck surface finish have to be different for style of head gaskets? Thanks
Dang, Pete sure is good at doing a whole bunch of stuff. Wonder if there's anyhing he's into he aint good at
I literally tried to find this song on Itunes.
5:05 might be an illusion or something but I have to ask... does your stair want to go somewhere? that ummm what is it? 2x 16 or 18 plate on posts is umm.. lose or..? me working on construction makes me look here and there, can't help it
Cubic boron nitride
Was wondering what those magic space crystals were. Thanks, man
@assaultlick2169 it's pretty much an abrasive wheel off of a surface grinder made into a tip that's silver soldered to a hss insert body. They are extremely expensive though due to the multiple steps of making them
When do we get to see you helping reaper
Ok I seen dat dare speaker ma bob. So what music comes out of dat dare thingy????????
❤👍😁🇱🇷🤘 yes sir
tools make a big difference especially these days. if i didn't have a Milwaukee battery ratchet eg. id retire from mechanics altogether
CBN ?! That seems kinda excessive.
Love the vid but the music is to loud up down up down
You should start selling your music. Heck there’s a channel I watch that these goof balls fix small engine and they wear the hill billy teeth and make music and they sell cds and stuff. Your music is pretty cool, I bet you’d sell more than you think.
i used to watch that idiot tarryl fixes all until he spoke in favor of antifa and blm riots. he should be removed from america.
Metallica needs to watch the fuck out
You guys do good work. Mind you that you title is not synonomous with respect for anyone who doesn't have 100k to spend on their ride. I almost didn't start watching, and that would have been a shame.
Wut?
What a strangely unique compliment 🤔
Thanks for sharing
Good Tech. Thank You !
Do you need to adjust the China rails after a decking like that?
space crystals encrusting luxury decks......
This level of block prep indicates how many (expected) HP @ ???? rpm
always interesting
you need to do more in each video, 11 minutes of video for one process without even going that in depth to explain said process, is excessive. And you need to level your audio WAY fucking better. it goes from listening to you talk, at roughly 55-60 decibels, to raging guitar solo at like 90 decibels and it is fucking obnoxious
Go away then
So , let me get this straight . . . composing the music, playing every instrument and recording it . . . operating the camera, editing and producing the measly 11 minute ' tid bit' along with impromptu jokes, accompanied merchandise while teaching you how an elite winning professional decks a top fuel ringed small block Chevy is by no means " In need of " . . . The solo was glorious and I TURNED IT UP TO A SOLID 100 DECIBLES. Of course I'm just teasing you brother, stick around I'm sure you will dig the content, this one is just getting started.
Post your video so we can see how it’s done. Pete has probably forgotten more than you’ll ever know! What a Dick!