Здравствуйте. Очень нравятся Ваши видео. Думаю Вы не только большой мастер, но и отличный артист. Вижу как Вам не легко с ножнами. Попробуйте на первой половине заготовки, после того как вырезаете профиль клинка, обвести карандашом изнутри размер предполагаемых ножен. Затем просверлить по контуру тонким свёрпышком насквозь. Склеиваете ножны и обводите засверленые отверстия, используя их как точки.Получается контур с наружной стороны.Вырезаете по контуру и гарантировано не портите заготовку ножен.С огромным к Вам и Вашему труду уважением.Удачи Вам.
Not necessarily a sand blasting machine but a media blaster so you can use less abrasive materials like walnut shells or hard plastic bb. But yea it would be a great tool to add to the others tools he has like electrolysis, chemical baths, and wire wheels I liked the little shot pean roller and ultrasound cleaner. He’s got a nice set up
Very impressive restoration my friend I will admit it has its charm to it being all shiny and deeply pitted and I like that you copied the original handle and that you use flat head screws and not Phillips like most people would do keep up the good work
Now on the second pistol you restored again I would not have used Phillips screws cuz that's not time Correct but you still did a good job nonetheless keep up the good work
Also nickel-plating solution was needed. Since nickel-plating solution keeps the gun metal from rusting out again. It was the most trusted solution. Also MC51 rust remover. This revolver has the most amount of rust pockets. Just think of what we don't use anymore.
Considering the amount of original metal lost on the second pistol, and the fact that it was merely coated with a low temperature jacket of poT metal, and the paint covered a multitude of sins, I am sure that these relics will be put in a honored retirement and never attempted to be fired.
Fake video. Starts out with a percussion cap and ball gun and ends up with a break action cartridge gun. Now, that's what I call an amazing restoration.
Yo en tu lugar usaria agua con binagre antes de pasar un sepillo metalico dejaria remojar unos 3 dias cualquier arma asi avlandaria el oxsido luego el sepillo ária sufisiente luego eletrolisus y por ultimo limpiesa con algun limpiacarvuradores y resien ai comensaria a manioular el arma
Those pistols were too far gone to be saved. I would have hot blued instead of painting, but they are only good for decoration so i guess it dont matter.
Considering the state it was in originally I think you did a remarkable restoration job. Well done.
do you really beleive it?
You can only take things at face value. Or, you'll go through life doubting everything. That would be sad.
Nice 👍, congratulations from Cuba 🇨🇺
You did such an incredible work on this one, congrats
Amazing work! Awesome restoration!!!
Great shots and restoration!!! Greeting from Serbia 🇷🇸🇷🇸🇷🇸 NOLE champion 🏆!!!
The scenario is awsome! Nice work.
Здравствуйте. Очень нравятся Ваши видео. Думаю Вы не только большой мастер, но и отличный артист. Вижу как Вам не легко с ножнами. Попробуйте на первой половине заготовки, после того как вырезаете профиль клинка, обвести карандашом изнутри размер предполагаемых ножен. Затем просверлить по контуру тонким свёрпышком насквозь. Склеиваете ножны и обводите засверленые отверстия, используя их как точки.Получается контур с наружной стороны.Вырезаете по контуру и гарантировано не портите заготовку ножен.С огромным к Вам и Вашему труду уважением.Удачи Вам.
You got in you hands around 200 year Story Real Awesome Job my Respect 👏👏👏👏👏😎
Amazing 👏
You did amazing work on this projects. 👍👍
Excelente.
❤❤❤❤❤👋👋👋👋👋👋
So cool. It almost looks engraved.
Great work and nice video ! IT's amazing to see how the time is destructor 😬
amazing work --- WOW
Good job😎
Wow That's Percussion Revolver
Good and best 👍👍👍
Nice jobb......very much work........👍👍💯
I think you need a sandblasting machine
I feel the same way
You are making excelent Jobs.Before restoring Guns did you check bullets inside it
Yes sandblast with Glaspearls!
Very good to get rid of rust and it nearly don't touch the metal
Not necessarily a sand blasting machine but a media blaster so you can use less abrasive materials like walnut shells or hard plastic bb. But yea it would be a great tool to add to the others tools he has like electrolysis, chemical baths, and wire wheels I liked the little shot pean roller and ultrasound cleaner. He’s got a nice set up
Wouldn’t make as interesting a video though 😝
Excelente Restauración Maestros Restauradores de Objetos Ogcidados 👍🏽😃
Wow Really nice guns Smith work 👍👍Interesting video 👍👍🎯
Jajaja el empezar del vídeo me ha recordado a Homer cantando lo de "limpio mi escopeta sin el seguro ,sin el seguro" jajaja
I was gifted a .38 S&W once. It was rough (not quite like that) but still shoots. Not bad for something made in the 1880s.
Anyone else find it super cool how he ended up with a diygun at the end😂
This man can draw a straight line by hand cleaner then I can using a straight edge!
Well it should never be shot but is a nice conversation peace.
We gotta work on those welds bro….
Very impressive restoration my friend I will admit it has its charm to it being all shiny and deeply pitted and I like that you copied the original handle and that you use flat head screws and not Phillips like most people would do keep up the good work
Interesting video, great equipment and beautiful work! Bravo master!👍
I love these gun resto vids...
Buen trabajo. Tengo una pregunta: ¿funcionará?.
yes of course
Now on the second pistol you restored again I would not have used Phillips screws cuz that's not time Correct but you still did a good job nonetheless keep up the good work
JUST LIKE NEW!!!!!!!!!!!!!!!!!
that first one would go nicely matched with my Rapier the aging and pitting lol
No se si usas asido amuriatico pero creo despues de todo lo que ases y aun persisten restos de oxsido creo es una opsicion o no ???
Nice work If I were in your place, I would buy a sandblasting machine and save time cleaning, also with very high accuracy
O homem é bom mesmo
Thats a Ghost Rider Pistol.. 👌🏼👍🏼 (15:40)
Does it work?
Also nickel-plating solution was needed. Since nickel-plating solution keeps the gun metal from rusting out again. It was the most trusted solution. Also MC51 rust remover. This revolver has the most amount of rust pockets. Just think of what we don't use anymore.
Considering the amount of original metal lost on the second pistol, and the fact that it was merely coated with a low temperature jacket of poT metal, and the paint covered a multitude of sins, I am sure that these relics will be put in a honored retirement and never attempted to be fired.
Thank you for not taking the welder to them metal
Honestly I am shocked from the photographer that she is very professionall👍
Really Awesome Work. But your welding is lacking if you ask me
Great grandpa 🌝
did you paint the last one?
How do you manage to get every one of your guns the same amount of rusted?
Perfect gun for a Zombied Cowboy.
Will it shoot?
“It’s perfect”
А я уж думал до боевого состояния доведёт первый револьвер 😢😢
Бля и второй также....
its funny how that screw i on the left hand side looks like new and the rest of the gun is rusted to hell
good job!
しかしねビフォアのコンディション悪すぎ。
どうすればあんな風に?海底?川底?:(
👍👍💪
EVEN THOU THE GUN LOOK BADLY HE GUN CAME LOOK OK
Bàn tay vàng.
Thank you for a great vid!!! But I would of melted it down!!!
💯👍👌❤️
Fake video. Starts out with a percussion cap and ball gun and ends up with a break action cartridge gun. Now, that's what I call an amazing restoration.
অদৃশ্য মানুষ বানালো বিজ্ঞানীরা Hollow Man 2000 Explained In cinemon Bangla
J’espère que tu ne comptais pas utiliser une de ces armes, pour la séance de tir!
Didier
Вот это работа мастера
Quite a very tedious and careful restoration. I would have use some kind o metal filler to cover all the pits and make the weapon look better.
This would do well with some music
👍
29:14 revolver jumpscare
how to you get these rusted guns? donations?
Это даже не труп, это останки трупа.
Это покойный наряженый в сАван
I now pronounce you wall art.
Should’ve left it where you found it 😂😂😂😂
❤❤❤❤❤❤🎉🎉🎉
I mean... What he had left at the end was in the SHAPE of a revolver. That's definitely not a revolver anymore. More like welding shop art.
This gun looks a lot like the colt paterson
And that was a weapon skin i expect to use in rdr2 not some graver flowers
Зачем во второй части показывать то, что уже было???
Das wäre ein Fall für den Hochofen... woher bekommt ihr nur immer diesen Müll??
Pô esse cara acha que agente é bobo,não é o mesmo revólver não consigo terminar de ver um vídeo dele😂
45? I hve a 32Cal 1886 (Made in Italy in 1970) Navy Gun but this looks larger. at this point only 8 min in so my perspective may change.
Yo en tu lugar usaria agua con binagre antes de pasar un sepillo metalico dejaria remojar unos 3 dias cualquier arma asi avlandaria el oxsido luego el sepillo ária sufisiente luego eletrolisus y por ultimo limpiesa con algun limpiacarvuradores y resien ai comensaria a manioular el arma
Isso lá presta mais só pra ifeite
Это не реставрация , это безнадёжная порча раритета ...((((((((((((((((
fill in the pits with j b weld or liquid ssteel looks horrible now yuk
$5 to get you to realize you really wanna see it finished too. Lol
Hi
who's here after a tiktok guy only uploaded part 1
Those pistols were too far gone to be saved. I would have hot blued instead of painting, but they are only good for decoration so i guess it dont matter.
the revolver would look more interesting if you didn't grind it. Rust shells give a better look
I want to see it fire 😂
use a petrol bro...
That's not the same gun at the end. 2 entirely different types of guns.
He worked on two different guns. One after the other.
@@chewiescustompuzzles You're right. My bad.
Still wouldn't fire it
Probably doesn't need one
Dang, I really wanted to see how they were going to remanufacture the nipples
🤘🥸🤘
It’s not even the same gun at the end.
Stop posting the same videos multiple times
The same? This one is new🤔
@@Irusssska The restoration of the Webbley revolver not.
Handle not that great.
i call that "cleansing and reshaping", not "restoration". This gun lay unusable.
You done as bad as well you could with that gun. I wouldn’t fire it.