@MichaelRestoration well to be honest I truly loved it. It goes to show you that you take your time to and do your own way to restore. Besides, for what it's worth just be yourself and do what you want to do. And keep doing for what's right for you. You have my full support 👍
jesus, buying a fresh chain is a lot easier and cheaper then bringing it back to life this guy's got hell and deadly serious i mean this man is real. huge respect!
@@randomriddle539 You restore it to a level based on your economic situation. For what these boys have to work with, they did a commendable job for sure.
because this is not a restoration, restoration is the reconditioning of a vehicle to its original shape and condition, whereas this is not an original motorbike but a motorbike that has been made into a costume, He himself doesn't even know what kind of Kawasaki this is?
I know people take criticism personally but sometimes it can be constructive. Replacing the chain and rotors/brake pads is just as important as the tires. Thats just maintenance.
@ you also need to take into account what you restore. A moto chain has a life, if it gets rusted, you need to change it for safety reason. Not everything needs to be restored.
Agree and desagree at the same time , as long as the chain pass the tension test you good to clean , remove any rust and regrease … but is normally more expensive and can damage the bikes like the crowns getting eating by the chain shake
restoration is amazing , props to that. I thought replacing the bushings, chains and chain sprockets as a set would be better since it a matter of safety no? .
I find 2 eplanations. 1.Because there are so many people who never do anything but think they can do it better. Basically idiots, no need for further explanation on this one. 2.Some people are used to watch some other restoration channels where the guy work a lot (A LOT) better than this one. For example, I don't complain about his work, but it really bothers me so much that he didn't give the bike a proper washing before start dissasembling it... not even a quick rinse. So...
Of course, I take my hat off to the author for the work done. But the chain could have simply been replaced with a new one. If the old one was stretched to some extent.
Nice but what’s with the small bursts of loud music and also why is there scrapping sounds when there’s wasn’t any scraping or was fast scraping sounds when it was done slowly. Did the video editor have burst panic attack or something. It was good until a few burst of music kicked in! Then you could see the paint peeling off as the tyres were put on!
I also paint the wheels before making them dent free... And the electrical toothbrush got me really hard. Nice one also the more rusty tool bit to screw back the brake finished me off.
Its an interesting vid for me but u gotta work on the audio man. Some parts were music some were asmr and some part the audio does not tally with the video. And camera was too close to objects some time. Improve them and u would have better vid keep it up
I have no doubt, he is good at Restoration, just one piece of advice, please hire or practice editing video before posting it. So much time wasted on unnecessary details. Good job.
@MichaelRestoration well to be honest I truly loved it. It goes to show you that you take your time to and do your own way to restore. Besides, for what it's worth just be yourself and do what you want to do. And keep doing for what's right for you. You have my full support 👍
Nabeil 👮⭐⭐⭐⭐✍️☕🍰☕🍰 3:31
First time i see someone do a restoration and wash a chain, instead of replacing it...
jesus, buying a fresh chain is a lot easier and cheaper then bringing it back to life
this guy's got hell and deadly serious i mean this man is real. huge respect!
@@Min-pz7vm lucky the tires is still inflated..
RRC RESTORATION is the beast! ✨
shabby restoration
lighten up dude. they did a commendable job for sure.
@@FrankBonessa restoration is all bout perfection, getting it back to factory stock quality
@@randomriddle539 You restore it to a level based on your economic situation. For what these boys have to work with, they did a commendable job for sure.
It's called a restoration, not replacement. The idea is to make the old look new again. Effort is used in place of purchasing replacement parts.
True👍🏻
Hermooooosa moto
Good job But this bike is not 20 year old bro this bike is ninja 300 first production year is 2012 😒😒 pls change it your thum nail 😅😅
And they put on a zx-10 r decal. lol
So 2012 wasn't 20 years ago🤔🤔🤔 i must've been born yesterday. Delete this comment bro.
@@DanteM-l5d my age is 12 years old bro 2012 😂😂
@@DanteM-l5d2012 was 12 years ago that’s if it was a very first year production bike.
@@DanteM-l5d😂😂😂😂
You delete your comment is not make sure 😂😂
Why so many hates on this comment section...Anyway sir, you done a great job❤
because this is not a restoration, restoration is the reconditioning of a vehicle to its original shape and condition, whereas this is not an original motorbike but a motorbike that has been made into a costume, He himself doesn't even know what kind of Kawasaki this is?
why does it look like zx-10r from aliexpress?
😂😂😂😂 it comes with fake rust and mud delivered
yes your right
Yes, and the zx-10r is an inline-four. This comes with two😂.
It's a Ninja 250R(probably around 2008) with busted ZX10R bodywork badly fitted to it.
And he restore this shit.
I know people take criticism personally but sometimes it can be constructive. Replacing the chain and rotors/brake pads is just as important as the tires. Thats just maintenance.
Very nice work 👍👍👍
Super 👌
Who restores a chain? Why? That needs to be replaced. This must be the worst resto on TH-cam.
Is a restoration !!in opinion
@ you also need to take into account what you restore. A moto chain has a life, if it gets rusted, you need to change it for safety reason. Not everything needs to be restored.
Agree and desagree at the same time , as long as the chain pass the tension test you good to clean , remove any rust and regrease … but is normally more expensive and can damage the bikes like the crowns getting eating by the chain shake
@@Danutzz2010 facts right here!
Why are the tools just as rusty or dirty as the bike?
restoration is amazing , props to that. I thought replacing the bushings, chains and chain sprockets as a set would be better since it a matter of safety no? .
Super Arbeit weiter so. Gute Aufnahmen und Details.👍👍
this need so much passion ,time & love ,class of professional work.
Pure BS ! Who made a restoration and re-use rust rotors, sprocket and repaint the wheels leaving the balance weights just to mention couple things.
This restoration, if is is any you can call so has so many red flags.
Why did you not rinse all of the dirt from the bike before all the restoration work?
I see this video in 2x speed more satisfying and interesting to see this in 2x speed
При реставрации колесных дисков допущена ошибка, перед покраской необходимо снять балансировочные грузы, а не закрашивать их)))
Thanks for opinion
🏁🛠️🏍️Good job🏍️🛠️🏁
not perfect but very respectable job guys.
Thanks
as a collision repair technician this hurt my soul. But for the lack of tools and resources cant complain. 👍
Why so many hates on this comment section 🤣. Anyway keep the good work my brother 👊🏼
I find 2 eplanations.
1.Because there are so many people who never do anything but think they can do it better. Basically idiots, no need for further explanation on this one.
2.Some people are used to watch some other restoration channels where the guy work a lot (A LOT) better than this one. For example, I don't complain about his work, but it really bothers me so much that he didn't give the bike a proper washing before start dissasembling it... not even a quick rinse. So...
I would have removed the weights from the rims. After the refurbishment, the wheels must be rebalanced one way or another.
I've seen it all but this is the first time I've seen anyone but filler over rust. WTF
Good job ❤
Why spry over the bolts and screws? You can clearly see it doesnt get down into the threads so this is a pointless action and a waste.
Of course, I take my hat off to the author for the work done. But the chain could have simply been replaced with a new one. If the old one was stretched to some extent.
If that is a Zx10-R my name is Abraham Lincoln.
Kumlama yapsaydın daha harika bir iş ortaya çıkarabilirdin ❤ yine de çok başarılı
O.meu amigo tim liga essa moto e dele ele fais é desmonta.ela.monte.de.veis esse.vidio dele furado
antes de trabajar en la restauracion se debe lavar (first wash it). cleaner work is nicer video.
I agree!
SO SATISFYING VIDEO
20 years on Thumbnail? cmon man this model firstly announced in 2008
good
nice
Good 👍🏻 job
Thanks for watching
Get rid of WD40. Get some P.B. blaster. P.B. was specifically created as a penetration lubricant. It works better than WD.
Those wheels made in Thailand😮 35:18
Good job bro
Thank you so much 😀
Ninja 250r ?
Is there alloy weels on dt time....20 years before?
The chain is DONE! Replace it.
That’s brand new straight from factory that’s how Kawasaki bikes are made. Lol
Lakukan seperti ini pada motor ku juga bro.. aku sudah terlalu sayang dengan motorku dan tidak mau membeli penggantinya❤
You could have done well with this much work... One layer of paint everywhere.
Поверх ржавчины кладет шпаклю и красит ...😂
stopped watching... had enough of putting filler over rust and paint... you have to get the surface CLEAN first...
Why didn't u replace the new chain? It's not expensive, but make it safety in the road.
In the name of restoration he is only repainting the whole body only
Looks better than it did, but only just!! What a mess
Без пескоструя , это обман следующего владельца. Считаю это не допустимым!
Not many people have access with that. After all sandblasting is very expensive....
Play better 1.25x
What a beautiful machine …. So many memories
good job, but the gearbox must be lubrificated and everything related to roller cages and bearings should have been replaced and lubricated
Trashed ZX10 restored to the 250 it always was
Hayabusa inspiration made by ninja made by this bike 🗿
Great 👍 job at 39.25
Thanks for noticing!
Nice but what’s with the small bursts of loud music and also why is there scrapping sounds when there’s wasn’t any scraping or was fast scraping sounds when it was done slowly. Did the video editor have burst panic attack or something. It was good until a few burst of music kicked in! Then you could see the paint peeling off as the tyres were put on!
I also paint the wheels before making them dent free... And the electrical toothbrush got me really hard. Nice one also the more rusty tool bit to screw back the brake finished me off.
That was shit. 🙈 why do all that crap to the chain and not just replace it with a new one and puttin filler over rust was definitely a red flag.
The least u could have done is use a new drive chain brooo😢
Dude !??paint stripper over dirt
Put washing up liquid in your water when wet sanding, a little trick i picked up from my dad.
Its an interesting vid for me but u gotta work on the audio man. Some parts were music some were asmr and some part the audio does not tally with the video. And camera was too close to objects some time. Improve them and u would have better vid keep it up
i think 1.5x its better
I have no doubt, he is good at Restoration, just one piece of advice, please hire or practice editing video before posting it. So much time wasted on unnecessary details. Good job.
fork internal oil ?
なぜ最初に泥汚れを落とさないのか？
ride bike also at end
Why do you spent so much time showing the screws in a wheel and when it comes the motor, you speed up in 15 sec? Why???
Full Restoration ??????
This compares well with the Indians Welding truck axles back together 🙄
👌
👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Bhi ishko light bagni colour karo aacha legaga😊😊😊😊
Coloca massa por cima da ferrugem
Provavelmente com tempo vai sair toda pintura
If the bike looks like this! Did the rider need the same level of restoration?
Those 2014 zx-10r plastics dont belong on that 2012 ninja 300.
Next time make it little short
2018 model ama 20 yıldır dinleniyor 🤣🤣
You need to learn how to paint. Just watch a few youtube videos about it and you should be good. Good work !
Helo! I Also Do Restoration Of Old Rusty Machinery. I See You Do Very Well
That's great to hear!
waht happened to this bike>? did you pull it out of the ocean let it sit in a desert for a few years and then decide to restore it ?
Ninja From Flipkart 😅
Zx10r has an R4 engine, not an R2 :D
mtb,로드 2가지 이용하는데요.이건 길이 아니라 곳곳이 자전거 망가트리는 길천지 임니다;;과연 관리는 하는 걸까요?
And this kids IS NOT A KAWASAKI ZX-10
hello micheal restoration all so do pulsar restoration😅
That's the plan!
I guess there is a part 2 as this is not a full restoration.
It was all going well until the guy did rims....... After that it's crap. Not worth watching. I watched the whole video unfortunately.
Save your time.
a ZX10R fairings on a ninja 300 chassis lol
Such a clickbait video. This isnt a 10R. This isnt 20 years old. Its got 2 cylinders and you probably left it out. Smh.
Is there 10R in the Caption? I think only Ninja
😢😢😢😢😢
I chassis is rustic I would not trust it to ride again after restoration.
Kawasaki 300
Why not wash the bike first?
Paint wheels, then strip paint putting a tyre on.......
𝗥𝗲𝘀𝘁𝗮𝘂𝗿𝗮𝗱𝗮 𝗠𝗼𝘁𝗼𝗰𝗶𝗰𝗹𝗲𝘁𝗮 𝗞𝗮𝘄𝗮𝘀𝗮𝗸𝗶 𝗡𝗶𝗻𝗷𝗮 🏍😉
You don't have an air or electric sander? Eeeeeeek! I wouldn't call this a full restoration. More like a refresh or cleaned up.