Plz say how to set up binds for NBCP P5 Back Button for DualSense Controller, Back Extension Buttons DIY Kits for PS5 DualSense Controller, Programmable,Turbo, Macro, and RGB LED, Easy Connection and Upgrades
As soon as I attached the middle cable that sticks to the battery, the controller will no longer power on. If I pull that cable off, the controller powers on. I've tried 2 kits, and checked 3 different videos (including the Tomsin video) so I'm sure I'm putting it on correct, right over the 2 pegs. Am I missing something?
@@TheGamer2KnowI had the same problem and tried many times to push the ribbon cable for the right side trigger and bumper in tighter and it still didn’t work, I put back on old parts and works fine but I can’t use the backpadles
how do you turn off turbo mode, my bottom left paddle has been stuttering when I use it to build in Fortnite I haven’t tried out the top left and top right paddle yet but the bottom right paddle has been smooth when I use it as my edit button I just need to figure out how to stop the bottom left paddle from stuttering
Yeah I was going to buy this for fortnite too.. I just want to toggle sprint and switch between build mode and shooting on the back I only need like 2 of back buttons
@@sexdrugsrocknroll420 I got mines fixed like a week after I posted this, I was just dumb and accidentally put the wrong setting on when binding the paddles, they’ve been working perfect for me and help me build and edit faster and also fight better
I bought the Tomsin for my ps5 controller but I tried playing Fortnite with it but it’s not working I held down the Standard and the Turbo but it’s not working anyone got any tips
Idk if you’re still active in these comments but if you didn’t Intend to use the triggers for the back paddles would you still need to install those two side ribbons you installed last?
when i tried to remap it would just glow red and when i pressed s button and a paddle it would not start blinking so i couldnt remap the buttons. any fix?
Excuse me sir I know that you’re teaching us on how to do this, but I tried it myself and I’m not very good at it I was just wondering how much would it be to get mine done
you have to open it again. When you took out the mother board and placed that ribbon cable into those two holes. Its not making a strong connection, you have to check to make sure its aligned properly. You can do this by putting in the battery and connecting the back paddle motherboard to the strip and pushing the buttons on it to test it before closing everything. 5:56 in the video is what I'm talking about
When I assign push button L3 to the P2 button and press it with a stick, a malfunction seals to occur.Did you experience any problems? The button assigned to P4 will be input BDM-30
Better than extreme rate I’ve done two extreme rate mods on my controller and they broke on me after few days of use I think Tomsin have better build quality recommend 👍🏾
Everything is the same but the Thomson button assembly on the back is way easier to put together and not fall apart. I like my extreme rate kit but I’m used to an elite 2 back paddles and wish I went this route originally. Extreme rate has a nice rubberized back plate that I’m wonder if this would work for lol
Hello thanks for vid i already got mine and works perfect Tomsin, i did without solder and works great Anyway its fits to charger Sony DualSense charging station?
hello I have a question, so since this is for the dual sense five 2nd and first, i want to know if the backpaddles will work if i try to remap them through the ps5 manually with the paddles or do i have to have a PC for this to work because i only have a console aka the ps5 and I don't know if there's like a set button where i can jus hold it on the back and then it will allow me to bind it through there or i need some sort of software ? pls answer me back I'm willing to order today
Great video. I've installed one on an 020, but im getting no power tobthe mother board. I checked and the battery strip is firmly in. But, i didn't install the R & L replacement trigger cables. Do i need to install these tobget the power working? Thanks
Probably, my guess is that's where it gets power from since they have rumble motors. Otherwise you can solder jumper wires to the VCC and GND pads from the potentiometer pins on the analog sticks.
it sounded sweet till you mentioned there’s a turbo mode i dont get why all these back button attachments always come with mods. the tomsin one looks better cause it has 4 paddles while extreme rate has 2 paddles and 2 buttons but the tomsin ruins it with that turbo mode cheese
BDM-030 is the 3rd gen controller with a different board layout. The whole inside of the controller is build different so this kit would not be compatible with it unfortunately. Almost all the controller you buy now are 3rd if you buy brand new. So if you want an older controller to install the kit you have to buy used on eBay
Love how you show how to take the back buttons off then Fast forward through how to take the trim off. Doesn't help me at all waste of my time and cash
Currently Tomsin Kit on Sale $32.99!!
amzn.to/3KJKgPH
Hey I was wondering what the issue is with my paddles, when I go to map them, the light doesn’t blink and there is no response, please help 🙏
@@quarterc14 bad connection or ribbon cable is loose. Have to open and re check everything
@@TheGamer2Knowhow do you turn off turbo mode
My back bit came together how do I take it apart
i built my controller along with the video and not once did i stress out u have made it look so easy compared to these other youtubers
Ngl you have made something intimidating look easy
I’m deaf and I will pre order it. Thank You for help video.
I just did mine and it took 2 hours. The hardest part was putting the back piece on and making sure no wires came loose, overall it was worth it
Plz say how to set up binds for NBCP P5 Back Button for DualSense Controller, Back Extension Buttons DIY Kits for PS5 DualSense Controller, Programmable,Turbo, Macro, and RGB LED, Easy Connection and Upgrades
When I was building mine on, the small screw broke so easily so now it is stuck inside and I can't do anything it doesn't work
L1 ain’t working :(
Any ideas?
Mine L1/L2 and R1 \R2 but the X, O , △ , square didn’t work. What did i do wrong
I just realized mine is BDM 30 after doing the process
Same
Does it not work at all if it’s 030?
Same
Did you find a fix
how do you find this out!?
So it's not possible to map backpedals to some new keys other than vanilla keys? I imagine it would be beneficial for some pc games
Yes you actually have to take the controller. The process is very easy just takes time
(That controller model could be wrong, but it's similar to what I mean if not).
I have a B on my controller. Just got my system. Will this work with it?
I think you have Xbox controler
As soon as I attached the middle cable that sticks to the battery, the controller will no longer power on. If I pull that cable off, the controller powers on. I've tried 2 kits, and checked 3 different videos (including the Tomsin video) so I'm sure I'm putting it on correct, right over the 2 pegs. Am I missing something?
my kit came with pre assemebled buttons?????? there’s no parts
Mine too any new on how to reassemble them?
I’m worried about when I open it up it will cause stick drift how do I prevent this?
This was a very needed video LOL thank you
Bort mine and I had a newer version controller
all the sudden the red light stays on 24/7 and I can't map anything anymore
My R2 and R1 no longer work. Is there a way to fix this?
Prob the ribbon cable is loose
@@TheGamer2KnowI had the same problem and tried many times to push the ribbon cable for the right side trigger and bumper in tighter and it still didn’t work, I put back on old parts and works fine but I can’t use the backpadles
how do you turn off turbo mode, my bottom left paddle has been stuttering when I use it to build in Fortnite I haven’t tried out the top left and top right paddle yet but the bottom right paddle has been smooth when I use it as my edit button I just need to figure out how to stop the bottom left paddle from stuttering
Yeah I was going to buy this for fortnite too.. I just want to toggle sprint and switch between build mode and shooting on the back I only need like 2 of back buttons
@@sexdrugsrocknroll420 I got mines fixed like a week after I posted this, I was just dumb and accidentally put the wrong setting on when binding the paddles, they’ve been working perfect for me and help me build and edit faster and also fight better
First strip u put on didnt fit my controller
How do I turn off the turbo?
Just map over it with standard
It didn’t map to my buttons wha do I do?
I got bdm040 which one i put on now
My first lether piece wont fit
Can you map the buttons to the d pad or is that not possible because he only showed mapping circle X triangle and square
ya
I bought the Tomsin for my ps5 controller but I tried playing Fortnite with it but it’s not working I held down the Standard and the Turbo but it’s not working anyone got any tips
Probably the connection cables inside are wrong
can u map the turbo to r2 to shoot?
Yes
Idk if you’re still active in these comments but if you didn’t Intend to use the triggers for the back paddles would you still need to install those two side ribbons you installed last?
Am not sure but either way just do it doesn’t take much time
if mine is bdm 030 will it still work
No
bruhhh
@@TheGamer2Know
my playstation came with a bdm-030 controller so will a bdm-20 controller work on my playstation?
nope but there is a bdm 030 kit by them
can you only turbo one key or all of em?
only 1 key
when i tried to remap it would just glow red and when i pressed s button and a paddle it would not start blinking so i couldnt remap the buttons. any fix?
how do I reset my paddles?
Hey bro I ordering this, thanks to you & I hope make video or any tips for L3 & R3 touch pad specially R3&L3 remap support tekken fighter as well.
Excuse me sir I know that you’re teaching us on how to do this, but I tried it myself and I’m not very good at it I was just wondering how much would it be to get mine done
i’ll do it for your for $20
40 I need two bro
@@rickygonzaleza 40 I need two
Is this one better than the extremeRate one? If so why
I made a video comparing them both. Check it out:
th-cam.com/video/UYreZx881Ak/w-d-xo.html
Does this work on a ps5 BDM 20 without doing the L2,L1and R2,R1
yes, if you click on the amazon link in the description. You have option to buy both models the 010/020 and 030
Thanks for stealing my money
Elaborate please
The paddles are horrible tho@@Travissaur
@@aux2970 they’re fine imo. Better than Aim Controller’s paddles. They break so easily and are made of cheap 3D printed material.
Are they not good?@@aux2970
@aux2970 is it actually?
what do i do if they dont turn on? it was just working for a couple days and now i cant get the red light to flash when i press it
you have to open it again. When you took out the mother board and placed that ribbon cable into those two holes. Its not making a strong connection, you have to check to make sure its aligned properly. You can do this by putting in the battery and connecting the back paddle motherboard to the strip and pushing the buttons on it to test it before closing everything. 5:56 in the video is what I'm talking about
After opening mi controller I just realized mine is BDM-030. Do you think it’ll work if I install de BDM-020 cable?😢
No It’s only 020 and 030
@@Evisuusg 030 has ukca but smaller logo check video for more info
th-cam.com/video/NrYY1JxJt_o/w-d-xo.htmlsi=vitg7nmYpW9aZS8-
Is this conpatible with extreme rates clicky triggers?
When I assign push button L3 to the P2 button and press it with a stick, a malfunction seals to occur.Did you experience any problems? The button assigned to P4 will be input BDM-30
I spent 40 bucks just to do everything u ask and it doesn’t work and on top of that my controller is broken
X and O can worked?
No me funciona, enciende la luz y todo pero no me asocia los botones
Amazing controller
Hey will there be a version for the bdm 30 controller ?
most likely in the near future
Any news on bdm 30 version?
@@ptbuddhatheres one now
They not available Lots yet
Better than extreme rate I’ve done two extreme rate mods on my controller and they broke on me after few days of use I think Tomsin have better build quality recommend 👍🏾
Can u bind holding circle to it?
You have to map the circle with the T button instead of S button
Identical to the Extreme Rate kit.
You got to be blind
Everything is the same but the Thomson button assembly on the back is way easier to put together and not fall apart. I like my extreme rate kit but I’m used to an elite 2 back paddles and wish I went this route originally. Extreme rate has a nice rubberized back plate that I’m wonder if this would work for lol
Ok what if you have BDM 40
Hello thanks for vid i already got mine and works perfect Tomsin, i did without solder and works great
Anyway its fits to charger Sony DualSense charging station?
nope
If your only using ○ □ X etc do you need to install everthing? As i only see 1 ribbon used for those? Help??
install it all just incase u want to change but not needed
wait so all of this and it can’t even remap to D PAD
or can you?
You can
@@TheGamer2Know ok cool thx
I really think these wills be great for me. I have some arthritis in my hands and to have the R2 and L2 in the back rather up top might help
will it work with BDM 040?
This will
By Far The Easiest Back Paddle Kit Installation TOMSIN BDM 030
th-cam.com/video/lKyLA_LeVAY/w-d-xo.html
hello I have a question, so since this is for the dual sense five 2nd and first, i want to know if the backpaddles will work if i try to remap them through the ps5 manually with the paddles or do i have to have a PC for this to work because i only have a console aka the ps5 and I don't know if there's like a set button where i can jus hold it on the back and then it will allow me to bind it through there or i need some sort of software ? pls answer me back I'm willing to order today
You don’t need a pc, there’s a S and T button, S means set so you can control the bindings all on the controller
Shi is fire bro thank you
dosent have a bdm 030 kit im returning its usless
get the extremerate kit for bdm 030
@@TheGamer2Know it wasn't out yet when i bought it
Great video. I've installed one on an 020, but im getting no power tobthe mother board. I checked and the battery strip is firmly in.
But, i didn't install the R & L replacement trigger cables. Do i need to install these tobget the power working?
Thanks
Probably, my guess is that's where it gets power from since they have rumble motors. Otherwise you can solder jumper wires to the VCC and GND pads from the potentiometer pins on the analog sticks.
Do you use yours for cod only?
Any FPS
One more question. After you’ve set them to what you want can you change them in future or maybe if you messed up?
@@Iamchubbbs yea you can just override it, and re program to whatever you want
@@TheGamer2Know ok so mine just randomly stops working. Works fine then all the sudden nothing
The light shuts off and I can’t get it back on just come back randomly
Doesn’t work! Broke my controller trying to fit one of the pieces in that doesn’t even fit so thank you
This is a scam do not buy the wire that goes admiring the 2 hooks doesn’t even reach and it keeps falling off, and other wires do not fit
On not admiring
I would recommend not to stick the connector board permanently. If you need to change the battery you might damage it, when try to remove it
it sounded sweet till you mentioned there’s a turbo mode i dont get why all these back button attachments always come with mods. the tomsin one looks better cause it has 4 paddles while extreme rate has 2 paddles and 2 buttons but the tomsin ruins it with that turbo mode cheese
Turbo mode is there, but you don’t have to use it or map the buttons using turbo, just do the regular way. It’s there for those who need it
@@TheGamer2Know you’re missing the point im making players that have this will be abusing the shit out of it turning semi auto rifles into full auto
@@Addicted2BattleCall of Duty will ban them anyway. I accidentally had turbo on once and got a warning right away.
The L2 and R2 buttons weren’t working
I have the Bdm-030 why won’t it work on mine? What’s the reason?
BDM-030 is the 3rd gen controller with a different board layout. The whole inside of the controller is build different so this kit would not be compatible with it unfortunately. Almost all the controller you buy now are 3rd if you buy brand new. So if you want an older controller to install the kit you have to buy used on eBay
Bruuhhh i have a bdm 040 controller n the mapping i ordered is bdm 20 this is stupid asf
Its just glowing red
Where is the review?????
Wow. All this and my ps5 gen 2 controller is BDM 040. What the frick.
This will work for 040
th-cam.com/video/lKyLA_LeVAY/w-d-xo.html
Love how you show how to take the back buttons off then Fast forward through how to take the trim off. Doesn't help me at all waste of my time and cash
I bought it off Amazon and I got scammed!!! It only came with paddles!!!
6:07 it doesn’t fucking fit
That turbo button will get you banned on Call of Duty
I guess im forced to buy dualsense edge then
I bought 2 of these snd neither of them worked dont waste your money on this
I have bdm 30
check updated tomsin video 030 edition
Dont buy the back the hatch broke on me i spent 2 hours
My money was stolen I’m getting a assembled version 😡
This thing is literally a scam
Dont work
No chance, I will manage to break it😅😂
it don’t even work
it don’t even work 🤦🏽♂️
You can’t even hook them up to a normal controller what a fucking waste
Worst video I’ve ever watched no detail
You should be in jail
Terrible don’t buy
Bro you dont have ps5 or if you have you're bad I have played over 10 years ps3/ps4/ps5 and this was a life saver
Elaborate?
@@TheRedboy-3struck a nerve lol
it don’t even work