Linear actuator door opener
ฝัง
- เผยแพร่เมื่อ 20 ต.ค. 2024
- This was done for a ceiling cabinet with a projector many years ago.
The 3d printed brackets have yellow screws to reinforce them, the big screw holding the linear actuator goes right through the side of the cabinet with a wing nut attached, so in case of malfunction it is possible to open the cabinet by simply unscrewing the wing nut and pushing the long screw through the side and the bigger bracket.
Autodesk Inventor crash test • linear actuator project
Files: www.dropbox.co...
Testing remotes: • linear actuator with r...
I found this great. Wondering if you can do up a simple drawing of this same thing in a recliner position with a vertical to flat motion. ( 90 degrees )I am looking to build some power recliners in a more custom way rather than the stuff sold these days.
This diagram and video are almost 100% what I am looking for.
I am trying for independent back rest and foot rest. The frame would be solid wood and not springs with upholstery attached.
thanks for sharing sir ❤️🙏🏻🙏🏻
I'm interested to implement this linear actuator to my cabinet 😁
That must be on the Space Shuttle's door, yes? If not it some serious "over kill". But a GR8T job none the less :O)
hey where did you get the linear actuator from and the hinges and brackets i am doing the same type of engineering but on a mail box door
Man, he did not care.
Who wants to wait that long to open a door? I think with a door no bigger than that, I would just use good ol fashion muscle. Thank for the video
Did You tried to make is commercial product??
If yes than what problems u faced ??
As this is the best cheapest motorized option we can make
No. I used it for personal needs. The biggest problem is sound, it is just too loud. it is good for industrial use though. For home I am sure there are better solutions.
Actuator go BOOM.
¿ Ha utilizado los actuadores lineales para elevar (abrir) puertas basculantes de garaje ?
Saludos
no
Excellent solution!
I'm looking something like this for my Domotica project of "Robotic vacuum cleaner dock" in kitchen, it is possible to buy somewhere?
+MrGardenRoute both linear actuator and remote on aliexpress.com, the bracket is 3d printed.
+Igor Lutsevich Oh, I understand, I've found it. :-)
The bracket you do commercially? Or how I could make it on the the 3D printer, some model you published somewhere? Many thanks!
+Igor Lutsevich The linear actuator, please, that specific model is it?
+MrGardenRoute The linear actuator was the cheapest I could find 100mm stoke. This is the file for 3d printing www.dropbox.com/s/14rmlzq6mab8mcx/print002.stl?dl=0, but I suggest you make your own based on required dimetions.
+Igor Lutsevich Sure, between I found this www.aliexpress.com/item/Hot-Sales-IP54-12V-DC-100m-4-inches-stroke-900N-90KG-198LBS-load-6mm-sec-0/32243126379.html?s=p, do you think it would fit?
I would like to open similar doors kitchen cabinets like you have, size is 590mm x 190mm x 20mm (MDF), enough one drive ?
And the second bracket on the door, it is also a 3D printing?
How do you control it all, is that a controller, and what limit switches etc ?.
You got somewhere this project is described in more detail?
I would like to be controlled automatically, ie. switch on/off, it means open/close for Robotic vacuum cleaner dock... Thank you very much
Hi, do you know how to increase the speed of the actuator?
what is the name of those components?
What is this mechanism of motion called?
can somebody tell about the mechanism, how the motor extends the telescopic boom??
Well done
A door for ants.
How fast is this engine?
thanks very much- Particularly appreciate the quick response.
this could be useful if you have not seen it yet for finding connection points www.dropbox.com/s/2ttmur3x472kh17/la001.jpg?dl=0
I am creating a very similar box with the front of the door being flush with the wall in my screening room. The box will hold my projector, mounted in a closet behind the common wall. I want to use a 135 deg hinge so that the door falls below any portion of the light path. I will position the actuator so that the 8 inch travel drops the door to about 110 degrees.
Did you 3D print the white plastic bracket at the base of the motor? If so, would I be able to purchase one from you? If not, where did you buy it from?
You can find all you need in this folder www.dropbox.com/sh/g0bdx49dhufj0e3/AAD-l6-Njh48ROEtQMpkAUmea?dl=0
@@rush.n Thank you.
So these are in iPhones?
Hello. I'm working on a robotics project. We are debating whether to use solenoids or actuators. Regarding the above process you created: How did you calculate the actuators necessary mm needed to open the door 90 degrees?
Chris Horn I am not sure my way is the easiest one, but first with a number of tries I discovered the connection spots dl.dropboxusercontent.com/u/8686373/la.jpg (the orange circle shows the movement of connection to the door) and I also created 3d model to check for crashes and design the brackets to print th-cam.com/video/x5sbAwJE-IM/w-d-xo.html .
+Chris Horn
Hi Chris, we can provide the linear actuator for you.
Can I control it with Alexa?
via any RF bridge
I'm new to actuators - can you give some basic info? It appears that when power is first applied, the actuator goes to its full limit and stays; then another power signal is sent and it retracts. Is that right? I'm trying to come up with a device that will open a door when it get a signal from a timer, then when the other timer goes off it retracts. What I'm afraid of is that when the power goes off from the first timer, it automatically retracts.
Falcon Kits When you apply power it retracts and stays there (there are end switched on both ends), you can turn off or keep the power, then all you need is to switch plus and minus and it retracts. I used simple remote to do it th-cam.com/video/z2dKrFoRznA/w-d-xo.html but also relays would work.
Why is it so loud?
You could use a faster acctuater for this
Igor- I forgot to ask. Are those soft close 135 deg hinges? I would think I cannot get away with the soft close as the actuator will pull the hinge closed even if resisted. thanks in advance!
it does not matter what hinges, the actuator will control the speed.
really good！
How do you control the open and close ?
th-cam.com/video/z2dKrFoRznA/w-d-xo.html
Hi, please what is the name of the mounting brackets and where i can buy them? thanks
Please read the comments, the brackets are 3d printed. The 3d print file is attached.
What will happen if the motor in the linear actuator gets stuck up or broken?
This will necessitate breaking the door and cupboard.
I did answer this question twice in the comments below. The large screw can be released from the outside and the door can be opened.
Hi there! Interested in your design! (Door opener with actuator). Struggling to do the drawing to calculate the actuator stroke...Can you share your design please? Thanks
sure www.dropbox.com/s/vlw78ya83tczhrv/la.jpg?dl=0 (the orange circle shows the movement of connection to the door), inventor model th-cam.com/video/x5sbAwJE-IM/w-d-xo.html
What is the stroke needed for a 90 degree pivot?
The closer you put it to the hinges the shorter the stroke.
Love it! This is exactly what I need, you don't happen to have the STL or SCAD files handy so I can print the brackets?
look in one of the comments to this video th-cam.com/video/x5sbAwJE-IM/w-d-xo.html
10 years and 100db later, the door opens
Igor - Thanks for sharing ,
I have exactly same plane for opening small door for projector ,
Q - How can i trigger for open closing the actuator by RF?
Scenario :
I have some RF box which connected to the projector(220V) ,
When i press on Projector On/Off button it sends RF signal to the projector screen for opening / closing it
So i need somehow component that be connected to the actuators and will get the RF signals from the box and it open/close the door.
Can some1 help?
I did not want any automation on that door to avoid a situation when your projector is on with the door closed.
Avi Cohen - I am thinking about doing the same thing for my projector housing too. Great minds think alike. LOL..
Igor Lutsevich - If one have a projector in an enclosure it should ,or most likely have fans for venting whenever the projector is on anyway. So I would not worry about that too much. If one does not have fans to vent their projector, then they have bigger problems to worry about.
What is the stroke length on this actuator? Thinking about doing a similar project
100mm or 4 inch, I was limited by the internal shelf, otherwise it should be easier with a longer stroke.
Price kya hai iska
how do you control it when it goes out and in?
here th-cam.com/video/z2dKrFoRznA/w-d-xo.html
Where did you get the plastic piece that connects the actuator to the door?..Can you send a link?
www.aliexpress.com/item/4000768947373.html?spm=2114.12010615.8148356.13.ce6f647daqo3XM
Lokasi mana om
Can you send a link to get the plastic piece that connects the actuator to the door?.
Прикольно.. где можно приобрести белые пластмаски или как они называются?
они напечатаны, есть 3д файлы где то в комментариях.
@@rush.n а актуатор какой длины? 10 см где-то?
@@MM-kz9pd да, ход 100мм.
@@rush.n а как подключается он к питанию? Он 12 вольт, адаптер нужен?
how many mm/s ?
Depends on your actuator.
Unfortunately, it's too big.
Awesome
hi Igor. What length actuator is that? Thanks in advance. Matt
Sorry- I see that you have already provided that information to another poster. thanks
But that noise!... Otherwise cool
what is the Linear actuator specification please?!
100mm Linear Actuator DC 12V 100kg max
Wail Al-julandani 100mm
Cool
Izin nyimak mas Bro..🙏
Now try to open that with a powerloss ;)
I have done that a number of times! The big screw goes all the way through square 3d printed bracket to the other side of the cabinet wall with a wing nut for fast releasing.
Офигенно!!!
Problem came when you whant to open it by hand or when for some reason there is no power.
The large screw going trough the 3d printed bracket is also going trough the cabinet wall, so if something like that happen you just unscrew it on the outside and push that screw. If you use some other kind of bracket I guess you can use screws holding the bracket.
magnetically attach actuator to door maybe
Travis Mashburn that’s a genius idea 👏👍
Get a gravity return actuator. Where it only pushes out and the shaft isn't tied to the mechanism. You would be able to pull it open.
👍👍👍
Noisy!
Way too slow
Just wanted to share the hatch I made for my new Epson 5040- Couldn't have done it without Igor's idea and assistance!
Here is the link to the video! th-cam.com/video/UTlTGEZDHAU/w-d-xo.html
looks good! nicely done.
Too Slow, and too Loud.
И?
Where did you get the plastic piece that connects the actuator to the door?..Can you send a link?
I'm also very interested to see how the actuator shaft is connected to the door
Can you send a link to get the plastic piece that connects the actuator to the door?.
stl file for 3d printing is in comments to my other video th-cam.com/video/x5sbAwJE-IM/w-d-xo.html