Chisel ruined, burnt drill, planing machine dangerous manure, milling cutter without protection, he will soon run out of fingers. So stay away from this nonsense !!
With all the tutorials on TH-cam about wood chisel sharpening and care he has crashed all of that,i would hate to think of what his finishes look like.
Depends on if he cares!! LOL! I have every day chisels and a kit that I keep separate for fine work. Same with drill bits cause I also work steel and need good quality sharp ones to minimize fabrication time. And with one sided comments like yours, I bet his finishes with a shitty chisel are far better than yours with accurately sharpened ones.
Thanks, I enjoyed and liked your video! At the end of your video, you are doing climb cuts (feeding in the wrong direction)... Very unsafe practice with a router under any circumstances!
Climb cut itself is not that dangerous, with shallow passes. But that method at the end is just wrong way to do climb cut. Too much material taken at one pass for that blade (bit diameter) climb cut with too much material taken, gloves with spinning blade and that close too.
Wearing gloves with rotating tools is not a good idea. Without it, you only lose a piece of your finger if it touches the moving blades. With them, you could lose the entire hand. Think about it.
3 minus fingers and 5 in gloves it is dangerous to work with an open and cutting blade. The more gloves are even bigger. Safety at above all! And the rest of the tools are good ideas👍
Can someone forbid these kind of videos. It is dangerous to show to beginners who can't estimate that these great inventions are made by a beginner who knows nothing about woodworking and doesn't obviously care for safety at all.
Your chisel looked like someone axed a concrete floor with them. If you sharpen them like that they will still be crap when finished. The one with the planer....I hardly know what to say! Folks, DO NOT IN ANY WAY try that stunt unless you want to lose some fingers very quick! Your fingers will be trapped so quick you won't realize it before it's too late, let alone a kickback occurs and shoots the material around the room.
@@arionjay5823 Look at the tools he use and buy what you need. The "tools" he make is dangerous, do not spend time on that if you want to keep your fingers.
People saying what's dangerous and loosing finger. Not a good idea to wear gloves with rotary tools. Well safety is number one so is taking precautions is step on of safety. Know where you hands are. Knowledge of direction of tool operations if there is a material catch and shot out. My mind is on those things and ready. If anything happens that's a scare I taking a break.
🤣🤣🤣 Ой, мля!... 2:24 - Сразу видно "мастера"! Автор! А чего ты мелочишься? Затачивай стамески рашпилем. Так у тебя получится быстрее загубить инструмент. Круги какие-то вырезать, наждачку клеить... Нафига? Зажал стамеску в тиски и рашпилем её! Рашпилем!... Рашпиль желательно держать перпендикулярно к оси стамески. Так разультат можно достигнуть одним движением. Чего время-то терять? 🤣 ...Руки бы оборвать за порчу инструмента!
Most of those hacks are useless! For example what was the need for that bearing to be fixed in that piece of wood, if all you ever wanted to achieve was the rotation as per the Rpm of the drill?? Similarly why do many ball rotation wheelies when five or six would've done the trick!?
i watched so you dont have to: 1. how to make a sharpener that anneals your cutting edges 2. how to make a lot of dust for no apparent reason 3. seriously? 4. a saw guide you have already seen a zillion times on youtube 5. trim router jig that doesnt work any better than holding the router in your hand change channel name to 'junkyard of ideas'
"Amazing Woodworking" What the f ***! All this is a piece of crap, it should be removed from youtube so people don't get hurt. I had to buy a whole box of hands, double facepalm was not enough.
creativity is my soul, nothing can get in the way, it's all useless 😀
😱😱😱😱😱😱 Viele Grüße aus Germany
Good ideas excellent
Thanks a lot
Fingers got scary close to the planer blades! Yikes! 🔧🔧🔧
Beautiful video
Please let me know which is the best drill press?
I want to buy so please advise me which one shall I buy?
I am in UK.
Thanks bro, i got idea from this video,,BRAVO
I love your creativity and resourcefulness but some of these ideas are very very dangerous.
Sería importante indicar el tamaño de rodamientos y tornillos qué se usan. Gracias.
1 video hay 👍!Tôi thích nhất #3 & #4 rất hữu dụng!
May i respectfully suggest that when you drill all the way thru wood to drill halfway and then flip it over to finish the hole. No tearout......
2 words - backer board
Yeah, a backerboard is infinitely easier than somehow measuring out the exact position of a hole on the opposite side.
No need to measure if using small pilot drill first.
Easy method,your very briliyant.
Поражаюсь англоязычным ютуберам. Прав был Задорнов...Наши самоделкины чудачат,а эти вообще с ледникового периода не вылезли до сих пор...
Muito boas 💡 parabéns nota 10 ☝👍👍👍😄 continui ajudando as pessoas com suas ideias valeu.
Chisel ruined, burnt drill, planing machine dangerous manure, milling cutter without protection, he will soon run out of fingers. So stay away from this nonsense !!
SUPER !
Thank you
4th is fantastic
With all the tutorials on TH-cam about wood chisel sharpening and care he has crashed all of that,i would hate to think of what his finishes look like.
Depends on if he cares!! LOL! I have every day chisels and a kit that I keep separate for fine work. Same with drill bits cause I also work steel and need good quality sharp ones to minimize fabrication time. And with one sided comments like yours, I bet his finishes with a shitty chisel are far better than yours with accurately sharpened ones.
Интересная у вас фанера. ))
Thanks, I enjoyed and liked your video! At the end of your video, you are doing climb cuts (feeding in the wrong direction)... Very unsafe practice with a router under any circumstances!
Climb cut itself is not that dangerous, with shallow passes. But that method at the end is just wrong way to do climb cut. Too much material taken at one pass for that blade (bit diameter) climb cut with too much material taken, gloves with spinning blade and that close too.
Super Idea bro
Thank you so much
Wearing gloves with rotating tools is not a good idea.
Without it, you only lose a piece of your finger if it touches the moving blades.
With them, you could lose the entire hand.
Think about it.
Yeah, still some manuals even suggest using gloves. Like really?
a brilliant idea
Your tips and tricks makes easy to understand about machine 😆😁😄
Thank You..
When you loose a finger or two!
3 minus fingers and 5 in gloves it is dangerous to work with an open and cutting blade. The more gloves are even bigger. Safety at above all!
And the rest of the tools are good ideas👍
Чудово!
Дуже дякую
Can someone forbid these kind of videos. It is dangerous to show to beginners who can't estimate that these great inventions are made by a beginner who knows nothing about woodworking and doesn't obviously care for safety at all.
You can’t get the correct included angle on a twist drill sharpening it like that!
As expected... Videos with most amazing ideas👍👍👍👍👍
Thank you so much 😀
My channel subscribe kar lo please
Stop it
this is awesome man
Thank You
U make very Dangerous jiggs.
Your chisel looked like someone axed a concrete floor with them. If you sharpen them like that they will still be crap when finished.
The one with the planer....I hardly know what to say! Folks, DO NOT IN ANY WAY try that stunt unless you want to lose some fingers very quick!
Your fingers will be trapped so quick you won't realize it before it's too late, let alone a kickback occurs and shoots the material around the room.
That planer trick is just disaster waiting to happen
@@attepitkanen7358 Yes! Exactly..!
What was the point of number 4?
Bro i want ti buy all this tools ,where can i find them?
Thank you Sir
@@Junkyard250 so will u tell me?
@@arionjay5823 Look at the tools he use and buy what you need.
The "tools" he make is dangerous, do not spend time on that if you want to keep your fingers.
If you are reading this PLEASE DEAR GOD DONT MAKE ANYTHING YOU SEE IN THIS VIDEO!!!!!!!
It was helpful 👍
is there an adjustment in tool 5?
People saying what's dangerous and loosing finger. Not a good idea to wear gloves with rotary tools. Well safety is number one so is taking precautions is step on of safety. Know where you hands are. Knowledge of direction of tool operations if there is a material catch and shot out. My mind is on those things and ready. If anything happens that's a scare I taking a break.
🤣🤣🤣 Ой, мля!...
2:24 - Сразу видно "мастера"! Автор! А чего ты мелочишься? Затачивай стамески рашпилем. Так у тебя получится быстрее загубить инструмент. Круги какие-то вырезать, наждачку клеить... Нафига? Зажал стамеску в тиски и рашпилем её! Рашпилем!... Рашпиль желательно держать перпендикулярно к оси стамески. Так разультат можно достигнуть одним движением. Чего время-то терять? 🤣
...Руки бы оборвать за порчу инструмента!
Super very super
Thank you very much
I gave up at 300th screw methodically screwed .
I looks like t's all about screwing🎉
Thank you for your comment
mũi đục mà mài kiểu này thì thua rồi
Good job bro
Thank you so much 😀
Never gloves while working with rotating tools
AND YET DOESN'T KNOW THE CORRECT WAY TO USE A SPANNER 🤨
Зачем выдумывать станину для фрезера если фреза копировальная? В руке держать проще и фреза гореть не будет
Смеюсь, кто ж так стамески точит, я угораю
Thanks.
Welcome!
Move the damn sander
These are the things you don't do! Scary.
👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍
Have you been on the beer, your off your head........
👍👍👍🖐️✌️🇰🇿
Most of those hacks are useless! For example what was the need for that bearing to be fixed in that piece of wood, if all you ever wanted to achieve was the rotation as per the Rpm of the drill??
Similarly why do many ball rotation wheelies when five or six would've done the trick!?
the one with all the ball wheels looks like training wheels for someone that cant use a sander or grinder
A little audio would really help.
Dangerous
i watched so you dont have to:
1. how to make a sharpener that anneals your cutting edges
2. how to make a lot of dust for no apparent reason
3. seriously?
4. a saw guide you have already seen a zillion times on youtube
5. trim router jig that doesnt work any better than holding the router in your hand
change channel name to 'junkyard of ideas'
Stupid , far from accurate and downright dangerous, step away from the tools !
Damn right
I recommend you this product I bought it and it is very nice amzn.to/2WXO9Xd
Remove him from TH-cam before someone gets seriously hurt!
Dangerous amateurism with cheap wood from banana boxes.
Woodglut is nice for that.
Useless tools.
Damn right
Non credo che siano molto funzionali queste cose.
9
Specific tips for specific tools, how many people will use this?
"Amazing Woodworking" What the f ***!
All this is a piece of crap, it should be removed from youtube so people don't get hurt.
I had to buy a whole box of hands, double facepalm was not enough.
My face hurts from face-palm and fingers flew off with blood everywhere!
Полная хрень!
.
This is all dangerous useless nonsense
Nvm lnao