Hello! Can you make a video showing how to use a QU mixer in combination with an RTA mic to measure audio frequencies? I'm really looking forward to that video
@@Licht_en_geluid_meander Personally I like TP-Link routers and minimum I work use would be a 1500 model. eg. AX1500. if budget allows step up to an AX3000
@@Frank-Ros There is no setting to change, you can only connect two tablets. You can connect up to 8 phones for monitor control but only 2 tablets for full control
Hello.. so I connect my sq-6 to router also my phone it’s connect to the same internet but when I open the app I doesn’t show the sq-6 on the app I try to put the IP address and nothing.. can u help me here ?
@ yeah o try a network cable.. one that is working I plug to my router and my SQ-6 and morning happens no Lights on the cable Port nothing, when i try on my computer it works so i dont if is a configuration on SQ-6, also i dont see settings on SQ app
There are quite a few options when running a subwoofer. Best option is to use a processor like a DriveRack that will send the correct signal to the correct speakers. Without a driverack you need to get creative. Subs could be run from a dedicated Aux... set to postfader so it follows LR levels and changes plus a hard LPF on the EQ to limit signal freq to 100mhx or less depending on your subs.
Thanks again Rob. 🙂
Hello! Can you make a video showing how to use a QU mixer in combination with an RTA mic to measure audio frequencies? I'm really looking forward to that video
What do you think is the cheapest router for operating the ipad on about 30 meters away and with minimal delay?
@@Licht_en_geluid_meander Personally I like TP-Link routers and minimum I work use would be a 1500 model. eg. AX1500. if budget allows step up to an AX3000
@@soundadvicewithrob3083thanks!!
Hoi Rob when I connect my tablets to my Q16 I can only connect 2 tablets
is there perhaps a setting in the Q16 to use multiple tablets?
@@Frank-Ros There is no setting to change, you can only connect two tablets. You can connect up to 8 phones for monitor control but only 2 tablets for full control
thank's
Hello Mr rob just a question how long you been using Allen & heath mixer
@@BetoiNazaire My first AH mixer was the analog MixWiz many years ago LOL. Been a fan ever since!
@ I’m new to Allen and heath I got a SQ5 I got the basic set up and I need more help on it can you give me some tutorial
Do you do personal tutorial for SQ5 Allen n heath
@@BetoiNazaire Sorry no
Hello Bro, please how to connect two tablets on SQ7?
@@kouadiokevinkouassi6221 Connecting a second tablet is as simple as connecting it to the wifi router and then launch the SQ software
Hello.. so I connect my sq-6 to router also my phone it’s connect to the same internet but when I open the app I doesn’t show the sq-6 on the app I try to put the IP address and nothing.. can u help me here ?
@@mikaeloliveira9772 Check Settings . SQ app . Local Network (must be enabled)
@ yeah o try a network cable.. one that is working I plug to my router and my SQ-6 and morning happens no Lights on the cable Port nothing, when i try on my computer it works so i dont if is a configuration on SQ-6, also i dont see settings on SQ app
@@mikaeloliveira9772 Are you sure the network cable is plugged into the "Network" port on the SQ6 and not the dsnake port (its the same connector)
@ yes it is.. there’s only 1 network port
@@mikaeloliveira9772 Ok let go the other direction... is the cable connected to a LAN port on the router and not to the WAN(Internet) port
can some one here pls help me. Where do i plug my subwoofer in
If i plug into the mix how do i bring the LR out to mix ?
There are quite a few options when running a subwoofer. Best option is to use a processor like a DriveRack that will send the correct signal to the correct speakers. Without a driverack you need to get creative. Subs could be run from a dedicated Aux... set to postfader so it follows LR levels and changes plus a hard LPF on the EQ to limit signal freq to 100mhx or less depending on your subs.