Hello, I'm having a problem with configration and programming of modbus in SoMachine. My project contains HMISCU8B5 (HMI with PLC) and I've added 'Modbus Manager' for COM1 The other device will be connected to this port and I would like to read data from it. Let's say it will have address 1. As far as I know I should use ADDM and READ_VAR function blocks. How should I configure them to read temperature from device. Temperature addres is 40002. How should I set those blocks to continuously read value? Any help will be appriciated. Thanks
Video is very helpful
Hello Sir how do you find the VFD data table in delta VFD8192 please Explain Thanks
How you decide 8193 modbus register,I can not find delta manual kindly explain it sir
Hello,
I'm having a problem with configration and programming of modbus in SoMachine.
My project contains HMISCU8B5 (HMI with PLC) and I've added 'Modbus Manager' for COM1 The other device will be connected to this port and I would like to read data from it. Let's say it will have address 1.
As far as I know I should use ADDM and READ_VAR function blocks. How should I configure them to read temperature from device. Temperature addres is 40002. How should I set those blocks to continuously read value?
Any help will be appriciated. Thanks
How if combine on off with proximity and inverter ATV 12
please i am confused here as a beginner , how come you write the DONE which is the output to Q0.0 and Q0.1 whilst communicating through serial line?
what's the cable connection from plc to the inverter?
please show...how to assignee 8192/8193 from delta inverter manual?
2001H = 8193
Voice is not proper