You probably know that, but your "free energy AC generator" is called synchronous generator. But I understand,"free energy" are a magic words on TH-cam :)
You should explain better where you get the parts and why you’re using them. Your videos are interesting but you can’t assume we all in as much as you do ❤
Now you can couple this in a magnet motor synchronously to your generator. You can put heavy duty capacitor to store enrgy. Be noted of the frequency should be synchronously in gearing by mechanical.
Thanks for posting such an informative video I was converting my old alternator to PMA. I was under the impression the more number of teeth I have the more power full generator can get for this reason I replace 12 alternator teeth with 24 permanent magnets 1st I tried with 12 N, S pole magnet I was able to get a car indicator light bulb lit up on a high RPM but as soon as I add 12 more magnets I was expecting more AC current generated from low RPM as you are getting but I didn't, I didn't know what has gone wrong I was thinking I might have damaged internal wiring of Alternator but from your written description today I understand the number of magnets has to be equal to the number of coils The magnet I was using they are N50 13kg pull as you can imagine the nightmare I have gone through to keep all 24 of them next to each other all 24 are glued and buried in epoxy I don't think I can get them out without any damage but I like the magnet and the ideal you are using can you please post a link to where you bought your magnets from and what type and pull force they are Thanks
Glue it with super bonder or similar then add durepoxi to fill the gaps, it’s easy to take it out later until you find the right position for the magnets
I am rather upset. I want to be impressed for a change. I want to see a generator feeding a heavier load, like a real incandescent bulb, not just a wimpy low-wattage LED bulb.
Hi. Anytime you are making a PMA you have to make sure you arent over saturating the core material. When they make BLDC motors they calculate it usually just below saturation so the flux is able to leave the core (usually at a given rpm range) when over saturated you wont get the same output. He does a neat build. Ive 3d printed rotors that have slots just for the magnets to slide into while not having to worry about securing it. 3d printer rotor also is easy to turn down later for more roundness once you get it the right size to be able to press onto a shaft. In my case, was a 1/2 D shaft.
You are really a smart person, I think you can come to work in our company, our company needs talents like you hahahahaha, it just happens that our company is a company that produces motors.😄😄😄😄
GeneReddington ....Well This project gets thumbs up , let me add a comment ,Please check the windings are made of copper wire and not alloy like used in lots of motors today .Even squirrel cage motors like the one in the video come with alloy windings . China wind motors with alloy wire colored like copper but uses two inches of copper wire joined to each end of each coil . What you will find is that sticking magnets in want get a bean out of them , Some motors will gen to some degree before being modified , But alloy windings don't work with permanent magnets . So while hunting for motors for experiments think alloy and steer clear . Best take a small file rat tail type and just take a bit of insulation of the actual winding to make sure its copper colour and not alloy .... silvery grey . So this guy has got it right so thumbs up not like the dam fakers all over youtube ?
The video is awesome. One little query however, the title. I would suggest not calling it "Free Energy" as some people my get the wrong idea but other than that everything is great.
Can you try with a electrometer? Connect a drilling machine on the shaft of the rotor and make it spin on different velocities reaching different RPMs And che different readings: voltages? Amperes? Hz? Thanks buddie! You are amazing!
I like some details in the comments most leave out. Like same number of magnets as coils. How many volts and amps can you get when turning at a reasonable speed?
I love these generator videos on TH-cam. Unfortunately, the load in 99.9% of these videos is an LED bulb. I want to see a video with a real INCANDESCENT bulb as the load! They draw a lot more juice than an LED, so I want to see a REAL filament bulb as the load!
i am surprised you do not try putting power to a coil around the rotor.. it should then cause it to become an electromagnet technically right? then spin it
@@DanielsInventions you have created quite a few overunity devices in past such as bifilar coil, overunity motor generator etc, so i believe you have full expertise for replicating Thane hiens overunity transformer as well. I am biggest fan of your channel, please give it a try. Your channel is a hope for humanity using right technology.
really you know that the answer is in simplest form get an analog compass (not smart phone app ) put your magnet near the compass not to close u don't want to damage the compass flip the magnet when needle north deflects to the magnet the side facing the needle is the north
I hope you're not paying Pattent lawyers. It's a scam. You can probably figure out how to make free electricity before you figure out why lawyers are telling you how things work.
It's not free. It's just another generator! If you want to crank it yourself then you need to buy food and water to power your body. If you can do that for free then you have just solved world hunger and I expect your Nobel will be in the post.
Ali ako dodas pretvarac elektricne energije u mehanicku i spojis ga da napaja generator dobijes overunity, jedan drugog napajaju i jos imas energije za napajat druge uređaje.
@@anteskojo5959 Da tako može ne bi se gradile centrale, kakvo je to neznanje, samo na yu tubu može motor da pogoni generator koji napaja taj motor, u stvarnosti je to nemoguće po svim zakonima.
Why make videos without explanation 😭? This is tiring. Why not out text if you don't wanna talk. Firstly what is that white thing that popped up. I was happy now am sad. Will just keep looking. Otherwise wishing you all the best. Hopefully you will think about us next tym..
Hello Everything is unclear. You have viewers and you have no shared information for viewers. You are united and do not talk in detail about what materials and products are used in these activities. Please do not write down all the details when copying new videos
That is because you haven't studied physics basic how AC can produce. He just change the iron rotor squirrel cage into a magnet rotor so when rotor spins those magnet create a magnetic field changing N/S pole so it can produce AC on stator coil
Nice work Daniel! Add a bridge rectifier and a voltage dump load triggered at ~13.8V, and you can charge your deep cycle batteries as you mention above. Wind, Hydro or hook up to bicycle and you have great emergency power. Thank you for the video, I like the way that you designed and made the new rotor! 👍
I have done a similar one but I don’t know how much power i can get out of it? I was expecting to see you measuring yours to see if you can get more power than what the rotor was originally? By the way you’ve done a great job 👏 👏👏👍
You probably know that, but your "free energy AC generator" is called synchronous generator. But I understand,"free energy" are a magic words on TH-cam :)
Gostei da vossa apresentaçao.
But is it free energy or not????
@@patricialaura2234 No its not. It regular AC generator.
🌚🌝
It's free for the simple fact that you don't have to pay anyone for power. Kids these days are getting slower and slower
You should explain better where you get the parts and why you’re using them. Your videos are interesting but you can’t assume we all in as much as you do ❤
Now you can couple this in a magnet motor synchronously to your generator. You can put heavy duty capacitor to store enrgy. Be noted of the frequency should be synchronously in gearing by mechanical.
Thanks for posting such an informative video I was converting my old alternator to PMA. I was under the impression the more number of teeth I have the more power full generator can get for this reason I replace 12 alternator teeth with 24 permanent magnets 1st I tried with 12 N, S pole magnet I was able to get a car indicator light bulb lit up on a high RPM but as soon as I add 12 more magnets I was expecting more AC current generated from low RPM as you are getting but I didn't, I didn't know what has gone wrong I was thinking I might have damaged internal wiring of Alternator but from your written description today I understand the number of magnets has to be equal to the number of coils
The magnet I was using they are N50 13kg pull as you can imagine the nightmare I have gone through to keep all 24 of them next to each other all 24 are glued and buried in epoxy I don't think I can get them out without any damage
but I like the magnet and the ideal you are using can you please post a link to where you bought your magnets from and what type and pull force they are
Thanks
You can check out this website: www.magnet4less.com/home. It will give you specific dimensions on everything. You can find all the information there.
@@DanielsInventions Thanks
Glue it with super bonder or similar then add durepoxi to fill the gaps, it’s easy to take it out later until you find the right position for the magnets
I am rather upset. I want to be impressed for a change. I want to see a generator feeding a heavier load, like a real incandescent bulb, not just a wimpy low-wattage LED bulb.
Hi.
Anytime you are making a PMA you have to make sure you arent over saturating the core material.
When they make BLDC motors they calculate it usually just below saturation so the flux is able to leave the core (usually at a given rpm range) when over saturated you wont get the same output.
He does a neat build. Ive 3d printed rotors that have slots just for the magnets to slide into while not having to worry about securing it. 3d printer rotor also is easy to turn down later for more roundness once you get it the right size to be able to press onto a shaft. In my case, was a 1/2 D shaft.
You are really a smart person, I think you can come to work in our company, our company needs talents like you hahahahaha, it just happens that our company is a company that produces motors.😄😄😄😄
GeneReddington ....Well This project gets thumbs up , let me add a comment ,Please check the windings are made of copper wire and not alloy like used in lots of motors today .Even squirrel cage motors like the one in the video come with alloy windings . China wind motors with alloy wire colored like copper but uses two inches of copper wire joined to each end of each coil . What you will find is that sticking magnets in want get a bean out of them , Some motors will gen to some degree before being modified , But alloy windings don't work with permanent magnets . So while hunting for motors for experiments think alloy and steer clear . Best take a small file rat tail type and just take a bit of insulation of the actual winding to make sure its copper colour and not alloy .... silvery grey . So this guy has got it right so thumbs up not like the dam fakers all over youtube ?
Great Invention, I Like Because GOD With You and Your Family Haleluyah.
The video is awesome. One little query however, the title. I would suggest not calling it "Free Energy" as some people my get the wrong idea but other than that everything is great.
Its click baitish
The boy mechanic. A book from the 50's. Had alot of cool projects.
this is cool,,it's detailed and interesting to see..
Can you try with a electrometer?
Connect a drilling machine on the shaft of the rotor and make it spin on different velocities reaching different RPMs
And che different readings: voltages? Amperes? Hz?
Thanks buddie! You are amazing!
Very good work
Hello VN OK rất tuyệt vời chúc bạn thành công hay ok
Gostei muito da sua postagem muinto hobregodo
That's the most interesting beyblade I've ever seen
Good morning Sir
I love you this work
That would be awesome to power lamps and coffee makers but I don't know about all that
I like some details in the comments most leave out. Like same number of magnets as coils. How many volts and amps can you get when turning at a reasonable speed?
Thanks good job👍👍👍🇲🇨
What if I leave the core and I just make scratches for the magnets
Good evening, what kind of white material is that that you are using? I am born and I do not know the name of it thank you in advance
Teflon
I love these generator videos on TH-cam. Unfortunately, the load in 99.9% of these videos is an LED bulb.
I want to see a video with a real INCANDESCENT bulb as the load! They draw a lot more juice than an LED, so I want to see a REAL filament bulb as the load!
i am surprised you do not try putting power to a coil around the rotor.. it should then cause it to become an electromagnet technically right? then spin it
How much rpm does it Need For Maximum Output and how much is the Output?
Nice build.
Please replicate Thane heins bitoroid overunity transformer.
I want to know if that actually work or it is fake.
We have never built one of those and we are not sure if it will work on our first attempt.
@@DanielsInventions you have created quite a few overunity devices in past such as bifilar coil, overunity motor generator etc, so i believe you have full expertise for replicating Thane hiens overunity transformer as well.
I am biggest fan of your channel, please give it a try. Your channel is a hope for humanity using right technology.
You will see that the bytyroid transformer has to have its own separate ground rod grounding the transformer by it s self.
Byfiler trans for also needs its own grounding rod
Dacà este adevarat vreau si eu unu preparat
Bro do you get this neodymium magnet.
nice
What type of plastic was that that you cut out that white plastic that you used to screw the neodymium magnets to?
This material is called Teflon.
@@farrukhhasan7751 okay thank you. Do you know if I can purchase Teflon at a hardware store? Or do I have to purchase it directly from a company?
@@WiKiTWoNKa there are special stores which deals in this kind of material and other materials too here in Pakistan.
These are not plastic these are acrylic sheets which are costly
How do you figure out the N & S poles of the magnets ?
really you know that the answer is in simplest form
get an analog compass (not smart phone app )
put your magnet near the compass not to close u don't want to damage the compass
flip the magnet when needle north deflects to the magnet the side facing the needle is the north
Bonjour pouvez vous mettre les références moteur je suis en corse merci
Stick it to a mounted bike build a battery pack and boom your can recharge them while exercising
Great to obtain compleat afishensy must be balanced and by using a mill machune would do so
Think EEE-fficiency
por quanto fica um gerado deste?
High five again
I laugh so hard when i see "free energy device" in youtube videos.
what is the dimensions for the magnets used ?
The dimensions are posted at 2:39.
I hope you're not paying Pattent lawyers. It's a scam. You can probably figure out how to make free electricity before you figure out why lawyers are telling you how things work.
Boa tarde Amigão.
Elem de ficar Muito bem feito ficou perfeito que me vender?
It needs a engine to generate power requirements like gas and generator engine
Yes but with this you can convert some type of energy to electricity. Still useful.
a steam machine , a water wheel, wind mill, magnetic motor, etc all of them are usable ;)
Ya intersting
Baek ke paeya me yh setkar lagakar bano
Where are You Now.
Everyone dies understand how balancing the moror s rotor is so important
I ment everyone does understand thus is being changed by youtube as I speak
That edit everything on yourube
♥️♥️♥️♥️❤❤❤❤
I was looking for this for few days..
A stupid Guy has build this .. but With Magnet in a Jar and call it: auto-shaker 😅 lol
Where do i get to these parts to purchase some
It's not free. It's just another generator! If you want to crank it yourself then you need to buy food and water to power your body. If you can do that for free then you have just solved world hunger and I expect your Nobel will be in the post.
It doesn't work
Nema tu slobodne energije, ulaže se mehanička a dobija električna, to je samo pretvarač energije.
Ali ako dodas pretvarac elektricne energije u mehanicku i spojis ga da napaja generator dobijes overunity, jedan drugog napajaju i jos imas energije za napajat druge uređaje.
@@anteskojo5959 Da tako može ne bi se gradile centrale, kakvo je to neznanje, samo na yu tubu može motor da pogoni generator koji napaja taj motor, u stvarnosti je to nemoguće po svim zakonima.
un gingo tallao
Why make videos without explanation 😭? This is tiring. Why not out text if you don't wanna talk. Firstly what is that white thing that popped up. I was happy now am sad. Will just keep looking. Otherwise wishing you all the best. Hopefully you will think about us next tym..
or you can just buy one
Steam powered generator
Save your money, just go buy a truck alternator....
Take a physics class and pass the test. Quit wasting your time and mine.
Hello Everything is unclear. You have viewers and you have no shared information for viewers. You are united and do not talk in detail about what materials and products are used in these activities. Please do not write down all the details when copying new videos
That is because you haven't studied physics basic how AC can produce. He just change the iron rotor squirrel cage into a magnet rotor so when rotor spins those magnet create a magnetic field changing N/S pole so it can produce AC on stator coil
Aapka yah product mujhe chahie aap apna mobile number yah mera mobile number
Nice work Daniel! Add a bridge rectifier and a voltage dump load triggered at ~13.8V, and you can charge your deep cycle batteries as you mention above. Wind, Hydro or hook up to bicycle and you have great emergency power.
Thank you for the video, I like the way that you designed and made the new rotor!
👍
It only produce energy when spin it manually.
I have done a similar one but I don’t know how much power i can get out of it? I was expecting to see you measuring yours to see if you can get more power than what the rotor was originally? By the way you’ve done a great job 👏 👏👏👍
Saludos me podría decir la dimensiones de los imanes, le agradezco
@@josemanuelcisneros6968 3/4"X 1.5" X 3/16"
THIS IS ONLY FOR GAME.