Glad your Okay,man that could of been much worse, you got our prayer for full recovery! Your doing a GREAT JOB I enjoyed seeing the update!! Get healed up, keep up the good work and have fun at FLYWHEEL!!!!
for the hydrostatic control you could use what is referred to as a push pull cable those are specifically designed for those stresses and can be ordered in many different securements
Love the build. I believe about the headphones I've been seeing a whole lot of trouble with these little Bluetooth dongles for Bluetooth devices mice, keyboards, headphones, printers causing a crap load of problems even as far as not letting machines boot up.
james been missing your project! Hope your all healed up and feeling like a spring chicken! I am not trying to rush your project,it is a very interesting build and i am just curious! I know your a busy man and just wanted to give you some encouragement and say keep up the great work,and I will keep checking in to see your good work!!
Hey man I appreciate you watching the videos I'm all healed and doing well I'm just taking a break and being with my family I spent so many hours building that Cub Cadet 4 wheel drive days weeks and months I am going to get back on it very shortly and mother project just taking a breather thank you very much
i kinda like the roll bar idea,as big as the tractor is it looks great. glad your almost back to normal and your computer is fixed,stranger things have happened im sure
No I didn't miss it but I miss Friday I always go Saturday I drove to the parade I was going to have a video following Sunday night my camera took a dump I'm sorry I missed you it would have been a pleasure to meet you maybe next time thank you very much
JAMES johnson oh I heard you say you'll be there Friday in the video, i always wanted to see how busy Friday is instead of Saturday, everyone always said its busier on the weekdays, and I wanted the day off so we tried Friday, and it was very busy. I'll be there in November.
Thank you for your videos. I currently own 3 Cubs. a 149 that I use everyday, a 127 and 147 that are just sitting under a shed. I’m considering combining the two into a 4 wheel drive similar to yours only wanting to install tracks and use the brakes on each wheel as a way to steer. Does anyone out there know if the gear ratio on a 147 and 127 is the same in the rear end? I’ll be powering them both from the Kohler K 301 14hp. Thank you.
that is the way to go you are headed in the right direction in the long run it will work out much better your tracks will be the hardest to build I want to see when you get through with it keep me posted I'm having to sell my tractor the company sold out to another company I have nowhere to keep it so it's for sale thank you for watching my video
The bill film stand by for a while. I've been taking a break.I have been spending time with my family.it won't be long I'll be getting back on it.thank you so much
No I wish it was but unfortunately this is where I work at Aviation blade service repair helicopter blades but I'm only just the maintenance man but thank you for asking
probably won't I'm going to have to sell it have no place to keep it my company sold their business so I have to move it now I live in homeowners association no place to keep it here $1,800 you can have it even comes with another 30 horse engine thanks for watching my video
Hey what up there Travis long time no hear long time no see I hope your doing good I haven't been to Georgia over 4 years it is really good to hear from you I'll be making some videos here shortly I took a small break It's a small world really good to hear from you
could fabricate wheel spacers to solve this top heavy problem like 10 inches out..... at least your computer still works. mine is old school dual core 32 bit xp and slowly dying without the updates it's buzzing for.
Can you please tell me or send me something so I can make me one of them I really love to have me one because I live in the woods and I really need one. I have a zero turn but it gets stuck all the time and that thing you got will be all I need Thank you so much
Sir I’ve seen a lot of builds and this is by far the sharpest one I’ve seen👍
Glad your Okay,man that could of been much worse, you got our prayer for full recovery! Your doing a GREAT JOB I enjoyed seeing the update!! Get healed up, keep up the good work and have fun at FLYWHEEL!!!!
Thank you very much gif
This guy is not playing games !!.. He is badass !!!
you really know how to making a guy have a big head appreciate your comment
for the hydrostatic control you could use what is referred to as a push pull cable those are specifically designed for those stresses and can be ordered in many different securements
wholly magolly !!!.. This guy is the real deal.. that is bad ass!!!!!
thank you very much it's the sale if you want it
Love the build.
I believe about the headphones I've been seeing a whole lot of trouble with these little Bluetooth dongles for Bluetooth devices mice, keyboards, headphones, printers causing a crap load of problems even as far as not letting machines boot up.
Excellent job on your cub cadet 4X4 tractor
Thank you very much my man
looking good glad to see you are back with it keep up the good work
I am glad to be on both feet again and thank you very much
james been missing your project! Hope your all healed up and feeling like a spring chicken! I am not trying to rush your project,it is a very interesting build and i am just curious! I know your a busy man and just wanted to give you some encouragement and say keep up the great work,and I will keep checking in to see your good work!!
Hey man I appreciate you watching the videos I'm all healed and doing well I'm just taking a break and being with my family I spent so many hours building that Cub Cadet 4 wheel drive days weeks and months I am going to get back on it very shortly and mother project just taking a breather thank you very much
i kinda like the roll bar idea,as big as the tractor is it looks great. glad your almost back to normal and your computer is fixed,stranger things have happened im sure
Me too thank you very much
love the content
I don't care what anyone says, this thing is friggin' cool!!
Me too that's what I think thank you
glad you got it back straight again old friend still need to find you a murry seat to go back on it
One day I'll find one
Good project
Are those helicopter rotor blades in the background or wind turbine blades? Other?
Yes they are helicopter blades you know your stuff don't you have a nice day
I didn't see you last Friday at FL Flywheelers, did you miss the show?
No I didn't miss it but I miss Friday I always go Saturday I drove to the parade I was going to have a video following Sunday night my camera took a dump I'm sorry I missed you it would have been a pleasure to meet you maybe next time thank you very much
JAMES johnson oh I heard you say you'll be there Friday in the video,
i always wanted to see how busy Friday is instead of Saturday, everyone always said its busier on the weekdays, and I wanted the day off so we tried Friday, and it was very busy.
I'll be there in November.
no roll bar you will have more weight above the center of gravity and you can tip over easier.
Yes I'm going to put roll bars I will be putting water in the tire that take up the difference thank you for your concern
Thank you for your videos. I currently own 3 Cubs. a 149 that I use everyday, a 127 and 147 that are just sitting under a shed. I’m considering combining the two into a 4 wheel drive similar to yours only wanting to install tracks and use the brakes on each wheel as a way to steer.
Does anyone out there know if the gear ratio on a 147 and 127 is the same in the rear end? I’ll be powering them both from the Kohler K 301 14hp.
Thank you.
that is the way to go you are headed in the right direction in the long run it will work out much better your tracks will be the hardest to build I want to see when you get through with it keep me posted I'm having to sell my tractor the company sold out to another company I have nowhere to keep it so it's for sale thank you for watching my video
JAMES johnson
How much for the tractor and where are you located?
Good job !!
thank you very much
This is Travis Johnson from Albany Ga
no roll bar you know how to drive it now make it not turn as much and are you going to work the tractor any you need to build a disc for it
I will be making attachments later on it will be getting roll bars thank you for your concern
i want to see it pull
Well what's holding you I live in Kissimmee Florida come on down
It would be cool with a cab
How's the build going??
The bill film stand by for a while. I've been taking a break.I have been spending time with my family.it won't be long I'll be getting back on it.thank you so much
Nice rig !
Thank you very much sir
Nice build. Is that your shop?
No I wish it was but unfortunately this is where I work at Aviation blade service repair helicopter blades but I'm only just the maintenance man but thank you for asking
What are you going to pullbbehind it ?
probably won't I'm going to have to sell it have no place to keep it my company sold their business so I have to move it now I live in homeowners association no place to keep it here $1,800 you can have it even comes with another 30 horse engine thanks for watching my video
Hey Jamie , I just found you on You Tube, I really your videos.
Hey what up there Travis long time no hear long time no see I hope your doing good I haven't been to Georgia over 4 years it is really good to hear from you I'll be making some videos here shortly I took a small break It's a small world really good to hear from you
DO YOU HAVE LEFT AN RIGHT STEERING SPINDLES FOR A 108 CUB CADET FOR SALE. THANK YOU
I will look
Thank you
3/4 inch spindles shafts
I'm already home it with me tomorrow so I can check them out I don't know the conditions of the spindle they came off of 108
cowl tullbox2 o y
I want to build one thanks for video
Nice
could fabricate wheel spacers to solve this top heavy problem like 10 inches out..... at least your computer still works. mine is old school dual core 32 bit xp and slowly dying without the updates it's buzzing for.
I have widen the wheelbase is thought as far as I'm going to go water in the tires will do the trick thank you very much
Can you please tell me or send me something so I can make me one of them I really love to have me one because I live in the woods and I really need one. I have a zero turn but it gets stuck all the time and that thing you got will be all I need Thank you so much
HEY, I love it call it a GRIZZLY cub cadet instead
pro tip : watch movies on flixzone. Been using it for watching all kinds of movies these days.
@Andy Quincy yup, I have been watching on flixzone for since november myself :)
i promise tomorrow i'll look on that cub for you.
Alrighty then
sweet!
Don’t steer till it’s moving.
okay I'll try to remember that
The accent leaves a lot to be desired! Lol
I really like your project but your video is a little too much talking and off topic. What the hell do headphones have to do with the 4WD?
That the hell does it matter to you just don't watch my videos thank you very much
in this video you sound so bummed out your over working your mind your body just sit back and relax.
Rick what are you talking about thank you for your concern
Bad to the bone!