could you please answer below questions: 1. what Firmware you recommend 0.400 or 0.700? 2. If I downgrade to either 0.400 or 0.700 should I downgrade the RC as well? 3. Should I use patched DJI GO App along with the mod Firmware?
1) 0.400 was the one i used longer but 0.700 probably is the best ! 2) whenever you upgrade/downgrade you can KEEP RC at the firmware.. no need to touch RC firmware if you don't have problems ! 3) to get the best experience YOU MUST use patched Dji Go , for several reasons : dji is improving trash,restrictions(to fly with your drone even if modded) and connections to their servers making the app HEAVY !
Simi Travels, Thanks a lot for your clarification. I just installed the DJI GO App V37, but I can not see the FCC setting in the "About" Tab. Am I missing something ?
no my friend from that version is not possible to see FCC by tapping on About but FCC is native ;) remember always to open DJI go on your mobile, connect your RC , turn on your RC and only after all of this turn on your Drone ! in that sequence your drone will be forced in FCC, if you first turn on your drone then it won't be FCC!
Very good Tip. Could please clarify below points: 1. You mentioned that connections to DJI servers making the app heavy and may have some unwanted results , in DJI GO V37 we need to login using real account and basically in this way we establish connection with DJI servers. Do you still believe this APP is safe to use. 2. Could you please advice how to install the patched DJI GO for Ipad?
Good morning, friend ... I saw all your videos and I loved it, especially the Mavic long range with a patch of batteries .... Congratulations !! I would like to ask a question, I'm from Brazil and I have a P4P purchased for 3 weeks, how can I tell if it uses CE or FCC ?? if it were CE, is there any rack for the phantom 4 Pro to switch to FCC ?? Thank you, my friend !!
lucas moura hey Lucas sorry for late reply... well actually you could read the log from your dji go app (use a file Explorer and go into internal memory Android: DJI - dji.go.v4 - LOG - CACHE - areacode there you should see the area code.. probably US) that means you are in FCC.. another important thing is sequence to start your flight : first start dji go app(patched) connect remote controller, start it.. then as last part tune on aircraft, you'll be in FCC!
Mi piace il tuo ... perfetto e scattante inglese, quasi anglosassone 😊, ma qui sono un bugiardo ... Ad ogni modo non sono daccordo sul modificare o togliere il "safer autoland", ma diciamo e scriviamo 'safe auto landing', quello che si attiva una volta arrivato vicino al punto di atterraggio, che potrebbe essere anche molto distante da quello del decollo, attenzione, volutamente o non volutamente. È una funzionalità che ti salva, o ti può salvare il Mavic, finché la batteria ha energia a sufficenza per mantenerlo in volo stazionario. È molto importante. Ti e vi racconto una mia recentissima. Ad oggi non ho ancora personalmente modificato l'Assistant 2, ho applicato solamente una software patch (acquistata) per poter modificare solo qualche parametro, quindi attualmente, quando il puntino arriva a toccare la zona rossa della linea di livello della batteria, il molto prudenziale autolanding di default si inserisce, a sproposito, e non si può disabilitare. Mentre, dopo un volo alto e distante in montagna, il mio Mavic stava facendo un landing imposto, lassù dove si trovava a circa 2 km da me, nonostante l'ampio margine di energia residua (lo faccio volare sempre con 1 o 2 batterie aggiuntive, 2700 ... 3300 mAh in più, che l'app non vede), lo stavo guidando verso la Home Point, ma durante questo rientro, un mio smartphone Huawei, Android 5.1 che avevo collegato all'RC, ha avuto un problema, causa bugs ignoti, si è semi congelata l'app DJI GO4 che, ad un certo punto, ho dovuto chiudere e riaprire. Non era proprio il momento opportuno, anche perché il Mavic era già sceso di molto e si trovava ad una distanza di circa 500m a 200 o 300m di altezza e continuava la discesa autonoma. Ad ogni modo, forte di numerose esperienze passate, delle più strane e preoccupanti, anche usando vari devices e vari droni DJI, ho riaperto l'app che dopo essersi ricollegata al Mavic, mi ha presentato il video streaming capovolto (ruotato di 180°), quindi essendo lo smartphone tenuto fermo dalle braccia del remote controller con quel cavetto corto sulla sinistra, diventa pressoché impossibile guidare il Mavic, anche staccando lo smartphone e cercando di tenerlo lui ed il remote con le mani, è impossibile senza appoggi stabili su un piano di appoggio, soprattutto se ti trovi con il tempo contato e non riesci a vedere più dove sta volando ed a comandare l'inclinazione della fotocamera ... ecc ... Provare per credere! Stava scendendo e ruotando come una trottola. Mi succede questo da qualche tempo solamente su quel Huawei, si rovescia l'immagine già all'inizio all'apertura della app, ma non era stato così all'inizio, e per dei mesi era tutto filato liscio con quel Huawei GX8. Avevo risolto questa assurda scocciatura, ma parzialmente, installando una app che ruota lo schermo, ma funziona male e dopo la rotazione le icone delle apps sullo schermo si spostano male e si affiancano una sull'altra rendendoti anche impossibile aprire quella che ti serve! Ed in quel momento mi si apriva Chrome che stava in parte sopra, anziché DJI GO4!! Per farla breve, dopo 3 o 4 tentativi inutili per tentare di ristabilire il funzionamento normale con l'immagine dritta, perdo il contatto con il Mavic perché era ormai sceso poco sopra una fitta foresta che faceva da schermo. In quel momento stavo pensando che forse lo avevo perso per sempre, non visualizzavo a monitor il livello delle batterie non sapevo più nulla, se non che si trovava a 500m di distanza in un punto imprecisato. A quel punto sperando di non perder altro tempo prezioso, decido di prendere l'iPad mini 4 che avevo usato nel volo precedente e che uso anche con altri droni. Riesco ad avviare normalmente DJI GO4, ancora nessun video streaming, ovviamente, ma mi dirigo rapidamente con il fuoristrada nella direzione in cui mi sembrava potesse essere il Mavic, avendo anche sentito il suo ronzio durante le precedenti concitate manovre di discesa. Dopo 200 metri raggiunta una zona più aperta vedo riapparire d'improvviso il video streaming e capisco che il Mavic stava in paziente attesa dei miei comandi perché era in volo stazionario, poco sopra le cime degli abeti e non era un buon posto dove atterrare! Grande sollievo, ovviamente lo faccio risalire di 20 ... 30 metri e lo riporto verso me. Fine della vicenda, conclusasi bene, grazie al safe auto landing ed all'energia ancora a sufficienza, mi pare fosse rimasta il 20%. Se fosse stato disabilitato sarebbe andato ad incastrarsi sui rami degli alberi alti 25 metri o caduto rovinosamente a terra. Meditate gente! Non occorre trovarsi in questa condizione limite per capire la grande utilità del safe auto landing, non disabilitatelo!
on the 4.1.4 they have BLOCKED the possibility to change from CE to FCC !!!!! and once more .. if you don't need the 4.1.4 for a particular reason ( like bugs that afflict you on the earlier version) do NOT update ! the 4.1.3 works pretty well i don't need/feel to upgrade so i don't even try it !
yes my friend and NEW releases will come ! AT THE MOMENT the smartest thing to do is STAY on 4.1.3 !! why? cause it gives you all you need and above all LESS restrictions from Dji ! Obviously if you just wish to update your app you are free to do but trust me at the moment the only BUG dji wants to FIX is : BLOCK any sort of modification of their firmware/app !!!
Its pretty easy for DJI to encrypt their code so that normal user like us. we no longer can reach a text base main.js in future. But I wonder will they do the same for SDK owner or developer? sure they can still break the jail unless all of them are actually DJI employees.
Hi, great video. Are you able to confirm if this will work ( FCC mod in particular ) with Spark on Fw .0.400, controller Fw 0.100 and go4 app 4.1.3. how do you set it to not notify you of updates ?
Jat hello Jat, yes I confirm that will. work on spark.. if you go on firmware 0.500 and you update dji go app most of the tweaks and FCC will not work (at the moment), if you wish to be updated subscribe to this channel :)
Great info dear Simi. I'm planning to buy a Spark. As I read in your discussion, things will be working there too (maybe depending on the Sparks firmware and maybe it needs downgrade). The question is if I can unlock the flight modes of the Mavic (ex. Course Lock ot Home Lock) and have them working in Spark.
mihalis d hello my friend, at the moment guys working on it (slack group mostly) was able to make mavic flight modes to spark but still unable to make spark flight modes for mavic.. that would be really great indeed :) if that happens I'll surely report it:)
And another question. If I upgrade firmware from dji (like for example the one that they made for fixing some flight modes and battery problems), then how can I keep both the dji fixes and the mods we are talking about)?
my friend sorry for the late reply.. that it's up to you, more likely with higher(newer) firmware you will not be able to " free " your drone! so if it's more important a new firmware update GO FOR IT, if you decide that having 100% of control on your drone is more important than you should stick with one of the good firmware(those early fitrmware.. ) and avoid to upgrade :-)
1-In which version of the DJI assistant can I do this? in the latest version is it possible? 2- I've updated the firmware of RC too, have some problem in downgrading the Mavic and leaving without doing the RC
Max Mad hey mate, so basically here we increase the distance of the obstacles avoidance.. so if before the tweak your drone would stop/detect obstacles at 1 meter now that distance will be increased! I made also a video test but second part wasn't recorded and I was short on time.. it does detect obstacles long way before
Ciao è un pò che volo con il FW 1.3.800 con le mod e la DJI GO 4.1.3 mod; non mi ero accorto ma ora.... non funziona l'active track! Le altre modalità intelligenti funzionano ma il tracking si ferma al rettangolino verde e poi non mi dà il Go; il RC vibra e segnala "Sys Warning check app". Ho provato la 4.1.9 mod e la 4.1.10 ufficiale, ma con lo stesso risultato. Sai niente se qualche modifica ai parametri inficia l'active track?
Hello, my friend, very well explained, I only have one question? I did the height limit procedure, but for me it did not work. I could not locate the parameter (g_config_flying_height_limit_enable) to set the value 2. I have a Mavic Pro with the latest firmware. Would you help me? thankful
Me divertindo aos 50 hello my friend, actually answer is in your own message! with latest firmware you can't edit height limit :( you need to Rollback your firmware! if you need only height limit you should get back to 0.900 if you want more freedom go back to 0.700! you can find how to do it in my other videos, subscribe and check it out ;) good luck p. s. if you have mavic pro platinum things are a little more "difficult"
Mine is the Mavic Pro fly more combo. I tried to revert more in the dji assistant only after 3 options and it does not include those informed by you because they are older. Do you know how I should proceed? I'm from Brazil. Thank you
Me divertindo aos 50 yes my friend.. you need to change your firmware! in my other videos have a look at "Rollback firmware..." there i descrive how to do it! I suggest you get back to 0 700 and all your firmware will me moddable! since you have latest firmware you need to "unlock it" first! use dumlracer tool have a look here: dji.retroroms.info
Claudio sorry.. you are right that part was from my earlier video.. unfortunately i'm working too much i didn't have time to create a new part of the Dji assitant.. so i had to take the one i created earlier ! anyway nothing " lost " ;)
andrea dji was actually very smart.. to cut off the growing modding community they introduced this "new fashionable" drone and they actually did change "esc" and introduced some other restrictions but i'm kind of sure that in next months some. other exploit will change this situation ;)
Is there a setting that will remove distance limits on the drone in cases where you've not connected your phone to the RC controller? I want to be able to fly using just the DJI Goggles and RC controller.
Aaron Stone hey Aaron... unfortunatelly I'm not aware of that option! but I believe wifi control will limit you not just in distance! few people risked to lose the drone! anyway if you find a solution please report here.. other people will be happy to know it
Question for ya! Why no matter what version of DJI Assistant I use...in the string it looks like this //mainWindow.webContents.openDevTools() Instead of this // mainWindow.webContents.openDevTools() If you notice the first string has no space between the 2nd and 3rd character. When I delete just the 2 characters save it then try to open the assistant up I get a java error message and it will not open. The only option then is to reboot the win 8 pc uninstall and reinstall with no debug mode???????????
William H. Hutchinson hey mate mmm I used a couple of dji assistant and I just had this string(the one in the video) honestly if you can still access debug mode I'd say it's ok.. are u still able to enter debug mode?
William H. Hutchinson William sorry I'm at work.. so when you modify that string you can't access debug mode? get the file from my link(on the channel main page scroll and find link) get that dji assistant version.. change file string as in the video, then when you start dji assistant write 1 in debug string.. let me know
Simi Travels thank so much for the info ! I'm using spark and iOS I have already tried config files I believe latest firmware/update has blocked exploit 🤔😟
yes... 0.500 right? that one disable any sort of exploit ! if you really really need it there is a chance to downgrade .. but i'd say do it just if it's so important for you !
Gh0stxSinghx ghost as long as you are able to copy those config files i'd say yes.. but i'd also suggest to don't keep the app updated.. dji is doing its best to prevent any sort of tweak to its app! if you don't have any sort of bug/problem stay with your actual dji go app ;)
i wanna remove limit altitude on my mavic pro, my question is, in list of parameter i dont have "g_config_flying_limit_height_limit_enabled" ? fyi my firmware is v01.04.0200 . i must downgrade a firmware or not? thanks
Rian Nugraha hey my friend sorry for the late reply.. yes on that firmware you can NOT change most of the parameters.. if you need to change them Rollback at least to 0.700...
When I try enter a value to change the height limitations and hit enter, it reverts back to the original value. Does this mean they have blocked my version? I am able to change other parameters. Thanks!
Hi simi travels, can i do that same things on my phantom 4 to disable rth at low battery? Because while i climb 1800m asl at 68% battery it forcefully landed due his rth unable to cancelled, my current firmware is 01.02.0602.
Muhamad Nurshahdatul Nazrin hello friend.. about p4p I've to ask.. or hopefully one of the users here will reply! are you able to enter dji assistant 2 in debug mode? if you can then you just need to change the type of battery.. let me know
Simi Travels, i'm is a p4 standard user, i had pass to debugg on dji assist 2. Can you show me by step how to disable that rth at low battery on these parameter?
Simi Travels How long to survive of battery while reach 0%, i mean how long of more time to hold out after 0% of battery before most dji drone will be drop itself on the ground by it's really empty?
my friend sorry for late reply.. follow instructions here : github.com/jezzab/DUMLdore if you have doubts PLEASE wait few more days..(the point is.. if you screw it than you might brick your drone!) tomorrow i should be able to make a video to HOW to downgrade, many users already requested it to me !
Hi my friend. I would like to let the cinematic slow down at speed. It looks like this: 0.8999999761581421. Can you tell me what it would be like to stay less speedy?
So I did everything, but my Dji Assistant 2, does not have as long of a list of tabs on the left, and it can’t identify my firmware? “Parameters” is not in my list on the left screen of Assistant 2. Any advice anyone can give?
did you change the debug value from o to 1? That's when you get the longer list on the left that should have parameters in it. I had to scroll down to see it.
Anďelko Lončar my friend.. p4p has, it seems, a different story.. beside the fact that you should not use a more recent firmware to activate some of the modifications try to have a look over dji slack... maybe they can help
Thx for such a fast answer but it sounds to me 500 up is the most i will get! Btw,..DJI slack,..forgive me but what exactly you meant,..the term slack i am not that familiar with here?
Anďelko Lončar if I had p4p I'd do my own test and report here.. i've a mavic that's why on p4p I've less knowledge! try to Google dji slack you'll get to join dji chat over slack, once there you can ask about p4p! one thing is sure, if you are using one of the latest firmware you'll probably won't be able to enable any of the modifications
You are right,.. i am using latest firmware to fly my p4p,..coz i found only two options,..DJI and DJI GO 4 when searched for download,..and since DJI GO 4 was, or is, the only one to fly my p4p that was the only thing i could do! Somehow i think it is also impossible to fly p4p without latest DJI GO 4 app! Anyway thx again for answering me! Have a nice day and i wish you all the best!!
when i type in search bar of parameters g_config_airport_limit_cfg_cfg_disable_fly_limit and g_config_airport_limit_cfg_cfg_limit_data They do not appear in the menu. what's going on....
nikolas.. tell me more.. your drone and your firmware , if you don't see them i'm afraid you are on one of those firmwares where dji already blocked any change !
INDEX 0:16 Dji Assistant in DEBUG MODE 1:56 RTH+ Return To Home 2:31 Sport + 3:21 Max Altitude 3:53 Safer autoland 5:02 Obstacle Avoidance + 5:21 REMOVE wind alert 5:40 No Fly Zone NFZ remove 6:08 Safer Auto Take off 6:28 GPS+ Higher speed in drone normal mode
hi fyi the altitude limit removal does not appear in my version of the assistant and the old beta version on your site does not detect the spark. firmware 500
rob924678 is not assistant the problem... is your spark firmware.. 0.500 is not suitable for these moddings, if you still want to use them downgrade rob
Hi, I live in NFZ nearby Disneyland, I’ll buy Dji Mavic Air and can I change parameters with instruction on video? Let me instruction (Ah, I want to fly for fun)
tbh i only want to modify it to fly over 500m, probably set it to 1200m. another question, does the modifications reset after firmware updates?, also does it show in the settings that you have modified the max altituide, so instead of saying 20 - 500m it ses 20 - 1200m?
trust me, once you reach 1200 then you wannareach 1500 then 2000 LOL.. until you get scared ahaha ! me i went up to 2200 (away from things and properties) in the middle of the night ! if you can change those parameters there'll be NO evidence in the app and depending by firmware( not talking about AIR but mavic pro) than setting MIGHT reset !
could you please answer below questions:
1. what Firmware you recommend 0.400 or 0.700?
2. If I downgrade to either 0.400 or 0.700 should I downgrade the RC as well?
3. Should I use patched DJI GO App along with the mod Firmware?
1) 0.400 was the one i used longer but 0.700 probably is the best ! 2) whenever you upgrade/downgrade you can KEEP RC at the firmware.. no need to touch RC firmware if you don't have problems ! 3) to get the best experience YOU MUST use patched Dji Go , for several reasons : dji is improving trash,restrictions(to fly with your drone even if modded) and connections to their servers making the app HEAVY !
Simi Travels, Thanks a lot for your clarification. I just installed the DJI GO App V37, but I can not see the FCC setting in the "About" Tab. Am I missing something ?
no my friend from that version is not possible to see FCC by tapping on About but FCC is native ;) remember always to open DJI go on your mobile, connect your RC , turn on your RC and only after all of this turn on your Drone ! in that sequence your drone will be forced in FCC, if you first turn on your drone then it won't be FCC!
Very good Tip. Could please clarify below points:
1. You mentioned that connections to DJI servers making the app heavy and may have some unwanted results , in DJI GO V37 we need to login using real account and basically in this way we establish connection with DJI servers. Do you still believe this APP is safe to use.
2. Could you please advice how to install the patched DJI GO for Ipad?
Un altro video... Stupemdo.... Grazie
Good morning, friend ... I saw all your videos and I loved it, especially the Mavic long range with a patch of batteries .... Congratulations !!
I would like to ask a question, I'm from Brazil and I have a P4P purchased for 3 weeks, how can I tell if it uses CE or FCC ??
if it were CE, is there any rack for the phantom 4 Pro to switch to FCC ??
Thank you, my friend !!
lucas moura hey Lucas sorry for late reply... well actually you could read the log from your dji go app (use a file Explorer and go into internal memory Android:
DJI - dji.go.v4 - LOG - CACHE - areacode there you should see the area code.. probably US) that means you are in FCC.. another important thing is sequence to start your flight : first start dji go app(patched) connect remote controller, start it.. then as last part tune on aircraft, you'll be in FCC!
So to save this work, just turn off the Mavic and restart?
Great vid
Is there a way to enable the 5.8 ghz?
It's disabled in my country but i would like to use it :)
Mi piace il tuo ... perfetto e scattante inglese, quasi anglosassone 😊, ma qui sono un bugiardo ...
Ad ogni modo non sono daccordo sul modificare o togliere il "safer autoland", ma diciamo e scriviamo 'safe auto landing', quello che si attiva una volta arrivato vicino al punto di atterraggio, che potrebbe essere anche molto distante da quello del decollo, attenzione, volutamente o non volutamente.
È una funzionalità che ti salva, o ti può salvare il Mavic, finché la batteria ha energia a sufficenza per mantenerlo in volo stazionario.
È molto importante.
Ti e vi racconto una mia recentissima.
Ad oggi non ho ancora personalmente modificato l'Assistant 2, ho applicato solamente una software patch (acquistata) per poter modificare solo qualche parametro, quindi attualmente, quando il puntino arriva a toccare la zona rossa della linea di livello della batteria, il molto prudenziale autolanding di default si inserisce, a sproposito, e non si può disabilitare.
Mentre, dopo un volo alto e distante in montagna, il mio Mavic stava facendo un landing imposto, lassù dove si trovava a circa 2 km da me, nonostante l'ampio margine di energia residua (lo faccio volare sempre con 1 o 2 batterie aggiuntive, 2700 ... 3300 mAh in più, che l'app non vede), lo stavo guidando verso la Home Point, ma durante questo rientro, un mio smartphone Huawei, Android 5.1 che avevo collegato all'RC, ha avuto un problema, causa bugs ignoti, si è semi congelata l'app DJI GO4 che, ad un certo punto, ho dovuto chiudere e riaprire.
Non era proprio il momento opportuno, anche perché il Mavic era già sceso di molto e si trovava ad una distanza di circa 500m a 200 o 300m di altezza e continuava la discesa autonoma.
Ad ogni modo, forte di numerose esperienze passate, delle più strane e preoccupanti, anche usando vari devices e vari droni DJI, ho riaperto l'app che dopo essersi ricollegata al Mavic, mi ha presentato il video streaming capovolto (ruotato di 180°), quindi essendo lo smartphone tenuto fermo dalle braccia del remote controller con quel cavetto corto sulla sinistra, diventa pressoché impossibile guidare il Mavic, anche staccando lo smartphone e cercando di tenerlo lui ed il remote con le mani, è impossibile senza appoggi stabili su un piano di appoggio, soprattutto se ti trovi con il tempo contato e non riesci a vedere più dove sta volando ed a comandare l'inclinazione della fotocamera ... ecc ...
Provare per credere!
Stava scendendo e ruotando come una trottola.
Mi succede questo da qualche tempo solamente su quel Huawei, si rovescia l'immagine già all'inizio all'apertura della app, ma non era stato così all'inizio, e per dei mesi era tutto filato liscio con quel Huawei GX8.
Avevo risolto questa assurda scocciatura, ma parzialmente, installando una app che ruota lo schermo, ma funziona male e dopo la rotazione le icone delle apps sullo schermo si spostano male e si affiancano una sull'altra rendendoti anche impossibile aprire quella che ti serve!
Ed in quel momento mi si apriva Chrome che stava in parte sopra, anziché DJI GO4!!
Per farla breve, dopo 3 o 4 tentativi inutili per tentare di ristabilire il funzionamento normale con l'immagine dritta, perdo il contatto con il Mavic perché era ormai sceso poco sopra una fitta foresta che faceva da schermo.
In quel momento stavo pensando che forse lo avevo perso per sempre, non visualizzavo a monitor il livello delle batterie non sapevo più nulla, se non che si trovava a 500m di distanza in un punto imprecisato.
A quel punto sperando di non perder altro tempo prezioso, decido di prendere l'iPad mini 4 che avevo usato nel volo precedente e che uso anche con altri droni.
Riesco ad avviare normalmente DJI GO4, ancora nessun video streaming, ovviamente, ma mi dirigo rapidamente con il fuoristrada nella direzione in cui mi sembrava potesse essere il Mavic, avendo anche sentito il suo ronzio durante le precedenti concitate manovre di discesa.
Dopo 200 metri raggiunta una zona più aperta vedo riapparire d'improvviso il video streaming e capisco che il Mavic stava in paziente attesa dei miei comandi perché era in volo stazionario, poco sopra le cime degli abeti e non era un buon posto dove atterrare!
Grande sollievo, ovviamente lo faccio risalire di 20 ... 30 metri e lo riporto verso me.
Fine della vicenda, conclusasi bene, grazie al safe auto landing ed all'energia ancora a sufficienza, mi pare fosse rimasta il 20%.
Se fosse stato disabilitato sarebbe andato ad incastrarsi sui rami degli alberi alti 25 metri o caduto rovinosamente a terra.
Meditate gente!
Non occorre trovarsi in questa condizione limite per capire la grande utilità del safe auto landing, non disabilitatelo!
Claudio Costerni Claudio appena trovo un pc a lavoro ti rispondo, grazie della tua esperienza, contento che sia finita nel migliore dei modi ;)
Hi. Will this work on the Phantom 4 standard? If yes, which firmware is best on Phantom 4?
Thank You
Hello Simi , is it safe to use FCC mod on DJI GO4 version 4.1.4 ? I am using 4.1.3 it works great. (iOS)
on the 4.1.4 they have BLOCKED the possibility to change from CE to FCC !!!!! and once more .. if you don't need the 4.1.4 for a particular reason ( like bugs that afflict you on the earlier version) do NOT update ! the 4.1.3 works pretty well i don't need/feel to upgrade so i don't even try it !
Simi Travels Thank you ! By the time I'm writing 4.1.5 was out.
yes my friend and NEW releases will come ! AT THE MOMENT the smartest thing to do is STAY on 4.1.3 !! why? cause it gives you all you need and above all LESS restrictions from Dji ! Obviously if you just wish to update your app you are free to do but trust me at the moment the only BUG dji wants to FIX is : BLOCK any sort of modification of their firmware/app !!!
Its pretty easy for DJI to encrypt their code so that normal user like us. we no longer can reach a text base main.js in future. But I wonder will they do the same for SDK owner or developer? sure they can still break the jail unless all of them are actually DJI employees.
Hi, great video. Are you able to confirm if this will work ( FCC mod in particular ) with Spark on Fw .0.400, controller Fw 0.100 and go4 app 4.1.3.
how do you set it to not notify you of updates ?
Jat hello Jat, yes I confirm that will. work on spark.. if you go on firmware 0.500 and you update dji go app most of the tweaks and FCC will not work (at the moment), if you wish to be updated subscribe to this channel :)
Simi Travels Hi, can you do a specific video for the spark which also includes the never update option aswell as the forces FCC.
Great info dear Simi. I'm planning to buy a Spark. As I read in your discussion, things will be working there too (maybe depending on the Sparks firmware and maybe it needs downgrade). The question is if I can unlock the flight modes of the Mavic (ex. Course Lock ot Home Lock) and have them working in Spark.
mihalis d hello my friend, at the moment guys working on it (slack group mostly) was able to make mavic flight modes to spark but still unable to make spark flight modes for mavic.. that would be really great indeed :) if that happens I'll surely report it:)
so if you use modded app 4.1.3 v25 yes you can use mavic flight modes in spark :)
And another question. If I upgrade firmware from dji (like for example the one that they made for fixing some flight modes and battery problems), then how can I keep both the dji fixes and the mods we are talking about)?
my friend sorry for the late reply.. that it's up to you, more likely with higher(newer) firmware you will not be able to " free " your drone! so if it's more important a new firmware update GO FOR IT, if you decide that having 100% of control on your drone is more important than you should stick with one of the good firmware(those early fitrmware.. ) and avoid to upgrade :-)
1-In which version of the DJI assistant can I do this? in the latest version is it possible?
2-
I've updated the firmware of RC too, have some problem in downgrading the Mavic and leaving without doing the RC
So helpful! I need to ask you a question or 2 when you got time.
Ciao Simi, questa volta è valido anche per lo Spark? Mi riferisco in particolare alla rimozione dei nfz
Ciao Guerino si.. però se hai lo spark con firmware 0.500 purtroppo non puoi modificare in pratica nulla :-( forse solo FCC
Gli altri parametri non c'erano nemmeno col firmware precedente purtroppo.
guerino per lo spark se vuoi NFZ rimosso ti conviene installare un APP con il NFZ rimosso...
redo sia l'unica!
il problema è trovarne una per ios...
Hey bro wats change OA+ pls exactly thx for all
(About 16 to 23 ? and 1 to 3 ? )
Max Mad hey mate, so basically here we increase the distance of the obstacles avoidance.. so if before the tweak your drone would stop/detect obstacles at 1 meter now that distance will be increased! I made also a video test but second part wasn't recorded and I was short on time.. it does detect obstacles long way before
Max Mad distance value is set in meters
Hi, do you know how to change active tracking height from 3 meters to 1m? I would like to track object from 1 meter height
Ciao è un pò che volo con il FW 1.3.800 con le mod e la DJI GO 4.1.3 mod; non mi ero accorto ma ora.... non funziona l'active track! Le altre modalità intelligenti funzionano ma il tracking si ferma al rettangolino verde e poi non mi dà il Go; il RC vibra e segnala "Sys Warning check app". Ho provato la 4.1.9 mod e la 4.1.10 ufficiale, ma con lo stesso risultato. Sai niente se qualche modifica ai parametri inficia l'active track?
Grazie tante
prego Luka, contento che sia utile !
after making the changes can you go out of debug or do u need to stay there?
sure... once the edit is done parameters are saved and you can exit debug !
Sorry, dont finde my config! config_flying_limit_height_limit_enabled=2 haVe a PRO 4;help me!
I wtached your video. Is it always possible to restore to original settings. How to do that ?
easier than you could even imagine "reset" and original settings are back :)
I was able to fly in a nfz, but I had a warning the entire time. Any way to disable warning?
Does this work in phantom 4 pro?
Hello, my friend, very well explained, I only have one question?
I did the height limit procedure, but for me it did not work.
I could not locate the parameter (g_config_flying_height_limit_enable) to set the value 2.
I have a Mavic Pro with the latest firmware.
Would you help me?
thankful
Me divertindo aos 50 hello my friend, actually answer is in your own message! with latest firmware you can't edit height limit :( you need to Rollback your firmware! if you need only height limit you should get back to 0.900 if you want more freedom go back to 0.700! you can find how to do it in my other videos, subscribe and check it out ;) good luck p. s. if you have mavic pro platinum things are a little more "difficult"
Mine is the Mavic Pro fly more combo.
I tried to revert more in the dji assistant only after 3 options and it does not include those informed by you because they are older.
Do you know how I should proceed?
I'm from Brazil.
Thank you
Me divertindo aos 50 yes my friend.. you need to change your firmware! in my other videos have a look at "Rollback firmware..." there i descrive how to do it! I suggest you get back to 0
700 and all your firmware will me moddable! since you have latest firmware you need to "unlock it" first! use dumlracer tool have a look here: dji.retroroms.info
Simi Travels ok, thank you very much
Me divertindo aos 50 Goodluck my friend :)
Hi, I can't find the main.js file in the appfile folder.. any tips?
Audio and video cutted at the beginning. What was before?
Claudio sorry.. you are right that part was from my earlier video.. unfortunately i'm working too much i didn't have time to create a new part of the Dji assitant.. so i had to take the one i created earlier ! anyway nothing " lost " ;)
can I adjust this for my spark. is it ok 8m height per second for the spark? It seems to me that it is too demanding for him.
not for the spark :/ sorry
@@SimiTravels aa ok :/. do you maybe know where I can find correct parameters for spark?
@@matesaric3700 try to search for slack community "Dji reverse engineering" maybe someone there can help
Hello ... is possible dji mavic pro alpine edition have the possibility of not returning a previous firmware? Thanks
andrea at the moment I don't think mods are working for mavic pro alpine.. if i get some more news I'll get back to you...
Simi Travels 👍😁
andrea dji was actually very smart.. to cut off the growing modding community they introduced this "new fashionable" drone and they actually did change "esc" and introduced some other restrictions but i'm kind of sure that in next months some. other exploit will change this situation ;)
Thanks 🙏🏻
Glad you enjoyed it !
Is there a setting that will remove distance limits on the drone in cases where you've not connected your phone to the RC controller? I want to be able to fly using just the DJI Goggles and RC controller.
Aaron Stone hey Aaron... unfortunatelly I'm not aware of that option! but I believe wifi control will limit you not just in distance! few people risked to lose the drone! anyway if you find a solution please report here.. other people will be happy to know it
If I find it I will. Thanks.
I just confirmed. The NFZ removal hack also removes geofencing while no phone is connected to the RC controller.
Aaron Stone wonderful! thank you my friend, this might help other users as well!
Question for ya! Why no matter what version of DJI Assistant I use...in the string it looks like this //mainWindow.webContents.openDevTools() Instead of this // mainWindow.webContents.openDevTools() If you notice the first string has no space between the 2nd and 3rd character. When I delete just the 2 characters save it then try to open the assistant up I get a java error message and it will not open. The only option then is to reboot the win 8 pc uninstall and reinstall with no debug mode???????????
William H. Hutchinson hey mate mmm I used a couple of dji assistant and I just had this string(the one in the video) honestly if you can still access debug mode I'd say it's ok.. are u still able to enter debug mode?
Absolutely no debug mode????
Absolutely no debug mode......
William H. Hutchinson William sorry I'm at work.. so when you modify that string you can't access debug mode? get the file from my link(on the channel main page scroll and find link) get that dji assistant version.. change file string as in the video, then when you start dji assistant write 1 in debug string.. let me know
Simi Travels sorry didn't mean to disturb you at work. .you mean the beta version of the assistant correct?
Can you force FCC mode this way ?
Droneboy no ! but you can get (link www.simiweb.net/mavic.htm) the app with FCC forced for Android or for IOS the config files ...
Simi Travels thank so much for the info ! I'm using spark and iOS I have already tried config files I believe latest firmware/update has blocked exploit 🤔😟
yes... 0.500 right? that one disable any sort of exploit ! if you really really need it there is a chance to downgrade .. but i'd say do it just if it's so important for you !
Gh0stxSinghx ghost as long as you are able to copy those config files i'd say yes.. but i'd also suggest to don't keep the app updated.. dji is doing its best to prevent any sort of tweak to its app! if you don't have any sort of bug/problem stay with your actual dji go app ;)
Simi Travels this is the best advise 👍
i wanna remove limit altitude on my mavic pro, my question is,
in list of parameter i dont have "g_config_flying_limit_height_limit_enabled" ?
fyi my firmware is v01.04.0200 .
i must downgrade a firmware or not?
thanks
Rian Nugraha hey my friend sorry for the late reply.. yes on that firmware you can NOT change most of the parameters.. if you need to change them Rollback at least to 0.700...
Simi Travels whoa, thanks for your support 👍
supporteed dji spark 0.600 firmware ?
Va bene anche per il p3 ADV con l'ultimo fw?
guerino al momento non ho alcun feedback in merito ! non posso darti conferma ( quale è l'ultimo firmware che hai installato?)
I don't have a main.js file ... any suggestions?
When I try enter a value to change the height limitations and hit enter, it reverts back to the original value. Does this mean they have blocked my version? I am able to change other parameters. Thanks!
my friend which drone and which firmware ?
I have the P4 with the following firmware...App 4.1.9, Aircraft 01.02.0602, Remote 1.8.0. I appreciate any help you can provide.
William Kelley I wish I could help on p4.. but personally I can't :( I'll try to ask around and report to you
Thanks, I appreciate it if you can check around.
Hi simi travels, can i do that same things on my phantom 4 to disable rth at low battery? Because while i climb 1800m asl at 68% battery it forcefully landed due his rth unable to cancelled, my current firmware is 01.02.0602.
Muhamad Nurshahdatul Nazrin hello friend.. about p4p I've to ask.. or hopefully one of the users here will reply! are you able to enter dji assistant 2 in debug mode? if you can then you just need to change the type of battery.. let me know
Simi Travels, i'm is a p4 standard user, i had pass to debugg on dji assist 2. Can you show me by step how to disable that rth at low battery on these parameter?
Muhamad Nurshahdatul Nazrin sure look here
th-cam.com/video/PKAvA-UgC0k/w-d-xo.html
Simi Travels How long to survive of battery while reach 0%, i mean how long of more time to hold out after 0% of battery before most dji drone will be drop itself on the ground by it's really empty?
Can you look the parameter for orbit and waypoints under 5 meters ??
unofrtunately they weren't able to modify those parameters :(
Hi! I have Mavic in firmware 0.300. How can upgrade to version 0.400?
Toni Tijeras hey Tony sorry for the delay.. you need to use a tool Dumldore.. with that you can basically use any format you wish to use..
Hello,
I have problem with NFZ ... with mavic pro
I have not the same info on the DJI assistant screen ...?!
Laurent Bressan hey Laurent ciao, please tell me on your mavic what's the firmware ;) if is 0.900 you should consider downgrade to 0.700
Simi Travels hello and thank for your prompt answer, I have the V01-03-0900 .
How do you downgrade to the 700 ?
my friend sorry for late reply.. follow instructions here :
github.com/jezzab/DUMLdore
if you have doubts PLEASE wait few more days..(the point is.. if you screw it than you might brick your drone!) tomorrow i should be able to make a video to HOW to downgrade, many users already requested it to me !
why i cant see main.js in app files? Please help. DJI Assistant 2 v1.2.5
you need an old software i got it ... i can see and modify
Hi my friend. I would like to let the cinematic slow down at speed. It looks like this: 0.8999999761581421.
Can you tell me what it would be like to stay less speedy?
So I did everything, but my Dji Assistant 2, does not have as long of a list of tabs on the left, and it can’t identify my firmware? “Parameters” is not in my list on the left screen of Assistant 2. Any advice anyone can give?
did you change the debug value from o to 1? That's when you get the longer list on the left that should have parameters in it. I had to scroll down to see it.
jerome fisher yes I have long ago figured it out. Thank you
I tried it on my new P4P but it doesn't work,..any idea how to do it??
Anďelko Lončar my friend.. p4p has, it seems, a different story.. beside the fact that you should not use a more recent firmware to activate some of the modifications try to have a look over dji slack... maybe they can help
Thx for such a fast answer but it sounds to me 500 up is the most i will get! Btw,..DJI slack,..forgive me but what exactly you meant,..the term slack i am not that familiar with here?
Anďelko Lončar if I had p4p I'd do my own test and report here.. i've a mavic that's why on p4p I've less knowledge! try to Google dji slack you'll get to join dji chat over slack, once there you can ask about p4p! one thing is sure, if you are using one of the latest firmware you'll probably won't be able to enable any of the modifications
You are right,.. i am using latest firmware to fly my p4p,..coz i found only two options,..DJI and DJI GO 4 when searched for download,..and since DJI GO 4 was, or is, the only one to fly my p4p that was the only thing i could do! Somehow i think it is also impossible to fly p4p without latest DJI GO 4 app! Anyway thx again for answering me! Have a nice day and i wish you all the best!!
when i type in search bar of parameters
g_config_airport_limit_cfg_cfg_disable_fly_limit and
g_config_airport_limit_cfg_cfg_limit_data
They do not appear in the menu.
what's going on....
nikolas.. tell me more.. your drone and your firmware , if you don't see them i'm afraid you are on one of those firmwares where dji already blocked any change !
i have the mavic adout a week.i has the last version v01.03.0900.
The problem is only with the NFZ all the others parameters working fine.
I don t have this file Main.js in the folder of assistant .
Daniel Aleksandrov Daniel you are using a recent assistant version.. you won't be able to make modifications with that :/
guys if for any reasons your dji assistant 2 is not going into DEBUG mode, operate without internet connection! so no internet and use dji assistant!
INDEX
0:16 Dji Assistant in DEBUG MODE
1:56 RTH+ Return To Home
2:31 Sport +
3:21 Max Altitude
3:53 Safer autoland
5:02 Obstacle Avoidance +
5:21 REMOVE wind alert
5:40 No Fly Zone NFZ remove
6:08 Safer Auto Take off
6:28 GPS+ Higher speed in drone normal mode
hi fyi the altitude limit removal does not appear in my version of the assistant and the old beta version on your site does not detect the spark. firmware 500
rob924678 is not assistant the problem... is your spark firmware.. 0.500 is not suitable for these moddings, if you still want to use them downgrade rob
Hi, I live in NFZ nearby Disneyland, I’ll buy Dji Mavic Air and can I change parameters with instruction on video? Let me instruction (Ah, I want to fly for fun)
no my friend :( sorry but this is all for DJI MAVIC PRO.. not air :(
If I have Dji spark, can I change parameters?
Can I change parameters in Dji Spark, plz tell me
does this work on the mavic air?
Hey Kevin, at the moment is Mavic Air is still being " discovered " , hopefully soon ;)
thanks for the quick response :), im getting mine in 30 some days
Kevin woaw congratulations :) it's a wonderful drone.. just afraid how and when we will be able to. modify it :)
tbh i only want to modify it to fly over 500m, probably set it to 1200m. another question, does the modifications reset after firmware updates?, also does it show in the settings that you have modified the max altituide, so instead of saying 20 - 500m it ses 20 - 1200m?
trust me, once you reach 1200 then you wannareach 1500 then 2000 LOL.. until you get scared ahaha ! me i went up to 2200 (away from things and properties) in the middle of the night ! if you can change those parameters there'll be NO evidence in the app and depending by firmware( not talking about AIR but mavic pro) than setting MIGHT reset !