Thanks for taking the time to make this video. My turn signal bulb just went out. Now I know what to do. Cheers!
Thanks dude, very helpful.
Thank you for this content! I was stressing because I need to change this exact bulb (and maintenance per hour in my area is very expensive) your video explains this in a way where I might be able to do this by myself!!! 😃
@@jfGarage4k I DID IT!!! I didn’t have tools to take my tire off or lift it off the ground like you did, so I turned my wheel all the way to the left. I watched this video so many times to get the “anatomy” of the car down and I DID IT!!! THANK YOU SO SO SO MUCH!!!! (It only took me 20 minutes and I removed only 3 screws !!). I wouldn’t have been able to do this without your tutorial, I’m so thankful!
Im glad this video help you out, Please share and subscribe to support the channel
You took off waaaaayyyyyyy more than you should. I didn’t have to get under the car to unscrew anything. Behind the tire area is all you need
This was my first time doing this on a Cadillac. Thanks for the heads-up Champ
I like the fact that he took off way more because he showed a lot more of the inside for the educational purposes. Now I know exactly where to find the bulb when I go to change mine.
Thanks for the video! I had one just burn out. I’m pretty sure tho.. if you grab that new bulb with your bare hands you will shorten the life of the bulb. I think because of the natural body oil produced by ur skin..
Nice informative video. Thank you for posting. Soooooooooooooo, I have to change the headlight in a 2013 Cadillac CTS and I have to take of much of the front bumper. I was going to change the turn signal too while I was there. The two aren't accessible from the same location?
Ya on the Cts the signal bulb different compare to Ats. The design is way different and its different to access from the back, u gonna need to pull the bumper facia and wheel liner out
Are you serious?😂 To change some light you must take off front bumper??
cool i was able to change both headlight bulbs without taking tire off
Can you show how to do the rear tail light replacement
I never done rear taillights replacement on ats before, looking at this diagram on my Server information. Just peel back trunk liner and you well see 3 or 4 bolt at the back of the taillights loosen them off and u can pop that taillamp off right after
Is it the same on 2011 srx?
Do You Have A Video On The HID BALLAST??
@@jfGarage4k I’m Trying To Replace The Ballast On My Passenger Side My Headlight Isn’t Working
In my 2014 ats i get the same error but for the right side, problem is that not even the mirror light comes on and also my driver side nighttime taillight won’t turn on
@@jay4tv476 lmao turns out it was just a fuse in the trunk compartment, i was getting ready to take it to the dealer but as i was taking my system out i found the fuse box
Do u have the link for this bulb?
Yes here the link for it www.ebay.ca/itm/ACDelco-13579188-Light-Bulb-For-Select-Buick-Cadillac-Chevrolet-GMC-Saab-Models-/254902837730?mkcid=16&mkevt=1&_trksid=p2349624.m46890.l6249&mkrid=711-127632-2357-0
Hello kiddos 👶
It's not a good idea to have the garage door closed with the car running.
They should have just put LED bulbs in the vehicle in the first place.
Your right on that.. but this halogen bulb is cheap to get, It they put led on this setup from the factory people/customers going to start complaining why this bulb expensive lol
Maaaan that’s a lot to do just to change a damn bulb 💡 🥴😩🤦🏾♂️
Don’t take all that off turn ur tire bend that tire wheel liner. Wear gloves please
Two maybe 3 retainer screws turn the wheel towards opposite side your working on. The covers are cloth/plastic, bend it back reach inside and its literally within hands reach. Twist, remove, replace and then twist back into place. I change the color bulbs in mine often