the white insulation on top the magnets and underneath the ring gear is almost certainly asbestos, which I seem to remember removing from old transformers I took apart as a kid - probably similar to or same as asbestos tape and paste that plumbers used for thermal insulation before it was banned . . . it must have had good electrical resistance too (most thermal insulators do). The jar is almost certainly a capacitor, the earliest form of which was the Leyden Jar (1800's) - a glass container (dielectric material, an insulator or actually low semi-conductor) with metal foil (silver, originally) wrapped outside as the ground and inside as the other terminal (originally they had water inside, and later ones used vinegar or other electrolytic acid to form a battery, experimenting with different electrode materials - copper, lead, zinc, iron. Also related to electro-plating). The long coil that you've built for the grounding tube almost certainly goes with the Leydon capacitor to form a resonant coupling connection with ground, and from the apparent size of coil and jar it looks just about right the size for the schumann frequencies at around seven hertz, which can be seen as magneto-inductive waves (spiking) on an oscilloscope. So . . . yeah, that might be where the "free" energy is coming from and to, oscillating between . . . literally the earth and the heavens, infinity in all directions . . . looks like the magnetic motor-generator system (i think it's both at the same time) acts as a rectifier of planetary-atmospheric electro-magnetic and magneto-electric oscillations (they're the same thing, but two sides of the energy equation, see Eric Doddard -- still a wee bit over me' head) There is general agreement now among physicists that the "zero point energy" really does exist, and is enormous (actually the zero point in question has an arbitrary "infinitely small" volume, compared to the size of us - it's a measurement term - and there are power waves passing through in all directions all the time of all different frequencies) . . . the question is how to tap it. It has been done now with solid state (semi-conductor) electronics at a very low level in the higher frequencies, with arrays of micro-antennas of many different sizes (for different frequencies) arranged in all directions . . . then simply rectify the captured waves! They believe they can charge a cell phone continuously this way some day, the principle works in the lab already (this was in Scientific American, almost ten years ago). Also, photo-electric effect (solar cells) and Hall sensors are examples of real free energy devices, well developed theoretically and industrially. There is a rectifier effect, in all these methods, to get useful energy. That motor . . . rectifies natural electro-magnetism into rotational mechanical energy? then back into electricity again? magnetism ?? let's see, feedback output signal into input to get resonance, and new energy comes in with every collapsing magneto-electric field cycle?? gets passed through motor . . . then dispelled . . . . . . . I'll need to think about where it gets dispelled to, at a lower available energy level, in this galactic entropy cycle . . . oh yeah . . . . it's all related to the galaxies' spinning electro-magnetic and magneto-electric fields . . . yeah, we'll think about that! pfm_2014_05_27
Hi, the more I look at it, the more it has a lot of similarity with the Albach magnet Array. When assembled in a circle, depending on the start of the array, the magnetic flux if concentrated outside the ring for example just like your rotating machine and no magnet flux inside of the ring - neutral point like you described in one of you video. However, you have one advandage, your coils in the V magnets!
it was an antenna on top of the building. later on it was replaced in some form by a huge iron disk. it is now covered up in concrete. that antenna is how u increase the power of the em field.
setting up the pmh in conjunction with the apparatus is the key. te wooden block that has 2 removable screws is your key to figure it out how to set it up. it MIGHT attach to the pipe coming out of the ground.
Hi, there is more to that picture then what shown in those books. Also that idea on the going spark gap @20:15 needs rethinking. What your suggesting it that the spark gap is hand operated and all that HIGH voltage current he is producing is flowing right through the palm his hand. Keep up the good work on replicating eds magnetic fly wheel.
i am having difficulty visualizing the mag field around and inside that wheel. It sure would be helpful if you could draw a rough diagram showing the shape of the field. It sounds like it is cone shaped but I am not sure.
But there is also the round sphere's, sitting on top of the inside magnets. I believe that there are 4 . And the key in the center goes out to the one sphere. That seems to be a spark gap. Of some sort. And the handle released when to much energy was built up. Thanks for posting. Keep them coming
the glass bottle on top of the flange in the pic is an intersting issue. the closest ive come to solving it is that according to eric dollard, the dielectric material is used to reduce electricity from the field without reducing the emism. the opposite would be true if u wanted to increase electricity, i.e. add more magnetic material. if u can visualize in your mind whats going on with the north and south pole magnets, all the metal grounded to the earth is gonna make a huge field. the glass would absorb the electric field while allowing you to stepup the em field.
I just started watching all your videos. Great job, I would love to build a flywheel like that. How much are you selling the V magnets for? When are you going to try to levitate limestone like ED did. What happens when a reals coil is put in the middle of the flywheel?
The device should be made in steps with a smaller model. (1) Make a wheel with max electrical output. (2) Make an add on device that creates max magnetic field in one direction. (3) Try to magnetize a substance that the device could then levitate.
The part on the pipe in the leedskalnin photo could be a transformer. The white part with the iron wire turned around is the transformer insulation. There is an older picture of the flywheel with a transformer on the left bottom corner with white insulation. The transformer could be used to step down the voltage from the secondary winding in the pipe. goo.gl/oSfFJV
i think there is Gas created near lily ponds ed had, he said he'd observe algae form in water pools... i imagine these formations produce bubble structures.. i imagine the wheel is a algae pool reflection of some kind too
tesla and ed I believe have a connection. electricity and magnetism go hand and hand. I cant imagine that they didn't have a connection. Both men didn't didn't want to give their secrets up unless it would be used for better good. Ed was 2yrs younger than tesla, lived just about 100mi from one another and both came to U.S. Maybe when Tesla discovered time travel he went back and taught Ed or was Ed.
you need to put a 6 volt solenoid by the wheel where the cut out was in the wood where his was. he used a 6 volt generator to power it . get a 6 volt car battery . to power the wheel to make the wheel to turn. he would have used compass to test the magnetic field around the area. put one two feet away then one at 15 feet away to test your magnetic field and go out from there.... you have to have power to push the wheel. what you see that you are calling a motor is not a motor it`s his generator. being I`m very old I know this. the ring at top is to help in the magnetic vortex. I can help you keep going in the right way. do this then I will tell you more . I know how it worked.
your timing about the patent is off. magnetic current was published in 1945 where he states that he had already applied for the patent and was waiting for approval. he had moved the castle before this. id give my right arm for a peeek at that patent.
maybe the story about sweet 16 could be a contrived one concerning the attackers that went to his place of stay and roughed ed up as you say.....bc ed had to protect sweet 16 and keep fresh boys away or as he said in other text areas.....other males should think it not respectable to be around my girl, and i theirs...
"Lower forms of life are guided by instincts alone so the present only comes into consideration. As soon as the other male is chased away, the female is as good as she ever was, but with us it is different. We are guided more by reason and thought than by instinct and so the present, past and future come into consideration. Now, if it is not good today, it was not good yesterday and it won't be good tomorrow. That is why an experienced girl cannot be one hundred per cent sweet." edward Leedskalnin A Book In Every Home
What is the goal of the device? Is your goal to make a generator, a free energy device or a levitation device? The magnets are not going to be able to drive the device because of equilibrium. It seems you are trying to make a huge generator that would create a huge magnetic field which would be able to levitate coral. Interesting attempt but it seems you are going about it wrong. The device is too big, too costly and too time consuming to experiment with. This could be the finished design. You need to start with a smaller replica that can be easily altered and tested to get maximum output. You're going to build a huge contraption and each subsequent alteration is going to take months to complete.
![TREASURE - 'KING KONG' COMEBACK SPECIAL [THE TREASURE SHOW]](http://i.ytimg.com/vi/Jx1wyMaQzf0/mqdefault.jpg)
I'm very much looking forward to your next video.
I watch all your videos. I can't wait to see it running.Thanks for your efforts.
the white insulation on top the magnets and underneath the ring gear is almost certainly asbestos, which I seem to remember removing from old transformers I took apart as a kid - probably similar to or same as asbestos tape and paste that plumbers used for thermal insulation before it was banned . . . it must have had good electrical resistance too (most thermal insulators do). The jar is almost certainly a capacitor, the earliest form of which was the Leyden Jar (1800's) - a glass container (dielectric material, an insulator or actually low semi-conductor) with metal foil (silver, originally) wrapped outside as the ground and inside as the other terminal (originally they had water inside, and later ones used vinegar or other electrolytic acid to form a battery, experimenting with different electrode materials - copper, lead, zinc, iron. Also related to electro-plating).
The long coil that you've built for the grounding tube almost certainly goes with the Leydon capacitor to form a resonant coupling connection with ground, and from the apparent size of coil and jar it looks just about right the size for the schumann frequencies at around seven hertz, which can be seen as magneto-inductive waves (spiking) on an oscilloscope.
So . . . yeah, that might be where the "free" energy is coming from and to, oscillating between . . . literally the earth and the heavens, infinity in all directions . . .
looks like the magnetic motor-generator system (i think it's both at the same time) acts as a rectifier of planetary-atmospheric electro-magnetic and magneto-electric oscillations (they're the same thing, but two sides of the energy equation, see Eric Doddard -- still a wee bit over me' head)
There is general agreement now among physicists that the "zero point energy" really does exist, and is enormous (actually the zero point in question has an arbitrary "infinitely small" volume, compared to the size of us - it's a measurement term - and there are power waves passing through in all directions all the time of all different frequencies) . . . the question is how to tap it.
It has been done now with solid state (semi-conductor) electronics at a very low level in the higher frequencies, with arrays of micro-antennas of many different sizes (for different frequencies) arranged in all directions . . . then simply rectify the captured waves! They believe they can charge a cell phone continuously this way some day, the principle works in the lab already (this was in Scientific American, almost ten years ago).
Also, photo-electric effect (solar cells) and Hall sensors are examples of real free energy devices, well developed theoretically and industrially.
There is a rectifier effect, in all these methods, to get useful energy.
That motor . . . rectifies natural electro-magnetism into rotational mechanical energy? then back into electricity again? magnetism ?? let's see, feedback output signal into input to get resonance, and new energy comes in with every collapsing magneto-electric field cycle?? gets passed through motor . . . then dispelled . . . . . . .
I'll need to think about where it gets dispelled to, at a lower available energy level, in this galactic entropy cycle . . . oh yeah . . . . it's all related to the galaxies' spinning electro-magnetic and magneto-electric fields . . . yeah, we'll think about that!
pfm_2014_05_27
Absolutely amazing great work
Like Ed said, 'running one against the other'.
Can't wait to see it in action Vinny.
you never will because this dude is either the biggest troll in history or a nut, he is simply slapping random shit on this thing for no real reason
Hi, the more I look at it, the more it has a lot of similarity with the Albach magnet Array. When assembled in a circle, depending on the start of the array, the magnetic flux if concentrated outside the ring for example just like your rotating machine and no magnet flux inside of the ring - neutral point like you described in one of you video. However, you have one advandage, your coils in the V magnets!
Nice job man, keep going on with this, its a good way
it was an antenna on top of the building. later on it was replaced in some form by a huge iron disk. it is now covered up in concrete. that antenna is how u increase the power of the em field.
setting up the pmh in conjunction with the apparatus is the key. te wooden block that has 2 removable screws is your key to figure it out how to set it up. it MIGHT attach to the pipe coming out of the ground.
Hi, there is more to that picture then what shown in those books. Also that idea on the going spark gap @20:15 needs rethinking. What your suggesting it that the spark gap is hand operated and all that HIGH voltage current he is producing is flowing right through the palm his hand. Keep up the good work on replicating eds magnetic fly wheel.
Ed does have a copper layer around the handle, and I here Joe Bullard say that Ed would were a glove when turning the handle.
i am having difficulty visualizing the mag field around and inside that wheel. It sure would be helpful if you could draw a rough diagram showing the shape of the field. It sounds like it is cone shaped but I am not sure.
But there is also the round sphere's, sitting on top of the inside magnets. I believe that there are 4 .
And the key in the center goes out to the one sphere. That seems to be a spark gap. Of some sort. And the handle released when to much energy was built up. Thanks for posting. Keep them coming
***** Anyone noticed what shape a resonance of 345hz makes?
watch?v=wvJAgrUBF4w
Clover.
Related maybe?
the glass bottle on top of the flange in the pic is an intersting issue. the closest ive come to solving it is that according to eric dollard, the dielectric material is used to reduce electricity from the field without reducing the emism. the opposite would be true if u wanted to increase electricity, i.e. add more magnetic material. if u can visualize in your mind whats going on with the north and south pole magnets, all the metal grounded to the earth is gonna make a huge field. the glass would absorb the electric field while allowing you to stepup the em field.
I just started watching all your videos. Great job, I would love to build a flywheel like that.
How much are you selling the V magnets for?
When are you going to try to levitate limestone like ED did. What happens when a reals coil is put in the middle of the flywheel?
The device should be made in steps with a smaller model. (1) Make a wheel with max electrical output. (2) Make an add on device that creates max magnetic field in one direction. (3) Try to magnetize a substance that the device could then levitate.
just got one question about the picture, why is their a bike
also the concrete was use as an insulator an to help move the motor faster.
Hi there
Is there a better link?
I can't locate that old picture. On the trans former
The part on the pipe in the leedskalnin photo could be a transformer. The white part with the iron wire turned around is the transformer insulation. There is an older picture of the flywheel with a transformer on the left bottom corner with white insulation. The transformer could be used to step down the voltage from the secondary winding in the pipe. goo.gl/oSfFJV
vinnie great work thus far though. id really like to discuss this with u further.
hi vinny was there any signs of gas at the castle,and how close was this wheel to the well.
i think there is Gas created near lily ponds ed had, he said he'd observe algae form in water pools... i imagine these formations produce bubble structures.. i imagine the wheel is a algae pool reflection of some kind too
Donald
Yea the v mags are different
tesla and ed I believe have a connection. electricity and magnetism go hand and hand. I cant imagine that they didn't have a connection. Both men didn't didn't want to give their secrets up unless it would be used for better good. Ed was 2yrs younger than tesla, lived just about 100mi from one another and both came to U.S. Maybe when Tesla discovered time travel he went back and taught Ed or was Ed.
whirlpool, washing machine, not your regular motor
you need to put a 6 volt solenoid by the wheel where the cut out was in the wood where his was. he used a 6 volt generator to power it . get a 6 volt car battery . to power the wheel to make the wheel to turn. he would have used compass to test the magnetic field around the area. put one two feet away then one at 15 feet away to test your magnetic field and go out from there.... you have to have power to push the wheel. what you see that you are calling a motor is not a motor it`s his generator. being I`m very old I know this. the ring at top is to help in the magnetic vortex. I can help you keep going in the right way. do this then I will tell you more . I know how it worked.
Me to
your timing about the patent is off. magnetic current was published in 1945 where he states that he had already applied for the patent and was waiting for approval. he had moved the castle before this. id give my right arm for a peeek at that patent.
This is my email if you want to chat off line
Vinnystvincent@aol.com
If you email me I'll sent you my phone number. Thanks guys
maybe the story about sweet 16 could be a contrived one concerning the attackers that went to his place of stay and roughed ed up as you say.....bc ed had to protect sweet 16 and keep fresh boys away or as he said in other text areas.....other males should think it not respectable to be around my girl, and i theirs...
Tommy Tommy
That's a old video,
"Lower forms of life are guided by instincts alone so the present only comes into consideration. As soon as the other male is chased away, the female is as good as she ever was, but with us it is different. We are guided more by reason and thought than by instinct and so the present, past and future come into consideration. Now, if it is not good today, it was not good yesterday and it won't be good tomorrow. That is why an experienced girl cannot be one hundred per cent sweet." edward Leedskalnin A Book In Every Home
What is the goal of the device? Is your goal to make a generator, a free energy device or a levitation device? The magnets are not going to be able to drive the device because of equilibrium. It seems you are trying to make a huge generator that would create a huge magnetic field which would be able to levitate coral. Interesting attempt but it seems you are going about it wrong. The device is too big, too costly and too time consuming to experiment with. This could be the finished design. You need to start with a smaller replica that can be easily altered and tested to get maximum output. You're going to build a huge contraption and each subsequent alteration is going to take months to complete.