SuperJet Blowsion Standup Pwc Pole Spring

แชร์
ฝัง
  • เผยแพร่เมื่อ 9 ม.ค. 2025

ความคิดเห็น • 12

  • @killedbyaninja1655
    @killedbyaninja1655 ปีที่แล้ว +1

    thanks for the video I was worried how hard it was going to be to change out my spring

    • @CoyoteChris
      @CoyoteChris  ปีที่แล้ว

      It wasn’t to bad, just take your time inserting the bolt. I tighten the main bolt to get some resistance when it’s put together. The springs not strong enough to hold the pole up or at least mine wasn’t.

  • @KDWphotos1
    @KDWphotos1 2 ปีที่แล้ว +1

    Thanks for the video- very helpful!

    • @CoyoteChris
      @CoyoteChris  2 ปีที่แล้ว

      Your welcome, check out the rest of my Superjet videos. Plenty of other mods to see 🤘🏼🔥

  • @PFArecycling92
    @PFArecycling92 3 ปีที่แล้ว +1

    You had it right @ first when it was tighter. The pole is supposed to pretty much hold up by itself almost.

    • @CoyoteChris
      @CoyoteChris  3 ปีที่แล้ว

      Yeah I was wondering it seems like that would help 🤘🏼

    • @WarlockAntaran
      @WarlockAntaran 3 ปีที่แล้ว +1

      @@CoyoteChris the blowsion spring is just junk, riva ones are much better

    • @CoyoteChris
      @CoyoteChris  3 ปีที่แล้ว

      @@WarlockAntaran I haven't tried the Riva one yet. Might just try that next season Thanks for the info.

  • @spscorse
    @spscorse 2 ปีที่แล้ว

    I have the spring on my ski and it stays straight up I don’t ever have to use the locking pin. Problem I have is when you fall the ski lays on it side and won’t upright it’s self any feedback would be greatly appreciated thanks

    • @CoyoteChris
      @CoyoteChris  2 ปีที่แล้ว

      You either have a custom lite weight pole or you have a very rare spring cause I haven’t seen any hold the stock pole up. Only solution I can think of is tighten the pole bolt up where it keeps some tension and won’t move up and down without you moving it.

  • @dustinbuck3113
    @dustinbuck3113 2 ปีที่แล้ว +1

    How did you get the rod back through? I tried it and the new spring was twisting everything so much I couldn't get the far side lined up for the rod to screw back in

    • @CoyoteChris
      @CoyoteChris  2 ปีที่แล้ว

      Nothing to crazy I just pushed everything straight while I used a drill to screw the bolt in. Sorry I didn’t have a better answer.