Thx. Yes it is though it’s designed to work with our own lift kit it’s a great place to start on a DIY adaptation to whatever kit you’re using. Check our website and other videos.
Hello, My name is Calvin, If I was to send you my truck could you put the lift kit and super scale on it? If so how much would you charge? Thx, Calvin Jones I ordered the H Tech lift kit will that work as well?
Hey Calvin. I wish I could but I don’t have any free time. That being said, the lift kit has a bolt by bolt install video. And once you do that, the superscale add on is pretty simple and makes more sense. All in should be a 90 minute job including this add on.
Can I use the dynamic superscale suspension in a stock height CEN F450 with a gooseneck hitch to keep truck from squating down from weight from gooseneck trailer, SCX10 Gladiator and TRX4 high trail k10.
Nope. Not compatible with stock height truck and would still compress at the rear with the extra weight. You need stiffer springs to counter the extra weight.
The steering servo bracket is not part of the anylevel kit. The steering servo bracket comes with our lift kits. Send us an email if you need that part as well. Crawlersncustoms@gmail.com
Yes and no. It relies on mounting points at the front and rear of the truck that only exist as part of the CNC lift kit. That being said you could mix and match the HTech lift cradle with the CNC cradle and then use the servo and panhard set up that comes with then CNC kit to then add the super scale but that’s not very cost effective.
Also, there is a full on SEMA inspired milled billet lift with electroplated mirrored bolt on panels (like the 1:1 trucks use) in the works but it won’t be released until early next year.
theres im pretty sure there 1.9's that are for the redcat gen 7 but they are super swampers you might be able to get them from redcat racing unless your going for a different look idk if they fit right and everything im new to this stuff
I have the lift kit now eagerly waiting for the add on kit to be available.
Is your kit out yet??? I have 70mm lift on my fl f450. I want the whole kit. Genius
Thx. Yes it is though it’s designed to work with our own lift kit it’s a great place to start on a DIY adaptation to whatever kit you’re using. Check our website and other videos.
Love your videos...showing support
Thanks so much
Can u add all upgrades for lift on your next f450 build plz
Where can I get all the parts as a kit for all of it😮
It's cool ~ I'm going to watch the video well ~~^^
Where did you get the screw driver at?
Did you have a reverse any of the servo's?
Yes I believe the firmware I used was reversed front crawler firmware.
Hello,
My name is Calvin, If I was to send you my truck could you put the lift kit and super scale on it? If so how much would you charge?
Thx, Calvin Jones
I ordered the H Tech lift kit will that work as well?
Hey Calvin. I wish I could but I don’t have any free time. That being said, the lift kit has a bolt by bolt install video. And once you do that, the superscale add on is pretty simple and makes more sense. All in should be a 90 minute job including this add on.
Can I use the dynamic superscale suspension in a stock height CEN F450 with a gooseneck hitch to keep truck from squating down from weight from gooseneck trailer, SCX10 Gladiator and TRX4 high trail k10.
Nope. Not compatible with stock height truck and would still compress at the rear with the extra weight. You need stiffer springs to counter the extra weight.
@@crawlersncustoms Thanks.
I didn't get the steering servo bracket
The steering servo bracket is not part of the anylevel kit. The steering servo bracket comes with our lift kits. Send us an email if you need that part as well. Crawlersncustoms@gmail.com
Will that suspension work with the H Tech 40mm metal lift kit as well?
Yes and no. It relies on mounting points at the front and rear of the truck that only exist as part of the CNC lift kit. That being said you could mix and match the HTech lift cradle with the CNC cradle and then use the servo and panhard set up that comes with then CNC kit to then add the super scale but that’s not very cost effective.
Also, there is a full on SEMA inspired milled billet lift with electroplated mirrored bolt on panels (like the 1:1 trucks use) in the works but it won’t be released until early next year.
I recently purchased your lift kit. How much for the add on kit?
Thanks. The add on will be 50-60 once it’s in the store.
May I ask what wheels you are using for this project?
What rims and tires are on your truck
HTech and swampers if I remember correctly.
Check out some of the other videos to catch close ups on this truck.
cool vid but CEN really needs to make a GM body
Hi is dare a smaller lift kit? I FIND IT TO BIG
That's an idea I've had for a while. Stay tuned.
were can i get 1.9 super swampers
theres im pretty sure there 1.9's that are for the redcat gen 7 but they are super swampers you might be able to get them from redcat racing unless your going for a different look idk if they fit right and everything im new to this stuff