Non-Electric Dehydrator - How to Build an Infrared Solar Dryer
ฝัง
- เผยแพร่เมื่อ 9 มิ.ย. 2024
- Preserving garden bounty is an important part of self-reliance. An efficient way to preserve the harvest is by dehydrating food. Electric dehydrators are a great way to go. However, in a true survival scenario, the luxury of electricity may not be available. Our infrared solar dryer is an effective way to dry fruits and vegetables using only the power of the sun.
Why use infrared solar drying to preserve fruits and vegetables? An infrared solar dryer takes advantage of the free energy of the sun. The food is not exposed to sunlight which leads to vitamin loss. It is simple to construct and best of all it does not require electricity to preserve fruits and vegetables.
We have been searching for the right solar dehydrator design and were excited when we came across Tom Bartels’ infrared solar dryer. The design is simple, yet highly effective. We are currently taking a biointensive gardening class from Tom Bartels. You might want to check out Tom’s free video workshop at growfoodwell.lpages.co/gfwspr...
If you are interested in learning more about the training course, Food Gardener’s Video Workshop, Tom is offering a 50% discount and you can find it at growfoodwell.lpages.co/spring...
You can purchase many of the tools and supplies to make this infrared solar dehydrator online from Home Depot at homedepot.sjv.io/YoEjK
Visit The Provident Prepper to read the post this video is based on.
Non-Electric Dehydrator - How to Build an Infrared Solar Dryer
theprovidentprepper.org/non-e...
Other posts that you might be interested in include:
Biointensive Victory Gardens: Higher Yields with Less Work
theprovidentprepper.org/bioin...
Best Strategies for Growing a Reliable Survival Garden
theprovidentprepper.org/best-...
How to Create a Survival Food Forest in Your Own Backyard
theprovidentprepper.org/how-t...
Inexpensive Root Cellars: 13 Literally Cool Ideas to Chill With
theprovidentprepper.org/inexp...
Chillin’ in Our DIY Buried Freezer Root Cellar
theprovidentprepper.org/chill...
Poor Man’s Greenhouse - A Guide to Winter Seed Sowing
theprovidentprepper.org/poor-...
Thanks for being part of the solution! - แนวปฏิบัติและการใช้ชีวิต
I built a solar drier48 years ago. Just a 3'tall x 1,5' x 1.5" box with a door. I made trays with copper screen with wooden frames. To regulate the heat I made a slot in the bottom and top with sliding panels, with both panels adjusted depending on available sun I could control the heat inside the box + or - 20 degrees F. On most fall days the drier would average about 130 degrees with both panels closed. The second year we had temps between 90 and 100 F and the box was cooking not frying the food so I bought a hair drier at a flea market and a small battery operated toy car, salvaging the fan from the hair drier and the motot from the toy car. Then for power I used 2 1" x 1" solar panels and wired them to the motor and the fan. For a drive shaft I used a small length of rubber tubing. My contraption provided enough air flow to keep air moving through the vent panels to maintaini cooler termperatures. We used our solar food drier for many years to supplemet pour family of four. The only material that wasn't repurposed were the llittle solar panels I bought fron Radio Shack for $2.
About 45 years ago we used a old window screen and put it in the rear window of a car. Sure worked real well. Those were the days.
Cut slots in the plastic, then screw it down (but not too tightly). This will allow the plastic to expand and contract but will not buckle. Make sure you use washers with the screws.
You could try drilling over sized holes to allow the polycarbonate room to expand enough to prevent buckling
Making noodles and jerky when I was a kid, we would hang white sheets on the clothes line to dry the noddles and jerky etc.
re the buckling of the polycarbonate, I would just drill the holes in the poly slightly larger than the screws and don't tighten them down as much to allow the poly to move around a bit so it's free to expand and contract.
As always, your video was incredibly informative! I can definitely build this and give it a try. It will be my first attempt with off-grid food preservation. I'm really appreciative of your channel. I think you offer the best advice out there! Please keep it up!
We're nearly finished our new house. When we've finished we will be jumping straight into self sufficient projects. Preserving food will be vital. You folks have a great channel, many thanks, God bless
Fabulous! I’ve wanted a solar dehydrator for ages but they don’t seem to get great reviews. Knowing that an engineer thinks it’s good gives me confidence to try it.
Looks great. I live in the USA but I was born in Sénégal west Africa. Sénégal has the world best mangoes but guess what 60% of the country mangoes is wasted. Too much people don’t know what to do with it. A food dehydrator would be great to show people how to build it and be in business for themselves preserving the mangoes. Thanks
"I like measuring things" Holy crap do my excessive excel logs feel that. awesome video!
Hey guys!! THIS is HUGE!! I absolutely love this idea!! I am going to try this... in Texas. Lol. I'll keep you posted!
Wowow watching this from India and this video is such a useful resource! Thank you muchly!
@@TheProvidentPrepper haha far from it but we'll be fine.
Keep measuring dude! My wife says Im too precise. But she doesnt complain about things built right or centered correctly. Lol
I like it. Just might build this one. Thanks so much.
Oh yeah, THANKS. I had seen a really good design but your vid pushed me to plan on making one.
We would love to see your finished one!! theprovidentprepper.org/contact-us/
Thank you for your "Provident Prepper" resource. I appreciate the concept of self reliance and how to be as prepared for anything down the road. I don't know if you already have experience with storing whole grain corn and then having the resources, grinder, lime, etc. to be able to convert the whole corn into corn flour. I have been just having a blast by making corn tortillas from the freshly ground corn flour to make "masa" and cooking each tortilla on the griddle. I have researched the "nixtamalization" process of using lime to prepare the grain corn for grinding. Whole grain corn is inexpensive, easy to store, quite nutritious, and requires little effort to make a very good food source. Just a thought to add to your great resource. I look forward to learning more from you all.
@@TheProvidentPrepper There are actually a number of You Tube presentations about it, HOWEVER, I feel that your credibility and presentation style as a presenter would carry a lot more interest about the subject. You have a good thing going and following with the Provident Prepper. I would recommend that you and your wife learn about how to take the entire process from "whole grain corn" to making tortillas. I think your viewers would love the message and how you go about presenting it. It is a great food source, easy to do and very provident. You can even use the ash from the fireplace/woodstove as the lime for the nixtamalization process. Very cheap and easy. Just a thought.
Thanks..very impormative
Thank you!
Great design
Luv you both, thanks no sharing, new to all this, want to try and take charge of MY OWN food supply
I like it very much
Get rid of the rubber washer screws and use loosely screwed in pan head screws or roofing nails into one inch slotted holes to allow for expansion and contraction. This method is used when installing vinyl siding which expands and contracts also, the key is to leave fasteners slightly loose. Just look up vinyl siding to see their design. Great idea here, I'll try one this summer.
@@TheProvidentPrepper Well the harvest has been going on for a couple weeks now and I've built one of these babies out of stuff I had around in the wood shed, a couple old storm windows and it works extremely well, I put a couple wheels on one side and a couple handles on the other and it moves around like a wheel barrow. I highly recommend this design and it's certainly a much easier build than some of the others I considered. Nice work, thanks.
Or just put a wood strip all the way around.
I put some herbs on a cookie sheet and set it in the back window shelf of our car. It made the car smell quite nice. Took longer than I thought it should until we went for a short ride. The system needed some air circulation and by the time we got back home the product was totally dried. I need a bigger set up though. gonna check out the other vids. Thanks.
Wow..great..it helps a lot.
Superb 👏👏👏 thanks for sharing
It seems that Tom Bartels adapted the original design by Larisa Walk and Bob Dahse. Excellent!
I've been trying to create something like this for dehydrating beef jerky! This will give be a better idea how I build mine.
@@TheProvidentPrepper In my parents country, they've been dehydrating beef and poultry for years to preserve meats due to no refrigeration. After it's being dehydrated, before consuming, they will either grill it or fry it. So it's fairly safe.
Thanks so much... This inspired me to build one. I dont think you mentioned the purpose of the polycarbonate on top of the tin sheet or maybe I missed it. I presume this is for the greenhouse effect of trapping solar energy in between to help heat up the black side of the tin.
This is wonderful, thank you for taking your time to share this with us. I am wondering where you got the food safe stainless steel mesh? I am having no luck finding it. Thank you again!
I would love to know this too!
on the warped poly , if you will drill just a little larger pilot hole for the gasketed roof screws. Then when setting the screws , leave them just a tad loose. yep , these two items should fix your warping. Why ? think of a house with vinyl siding or vinyl soffit. You can tell when an installer has driven the siding nails to tight to the siding. the nailing slots in the siding allow it to expand and contract , without buckling. Give it a try . really cool design and video. thanks for posting it . Be fun to see how it compares to other , old school sun drying designs .
That's so neat! How long does dehydrated food last?
I wanted to build something like this to indirectly dehydrate some vegetables and your's seems like a great design. I will try to build it and hope it works as well. Thanks from India
@@TheProvidentPrepper It used to be crazy, but we've gotten used to it. The place I'm in , Chennai, has seen a flattening of new COVID cases even after lockdown has been lifted, so the hope is that it'd decline sooner than later. Many other metros are still witnessing a increase, but modest, in number of new cases, but they too feel that the worst has passed. Lockdown is being lifted in a phased manner here in India with media giving them versions like unlock 1.0 :D. Schools and colleges are closed in many states. Public transit is only partially running. Inter district travel is restricted in some high concentration zones. The economy has seen its worst quarter, but the market gurus are predicting that it would have no permanent impact. We're at unlock 5.0 now and it seems like two more months, it would be business as usual.
And it's the beginning of IPL(cricket league), so India has already forgotten about COVID :)
Thanks for asking...
Nice
Very nice! Does this have to be moved in from the rain? Is it possible to make this dual purpose? That is, can it be adapted to work as an active dehydrator, with heat source and fan?
Hi. I f you make this box deeper, you could use it for a growbox for seedling also. Both use the heat and are not always in use.
That is a really great design , simple and efficient . As far as sealing the wood may I suggest beeswax butcher block sealer , it is used to seal butcher block's and coming contact with food. As far as the oil canning that you experience with the polycarbonateI I would suggest mounting the polycarbonate with thin mounting tape And then secure it around the edge with a lightweight angle putting the fasteners through the side, I would apply the polycarbonate In the direct sunlight so it can pre Expand A little bit It will contract when it cools off but probably not enough to come loose from the mountain tape , thanks for posting this And all your other prepping videos
p.s. I am a contractor specializing in bath modifications For the disabled , I take out and throw away Tempered glass shower doors all the time I will not be doing that again lol
I put herbs in a thin cotton/or organza bag and hang until dried. I also use my solar oven but it is really too small to do much. I have been known to use my car and use the dehydrator tray placed on top of a dark cookie sheet. Mostly I use my electric dehydrator as we are on solar. Turn off the machine at night and turn it back on when the sun is shining.
@@TheProvidentPrepper I want my honey to make me one just like yours!!!
interesting. Thank you.
Two questions please:
Do you worry about small bugs getting in? I assume that it is not 100% tight.
What if I want to dehydrate at less than 115 degrees? To keep food raw. Also herbs should not be dried at more than 95 degrees. Is there any way at all to modulate the temp?
In 2022 that’s $7,924 in lumber. Thank you for the great info and explaining so much! I like This design a lot. How could this be used to turn a purée (super hot pepper) into powder?
Insted of plastic on top could one use glass?? would it heat up the same? And great video
I live in Florida. Will the humidity in the air be too much for the solar dehydrator to successful dry fruits and veggies?
Pretty nice build good job but I have a challenge for u try to make a similar dehydrator that can dehydrate liquids to make things like egg and milk powder
You rock
Thank you, if a sudden storm comes up, does it get wet inside?
wich is better use plastic with black both side vs aluminium black top side and raw color bottom side?
You need to make slot for the screw like they have on vinyl siding. That will solve your buckling problem. We use the wood stove heat in the winter . In the summer I run a 12v fan and pull hot dry air from the attic. I know its electricity but its at least run by solar and helps cool the attic and dehydrates food. Fixing to set up a closet and vent the attic into it to dry clothes or take suction for the drier from the attic.
Also did you use it in the fall? What is the coldest temps you have used it with? Thank you.
New subscriber. "Sun light will degrade some of the more vital vitamins". Kindly specify which vitamins besides C
This is really great. I'm definitely going to make a couple of these! This is going to be a great addition! Looks like you have been giving this a good trial run by the variety of stuff you had pictures of, so I have a question for you since your old pros now 😁👍🏻. Could you make the metal screen into removable trays that rest in a rack rather than them being fixed? Or do you think this would hinder part of the process? I'm thinking router a slot on the inner 2x2s and making a screened rack that slips int into that groove? I know that complicates the project and you wanted to demonstrate how simple this project can be so anyone of any skill level can try this. I was looking at your beautiful chives thinking that being able to dump a tray on a pan would be nice. (How long did it take to pick those all out?) I enjoyed this project video! You did a really nice job Jonathan! I'm impressed! You two make a pretty dynamic duo!
The Provident Prepper I'm itching to build one of these now! If I wasn't in the process of building my raised beds I would be starting one of these asap! I'm getting closer with the garden so maybe I could switch gears and try this out in a week or two. (Would be nice to work on a project in the garage for a bit, I'm afraid I may need a blood transfusion soon if I keep working outside! The mosquitos, sand flies, and wood ticks are terrible this year!!!! 😂😂😤 and the bulldogs and deer flies are about to start up😵) This project really is a fantastic addition to anyone's tool kit!
How about using latches on four sides instead of fixed hinges
The solution to the plastic bowing is to float it between a wood frame so that it can move freely in the floating frame.
you should try torch burning the wood to act as a preservative and helps keep bugs away
Is it possible to use an aluminum or steel sheet instead of tin? Or a diffent kind of metal?
Stainless steel screen is hard to find. What else can be used?
I want to make one for my mom. Does it have to be see through plastic on lid? Or can i make the lid aluminum on top and bottom?
I'm sure you aleady figured this out but velcro to hold down the plexiglass would work fine. I mean you don't need it structural, it just needs to not come off, right?
I'm a bit late in answering this, but a cover strip might help in stopping the warping problem...
Curious, you mentioned building 5 more of these. Are they still working out ok, did you change anything else? I'm currently building one out of steel so it won't ever rott.
does this work for apples? and if so how long do the apples last?
Thank you for your step by step informative video. My question is about the need for the plastic sheet on top of the lid over the black painted sheet. I am guessing that it creates a consistent heat? How much of a difference temperature wise would it make WITHOUT it?
Sorry for the late reply. The plastic over the black painted sheet is important. It creates a greenhouse effect that traps the heat (similar to your car in the hot sun with the windows up) and drives it down into the dryer. To some extent it also creates more consistent heat. Great question...thanks for being part of the solution!!
The sunlight shines through the clear cover and the black metal converts light energy into infrared radiation which radiates onto the food below.
This dehydrator looks perfect for what I want to accomplish, can I ask what purpose the poly plastic sheet on top serves?
Hi Sydnee...the polycarbonate serves a couple of functions. First, it protects the black painted surface on the absorption plate from collecting dirt, and especially rain and other water. Second, it acts like a greenhouse to trap heat and drive it into the dehydrating bins, substantially increasing the heat. Great questions...thanks for being part of the solution!
Why not route oblong slots in the polycarbonate sheet so the panel almost floats on top? You may need to sandwich the panel between two pieces of wood and not tighten it down super tight to allow for expansion and contraction.
Would glass work better than polycarbonate i only ask because I just replaced an old single pane picture window
Could you please link who you are referencing at 8:46
can I use aluminum instead of tin? since aluminum is a better conductor than tin
The link for Tom’s free video workshop isn't working
I made Solar dryer and seen 8 degree celcius difference with ambient temp at 9 AM cloudy weather but seen moisture on poly carbonated sheet , Its common or need modification
Thank you.
If you take the stews out of the two ends and top and put a wood outside corner on without going through the plastic it can expand and contract without the flexing
How long has your drying time been?
I thought airflow was necessary? How many days does drying take with this design?
The airflow is underneath the drying tray screen. Cool air flows in at the low end between the screen and corrugated roofing iron below, and the hot air heated by the solar collector flows up and out at the higher end. Thermal syphoning.
I dry a lot of herbs around the house by just putting them up high for a few weeks. I use the racks from my electric dehydrator. They stay out of the sunlight and I don't use any electricity.
Any patent yet, whats the price or shop site?
Thanks for detailed video .can we use uv ptotected sheet tarpolene or 3mm glass because polycarbonate will create gases due to sunlight heat. Your design looks like commercial branded product .👍👍👍👍👍
Can we use glass ?
Interesting, I'm not sure about that pollycarb* plastic top, I'd go with stainless steel but very nice design. thank you for taking the time and sharing.
You've missed the point here which may not have been explained. Sunlight passes through the the polycarbonate (or glass) and hits the black flat metal. The sunlight is converted into infrared heat which radiates down onto the food below.
The polycarbonate cover keeps heat inside the solar collector. The metal sheet protects the food from UV light which denatures nutrients.
@@rubygray7749 indeed I get it all. It's the chemical compound of everything this is my issue.
Awesome IDEA,, will get me some wood and build me one ASAP.. Keep up the Awesome Videos Jones's
One more thing maybe it should have a screen on the top and bottom of the metal roofing so bugs can’t get in under the trays
How the mousture will escape?
Do you have to use plastic poly carbonate the reason I wanted this is cause I don't trust the plastic food dehydrators
Does the painted side of the tin face up toward the sky or down toward the ground?. Thank you for sharing this. I have been wondering how to dry veggies outside while keeping Insects and curious animals away.
You just answered my question. The painted side faces the sun NOT the food. Thanks!
What about air holes?
Do you not need them for moisture to escape and inflow? 💚
There is airflow from the bottom!
Is this hot enough to dehydrate meats ?
Maybe fill the polycarbonate gap with a high heat food grade silicone? Too much offgassing? I really don't know.
Why do you need the Polycarbonat on top of the black tin sheath????
Is it to keep the tin clean and protect it against water?
Couldn't you just use the tin sheath as lid?
Thank you for your answer.
To keep the heat in for green house effect.
how about plexiglass instead of polycarbonate?
How did the thermometer break? Too hot or just dropped?
@@TheProvidentPrepper I'm trying to figure out if some thermometers can't be used when it is too hot.
I only grow herbs, so I use twine, cheesecloth, and such to dry my herbs. I like your design, but I read you can dry things on the dashboard of your car, like if you (like me) have not built anything like this. I would cover food with cheesecloth even in a car, and I saw where someone said you can crack the window to mitigate the heat inside in your car and help with airflow in there.
Would this work when there is high humidity??
Great question.. was thinking about this but don't think the UK would be a good place for it!
Maybe you could stake the screws out and then put 2x2s on top then screw it together. That way you it would be clamping down so it couldn't warp and bow the polycarbonate. Also maybe try making black walnut stain from the hulls. It should be non toxic.
You can also use the walnut stain on metal. Some people stain their foot traps in it. I tried it on a hatch head I rehandled but I had to boil it in the stain to get a good coat or bluing I guess you would call it.
Wats d thickness of steel sheet used ??? Upto wat thickness we can use??
@@TheProvidentPrepper Sir i m still waiting for reply coz i have steel sheets range of 0.1 to 0.5 mm left spare from my previous job...hence i wud like to use them in this project...so kindly let me know if i can use that thickness.
I used 20 guage tin, which is just about a millimeter thick. You could go a bit thicker if you want, but it would add some weight, and would take a little bit longer to heat up. On the other hand, the extra mass will hold heat a bit longer once heated. Because I move ours around a bit, I would probably not go any thicker than 14 guage. I will be interested in what you end up doing! Thanks for being part of the solution!!
@@JonathanBJones thank you Sir seems i need to gona buy a new sheet but still i am gona giv it a try.
Can i dehydrate meat in this?
Now you need to sale us these
Pardon my ignorance but infrared are the rays that we can't see. What does that have to do with this dehydrator? Isn't the HEAT from the sun's rays doing the dehydrating? If possible, would you please explain what makes this an IR dehydrator.
The sunlight shines through the clear top (polycarbonate or glass) which prevents heat kiss.
The black metal sheet converts light energy into infrared, which is the heat that radiates down onto the food below.
Direct sunlight on food is bad. It destroys nutrients and bleaches foods.
Why choose tin over something like aluminum with conductivity of about 4X that of tin for example? (k_tin = 62.2 - 68.2 vs. k_aluminum = 236-240) Seems like thermal conductivity would be the method of converting sunlight into infrared wavelengths? Curious if I missed something before I go build one. Cost prohibitive? Sorry, engineer here too.
Thermal resistance(1/conductivity) of sheet is negligible here compared to compared to resistance of radiation. Actually you can use paper, fabric, thin plastic instead of metal here without loosing much efficiency
@@ilyaglar wich is better use plastic with black both side vs aluminium black top side and raw bottom side?
@@udincak3117 u need no know emissivity of raw aluminium, I don't remember but it is good if it is not polished. And aluminium is better structurally.
@@ilyaglar max emissivity very low about 0.2 (heavy oxidized) and structurally not important in this case
@@udincak3117 well, then plastic would be better. Or you 'll need to paint aluminium. Keep in mind that some plastics degrade quickly in high temperature and sun exposure. I think that painted tin is best solution, but it's your project
My area I have 35'celcius for 10 months. Do you think it would work
That is pretty warm, but I think it will work. The goal is to keep the temperature inside between 120 and 140 degrees F (49 -60 degrees C) so as to preserve nutrients of the herbs, fruits and vegetables. I would use a thermometer probe to see how that goes. If it is too hot, you can turn it out of the direct sun or use a light shade cloth to moderate the temperature. The humidity is also a big factor. This dryer works best in dry climates. Especially in a dry climate, I think it will work well...you may just need to tinker with it to make it work best. Thanks for being part of the Solution!!
@@JonathanBJones thank you
If you make a trim piece to go around the top. It will help keep the edges of plastic from bending. Maybe some wood strips or perhaps some sort of metal L track. Like a picture frame
Your welcome. Great video.
Considering making one with a built in ??° angle top. Trays will lay flat. Back hindged wall will be slightly taller than front entrance wall.
@@TheProvidentPrepper I'll update you once I make it. Have a few projects going but I'm excited to get around to it. Thanks again for the great video.
If you use aluminum for the metal, it will probably get higher temperatures and faster
I assure you, not only ‘’engineers’’ are implicated, interested and do these types of projects. It is so stereotypical of an engineer to always mention and have others mention they are an engineer 🤣 sorry I had to say it … that being said very interesting and well done in your trial and errors to make this thing work as it should ;)
Is this dehydrator working well for you, now that you have had time to try it out? I question the use of aluminum, since aluminum is known to reflect infrared sun radiation. Does the paint somehow negate aluminum’s ability to reflect infrared light? Would it be better perhaps to use aluminum under the screens to reflect the infrared light upwards onto the food and use a dark cloth above to shade the food from ultraviolet radiation which would effect vitamin levels like vitamin c?
Sunlight adds Vitamin D to foods. Why would you NOT want dehydrated foods exposed to sunlight? There are several YT vids of folks making "sun dried" tomatoes in the oven. People around the world have been drying foods in the sun for thousands years. It works!
:D