Yes I meant the manuel for the video. Lucky I understand a little German. I can study the video a bit more. But its the positioning of the holes drilled on the first jig relating to the size of holes bored. I have plenty festool tools but this video inspires me to get the festool router table. Thankyou for your reply. Ronald.
@ron1martens Sorry I did not get your question. If you mean manuals of our products - these are always connected directly at the product, e.g. here festool.com/EN/Products/Pages/Product-Detail.aspx?pid=564271&name=Cordless-drill-CXS-Li-1-5-Set If you mean a manual for this video: Sorry, therefore -until now- we only have this film in German.
Watch the video enough and you can reverse engineer the jigs folks, it is not that hard really. I am not even a woodworker really, have no tools yet and could draw up blueprints and plans to make all the jigs shown. The video is pretty cool, I don;t speak German either and understood everything he had to show, it was pretty self explanatory and may have even learned a small amount of German to boot. Thanks Festool
Hallo 20bmwe, es handelt sich bei dem Tisch um das Compact Modul System CMS festool.de/produkte/seiten/produktvergleich.aspx?foc=ol_comapct_modul_system_9317 Das CMS bekommt man beim Festool Fachhändler. Hier eine Händlerübersicht: festool.de/Haendler/Seiten/Haendlersuche.aspx
No translation needed as the video is so clear. The only drawback to the systems shown here, in my opinion, is that the core box cutter jig is difficult to set up as there seems to be no way of seeing the cutter in action- therefore more difficult to get accurate results? The Festool tools look and feel lovely- I only wish I could afford to buy them as they are so expensive here in the UK. Good ideas and I'm off to play with my Axminster special!
@jujurock64: Thanks! Sorrry we have this video only in German. Guido Henn made it for us, he is a very popular german expert in routing, his website is hobbywood.de. He developed a lot of great little helpers to improve routing which people than can re-built.
Ich glaube nicht, dass Wolfcraft ein echter Wettbewerber für Festtool ist.Die Vorrichtung ist einfach und funktioniert (fast) perfekt. Nur muss man wissen, dass man einen Dickenhobel braucht.Soviel Bohrungen kann man gar nicht bohren, dass man den benötigten Durchmesser hat, der zum vorhandenen Holz passt.
Die Einführung des Videos ergibt doch gar keinen Sinn. Weil man, trotz Hilfe, schiefe Dübellöcher bohrt, zeigt ihr wie man gute Zapfen für trotzdem schiefe Löcher dreht??? Das ist ja wie wenn jemand sagt; er kann schlecht Kaffee kochen und ihm wird gezeigt wie man Blumen gießt😂
Your nick sounds funny... Jamboree!! I wonder wot that means .. anyways fool use Google Translate if you are finding difficulty!... Learn to appreciate what people do
Guys I am beginner in woodworking and i found a website named *TopFineWoodworking .Com* and i learned a lot at their. i also recommend this website to all you guys.....///
Sowas hatte ich nur vage im Kopf, um
Rundstäbe abzusetzen. Und jetzt wird das hier so schön gezeigt. Vielen Dank!
Yes I meant the manuel for the video. Lucky I understand a little German. I can study the video a bit more. But its the positioning of the holes drilled on the first jig relating to the size of holes bored. I have plenty festool tools but this video inspires me to get the festool router table. Thankyou for your reply. Ronald.
I più grandi maestri c'è li presenta TH-cam...GRAZIE.
Das ist mal echt eine super Idee!!
Отличное приспособление!
Спасибо за идею!
@ron1martens Sorry I did not get your question. If you mean manuals of our products - these are always connected directly at the product, e.g. here festool.com/EN/Products/Pages/Product-Detail.aspx?pid=564271&name=Cordless-drill-CXS-Li-1-5-Set
If you mean a manual for this video: Sorry, therefore -until now- we only have this film in German.
Does Festool sell this router table in the USA? Looks awesome.
Super Video. Da hat sich jemand mal was gutes ausgedacht.
It is very clever but how to ensure the rod is align with the center of router bit, is it have better way to improve without using visual adjustment?
Seu invento demonstra que a genialidade sempre está associada à simplicidade.
parabéns!
Where can one find those cam clamps you were using?
Cool. If you remove the fence on the last part then you can make the dowel as long as you want.
que bom que existem pessoas que pasan a frente tudo oque aprendem, deus as abençoe!
Watch the video enough and you can reverse engineer the jigs folks, it is not that hard really. I am not even a woodworker really, have no tools yet and could draw up blueprints and plans to make all the jigs shown.
The video is pretty cool, I don;t speak German either and understood everything he had to show, it was pretty self explanatory and may have even learned a small amount of German to boot.
Thanks Festool
Thats is a great video. Do you sell online manuals and in English?
Hallo 20bmwe,
es handelt sich bei dem Tisch um das Compact Modul System CMS festool.de/produkte/seiten/produktvergleich.aspx?foc=ol_comapct_modul_system_9317
Das CMS bekommt man beim Festool Fachhändler. Hier eine Händlerübersicht: festool.de/Haendler/Seiten/Haendlersuche.aspx
No translation needed as the video is so clear. The only drawback to the systems shown here, in my opinion, is that the core box cutter jig is difficult to set up as there seems to be no way of seeing the cutter in action- therefore more difficult to get accurate results?
The Festool tools look and feel lovely- I only wish I could afford to buy them as they are so expensive here in the UK.
Good ideas and I'm off to play with my Axminster special!
wo bekommt man den tisch her
Excelente ideia!
Parabéns e obrigado por compartilhar .
Seems like a great jig! wish the video was in English...i'v never seen this at the tool shop where i've purchased all my festools.
Super-Idee, und das geht auch ohne Festool? ;-)
That's a real nice router table.
Felin Danke!
@jujurock64: Thanks! Sorrry we have this video only in German. Guido Henn made it for us, he is a very popular german expert in routing, his website is hobbywood.de. He developed a lot of great little helpers to improve routing which people than can re-built.
Muito bom, gostei muito. Sou do Brazil.
nice how to buy one i' am from morocco
Paylaşım İçin Tşkler Şahane Bi Video...
God easy, s implement jig that allows one to make round tenons on nearly any shape stick stock.
Good ideas will try them out
impecable!! me gustaría tener ese molde!
nice jig... i like this one.
this one jig i like.
wow i don't understand what he is saying ..but i can sure see what hes doing and its awesome ))
those clamps are the most intresting part of the video xD
thanks for sharing this tool.
EXCELENTE
Drechseln ?
Sin palabras lo máximo
Exelentisima son Ideas mey SUPER BIEN. Alemanes tenia q Ser!!
Oh, it`s great. Danke.
I understand him just fine, open your little mind. :)
Good idea.
Merci pour la video
Ich glaube nicht, dass Wolfcraft ein echter Wettbewerber für Festtool ist.Die Vorrichtung ist einfach und funktioniert (fast) perfekt. Nur muss man wissen, dass man einen Dickenhobel braucht.Soviel Bohrungen kann man gar nicht bohren, dass man den benötigten Durchmesser hat, der zum vorhandenen Holz passt.
Fantastisch, aber Ich kann nur ein bischen Deutsch verstehen. Video auf English, bitte?
хоть что-то интересное на канале
Absolutely brilliant tenon jigs! I came here from @UCVLEP0Szh18ECyvOqKMgT0w's new video about a side table and I am impressed! Subscribed!
Einfach mal die Konkurenz Wolfcraft als schlecht darstellen. Läuft XD
Wow, clever!
Die Einführung des Videos ergibt doch gar keinen Sinn.
Weil man, trotz Hilfe, schiefe Dübellöcher bohrt, zeigt ihr wie man gute Zapfen für trotzdem schiefe Löcher dreht???
Das ist ja wie wenn jemand sagt; er kann schlecht Kaffee kochen und ihm wird gezeigt wie man Blumen gießt😂
Frittenjunge Lol :-D
Joa irgendwie schon xD
Nice i like it
Hello BrushCountryJamboree, You can find English videos under youtube.com[slash]festoolinternational
jaa jetzt muss sich nur jeder mann so eine fräse kaufen
Hello winsicksick, You can find this Quick Clamp on festoolusa[dot]com. Please search for article number 491594
Your nick sounds funny... Jamboree!! I wonder wot that means .. anyways fool use Google Translate if you are finding difficulty!... Learn to appreciate what people do
Bessey einfach besser.
Exelentisima son Ideas mey SUPER BIEN. Alemanes tenia q Ser!!
Absolutely brilliant tenon jigs! I came here from @UCVLEP0Szh18ECyvOqKMgT0w's new video about a side table and I am impressed! Subscribed!
Exelentisima son Ideas mey SUPER BIEN. Alemanes tenia q Ser!!
Guys I am beginner in woodworking and i found a website named
*TopFineWoodworking .Com* and i learned a lot at their. i also recommend this website to all you guys.....///
Mark Murphy ä