Looks great. btw I was thinking that it may be neat if you made a endo skeleton to put the spring trap suit on. if you make it adjustable you may be able to pose it in the corner of the room and if it doesn't work out you'll have a pretty neat coat rack i suppose
What a beauty! I love how you made them very bendy, I feel like that's one of the best aspects of the Puppet's design that usually gets overlooked by some folks, usually SFM animators.
its great! my only recommendation is to add multiple coats of each colour paint, it takes longer but in the end it makes it much nicer when there arent any spots where the paint is thinner. but who knows you might have a reason why you dont
i 3d printed this had to make it a bit smaller but how to build the arms and legs Edit:ok I’m dumb I didn’t listen properly for the arms and legs can I just have the old model for the arms and legs please?
How was your experience using the rotary tool on the print? Im thinking of getting one as well to sand small prints and fixing small details but im not sure if it will melt the plastic easily
I recommend using it on lower speeds and moving it around a lot. This stops it from melting the print. Also when in comes to small and detailed parts I wouldn’t recommend it. It work’s better for large surfaces. Well at least from my small usage of it
Your Animatronics look so realistic! I hope that you do all the other "smaller" Animatronics and maybe even Vanny's Mask from The Curse of Dreadbear DLC :)
Bro made a bdsm puppet, nah I'm just messin with ya, I opted to paint my mask by hand and make the mask using dry clay. I also bought some velvet fabric from the store to make the body and appendages. Also those weird things on the arms and legs are ribbons, you could've just bought a roll and cut some out and either sewed them or hot glued them
It looks awesome! Your FNAF 3D prints are always beautiful and creative. I have an idea for you, I would love to see an Ennard mask 3D printed! Ennard has a very complicated wires all over his body which is why I think just the mask would look great! It would also be neat if it were able to open from the middle and lower jaws.
This is amazing! could you do Toy Chica id do it myself but I don't know how to get the model. Thanks for putting the mask up on thingiverse btw I have printed it and its nice.
I plan on attempting to Print a full size toy chica standing at 6'4 but I'm not too sure how to do this obviously it would be great if you could do it but I understand that is too much to ask for any tips on how I can do this though? software general tips etc
![โรงเรียนห้ามรัก โดนจับได้ตาย...!! [เอิร์นไดเม่]](http://i.ytimg.com/vi/4u02Sbr556Q/mqdefault.jpg)
Looks great. btw I was thinking that it may be neat if you made a endo skeleton to put the spring trap suit on. if you make it adjustable you may be able to pose it in the corner of the room and if it doesn't work out you'll have a pretty neat coat rack i suppose
Thats just Springtrap inevitably living up to its name, a spring trap. I prefer not having FNAF in real life, thank you very much.
COAT RACK
Coat rack lol
thats a good idea!
@@cide5 he does are you dumb?
What a beauty! I love how you made them very bendy, I feel like that's one of the best aspects of the Puppet's design that usually gets overlooked by some folks, usually SFM animators.
Awesome build, I don't think I'll make the full thing, but I printed the mask.
its great! my only recommendation is to add multiple coats of each colour paint, it takes longer but in the end it makes it much nicer when there arent any spots where the paint is thinner. but who knows you might have a reason why you dont
Maybe it's done on purpose to make the mask feel old and worn out?
i 3d printed this had to make it a bit smaller but how to build the arms and legs
Edit:ok I’m dumb I didn’t listen properly for the arms and legs can I just have the old model for the arms and legs please?
I can’t believe this guy only has 3800 subs. This is quality content keep up the good work! 👍
marionette looks amazing, and btw your creations are awesome!! keep up the amazing work!
The Marionette is very creepy, but this is way more creepy! Keep up the hard work!
Perfect! Other than the iconic, wavy, fingers-
2:55 That spider really just said, "hi"
How was your experience using the rotary tool on the print? Im thinking of getting one as well to sand small prints and fixing small details but im not sure if it will melt the plastic easily
I recommend using it on lower speeds and moving it around a lot. This stops it from melting the print.
Also when in comes to small and detailed parts I wouldn’t recommend it. It work’s better for large surfaces.
Well at least from my small usage of it
@@JackTim All right, thanks for the tip man, the puppet looks great btw
the puppet was one of my favourite fnaf characters and I like this
Hey is that 3D printed or did you bought it in a store bc I want to make the puppet so tell me pls
Great! Just one rule.
*don’t forget to wind that music box.*
This is so cool! I'd love to see you do the card holder in FNAF security breach if you have time! :))
Map Bot?
@@Kenokimi02 probably
Your Animatronics look so realistic! I hope that you do all the other "smaller" Animatronics and maybe even Vanny's Mask from The Curse of Dreadbear DLC :)
What program did you use to design the models? thankyou big fan of your work!
I use blender
Can im have a question? How many it cost to make a suit like springtrap one you did in last vids?
Around $300
@@JackTim ok thanks
Nice. But what about the fingers?
what paint do you use?
just a generic acrylic paint
@@JackTim thnx
Looks awesome, Why don't you make a DIY balloon boy? I think it would look great
looks amazing
Cool! At Least I Know What My Next Nightmare Is!!
do you 3d print pre-made models or do you model them yourself?
I make all of my models
What type of coloring material/paint did you use?
nothing special, just some generic acrylic paints
you are way too underated this is peak content
Bro made a bdsm puppet, nah I'm just messin with ya, I opted to paint my mask by hand and make the mask using dry clay. I also bought some velvet fabric from the store to make the body and appendages.
Also those weird things on the arms and legs are ribbons, you could've just bought a roll and cut some out and either sewed them or hot glued them
It looks awesome! Your FNAF 3D prints are always beautiful and creative. I have an idea for you, I would love to see an Ennard mask 3D printed! Ennard has a very complicated wires all over his body which is why I think just the mask would look great! It would also be neat if it were able to open from the middle and lower jaws.
I felt ashamed when I realized I was not subscribed 😔 but now I am 😎👍
what 3D Printer do you use for these? I would love to try and make some of my own!
I use the CR-10
@@JackTim hi
Hi
@@JackTim have you seen my channel before by any chance?
Subbed before this channel blows up
mario hit the gym recently
he buff
THIS IS SO COOL keep doing what ur doing
This was awesome! Can you make a Minireena next?
Wow I want one so bad! You are so talented :0
I have a good idea you should make a freddle that would be so cool
cool! just remember, keep her music box wound up!
You forgot the Marionnette's fingers
you should put a layer of resin or clear polish to give it a glosy look
dude how. this is amazing!!
I suggest you do a Lefty suit
soooo cool that looks sooo hard
Is this something you do on a daily basis
Could you possibly make a Robert Pattinson Batman mask. I have a Ender 3 so it’s not big so maybe a in a few pieces? God bless.
Hey hey guy you forgot to make the fingers for the puppet
The puppet of three fingers you forgot about that
i have that exact same techdeck skateboard thats on your desk
Maybe you should make the Freddles next, I think it would be cool.
this is freakishly good are u henry?
Tooooo that is ganna bring life
Looks good to make a Life size fnaf rp in your house
Yo, you should do the fredlings from fnaf 4
You can tell that he gets nightmates at night sometimes cuz of all his 3d printed animatronics
What 3d printer do you use?
CR-10
Could you make a replica of Lionel the lion from circus playhouse next from the animatronic band
it's super cool but you forgot the hands!
I couldn’t find a way to make them look good
Looks great but the fingers on the puppet were forgotten
you should make life size lefty
Yes and make it so you can put the puppet inside of it
oh HELL Nah, Imagine waking up with all these around you
Cool build, but why doesn't it have fingers?
Couldn’t find a way for them to look good
Your always the goat with this
How do you only have 2k subs this content is amazing!
I wanna do this but I don't a 3D printer
Stuff the puppet into the springtrap suit
Lefty but Springtrap???
This is amazing! could you do Toy Chica id do it myself but I don't know how to get the model. Thanks for putting the mask up on thingiverse btw I have printed it and its nice.
I plan on attempting to Print a full size toy chica standing at 6'4 but I'm not too sure how to do this obviously it would be great if you could do it but I understand that is too much to ask for any tips on how I can do this though? software general tips etc
Wow that is amazing. Way to go superstar!
If you put the eyes, cheeks a bit lower and make the eyes a bit bigger then it will look a bit more realistic
would be really cool if I could buy this
Hey maybe should 3-D print bonbon from FNAF sister location or maybe a mini Rena
Please make another costume, I wanna see withered foxy or toy bonnie!
I like how he has chica’s cupcake as a trashcan
I love your videos 😁
The purple mask behind the slaughter D:
yay new punching bag
It looks great but you forgot the hands
*starts singing notion*
Where are the hands of the puppet
you should make nightmare bb next
Sorry um I'm not the one to complain but where are the fingers besides that its pretty good
I actually like Merionethtte and it also looks realistic
THE HANDS DUDE THE HANDS
Idea:Make a Freddy mask like in fnaf 2
Looks good, but just wanted to tell you that you forgot the fingers
hey dude could you make a 3d printed Funtime Freddy suit? so bon bon could connect to the hand
What is this fabric
WOAH THIS IS COOL
You should make Monty from fnaf SB
How that’s inpossible how is it so good
Looks good
I Like it!✨
Yes very good
Can you make Funtime Freddy? Also you need more support because your art is Really good.
imagine you see that in the middle of the night
Can you sort of make foxy?
But @ problem it can’t fly or it’s not robotic
So cool
Where are the fingers???
!!nice video!!
Man you blew up lol last time you were at 200 subs
It would be funny if you made fredbear reason it will be funny because you see a kid you grab the suit then WAS THAT THE BITE OF 87
Can you make a silver eyes graphic novel spring bonnie head?