Man this is a excellent explaination, thank you very much!!!!
ปีที่แล้ว
Hi milen, thank you for your useful videos. I have one follow up question to this video. Is it irrelevant how we connect the pins on the sensors, or do they have designated phase and zero?
Thankyou so much for all the info and guide!! I have 3 of these machines, two of them work fine, and one of them is in shortcut after some smoke went out the resistence pole, do I have any chance of repairing it?? thanks in advance
In this model of Saeco, with this type of boiler \ aluminum, it is very common the problem of burning the heater / it is obviously rather poor! The same model is also produced with a stainless steel water heater and a spiral heater that hangs inside and has no problem! Recognizing, at first glance, the type of boiler is that the grate bottom of the aluminum is attached to it with two screws side by side, and to the stainless one with a single waist in the middle!
Здравей, евала за клиповете! Имам 2 такива кафемашини, едната като пусне кафе, почти винаги на дъното на чашата има не знам как да го опиша, но да речем плюе нещо като кал от кафе, имаш ли идея защо така? Между другото ще е много полезно ако направиш клип с разглобяване на ръкохватката, поздрави!
Hi Milen, my Sacco Poemia coffee machine suddenly stopped bruing coffee .When i turn the switch to coffee mode hot water comes through the milk frother.Please your help will be highly appreciated,thanks in advance.
does the black saeco poem coffee machine have a timer? if you fill the water tank full and you leave for five minutes, is it possible that if the cup is full then the machine will shut down on its own?
Hello, my Saeco Poemia heats the water but not hot enough, just a little, it's not cold but neither warm and the green light turns on. Could it be the cofee sensor?? Thanks.
Great video. My Poemia has this issue, and I assumed it was something simple like a thermal fuse. Opened mine up and the heating element was cracked, with no continuity between terminals. Very sad day, as I happen to love this little thing and this is the only problem I ever had with it. By the way, do you know if it's possible to replace the heating element (or the whole boiler) on an aluminum boiler with the old style stainless steel boiler?
ปีที่แล้ว
Gaggia viva is successor of the model. Its atound 150e, so you buy new once boiler breaks. Stupid system, but not worth money and trouble repairing it unfortunately.
hey i have same problem.. i start my Saeco Poemia.. the current light is green , but light from coffe is not green and water is cold.. eventually which sensor is to blame ??
Thanks for the video but this Heating element attached to the machine is also broken since it has some black DOT here th-cam.com/video/mdtPvpPp86c/w-d-xo.html When this happens this machine literally pop like a firework once and you know that your Heating element is damaged. I am not sure how this works but maybe it short circuit somewhere above the damaged part of the aluminium. I repair my Saeco today with the same problem and mainly the problem arises when the Water hose is loose or you didn't put teflon tape when you screw the metal brass hose. When it is loosing pressure it creates low pressure point where the water droplet forms and it then drops above the heating element causing it to Pop like a firework. This is intended design by my opinion by Phillips since it is not normal to not protect the heating element from the water. This way they can sell CHEAP coffee machine and then to get more money from the parts. What a world we are living in...
Salve mi puo diré se la macchina in questione e del model lo HD8424, su questa macchina volevo chiedere se la resistenza d'ella caldaia si puo cambiare e dove la posso compraré grazie
Thank you for your explanation. I repaired my machine in 5 min, with your help!
Very helpful. The wiring scheme was different on mine than in the video, nonetheless your video was helpful. Thanks
Благодаря за видеото, много бе полезно. От него разбрах че явно ми е изгорял нагревателя :(.
Excellent videos!. I have a problem with the selector knob. the plastic stick inside the knob broke and dont know how to repair it.
Man this is a excellent explaination, thank you very much!!!!
Hi milen, thank you for your useful videos. I have one follow up question to this video. Is it irrelevant how we connect the pins on the sensors, or do they have designated phase and zero?
Thankyou so much for all the info and guide!! I have 3 of these machines, two of them work fine, and one of them is in shortcut after some smoke went out the resistence pole, do I have any chance of repairing it?? thanks in advance
In this model of Saeco, with this type of boiler \ aluminum, it is very common the problem of burning the heater / it is obviously rather poor! The same model is also produced with a stainless steel water heater and a spiral heater that hangs inside and has no problem! Recognizing, at first glance, the type of boiler is that the grate bottom of the aluminum is attached to it with two screws side by side, and to the stainless one with a single waist in the middle!
yes i have that spiral type, a little smoke went out and now is in shortcut. . . dont know if its repairable. . .
hi great video !!! but i have a question
what ‘s the principal problem when the machine makes coffee but doesn’t make steam? thanks!
Здравей, евала за клиповете! Имам 2 такива кафемашини, едната като пусне кафе, почти винаги на дъното на чашата има не знам как да го опиша, но да речем плюе нещо като кал от кафе, имаш ли идея защо така? Между другото ще е много полезно ако направиш клип с разглобяване на ръкохватката, поздрави!
Hi Milen, my Sacco Poemia coffee machine suddenly stopped bruing coffee .When i turn the switch to coffee mode hot water comes through the milk frother.Please your help will be highly appreciated,thanks in advance.
does the black saeco poem coffee machine have a timer? if you fill the water tank full and you leave for five minutes, is it possible that if the cup is full then the machine will shut down on its own?
Hello, my Saeco Poemia heats the water but not hot enough, just a little, it's not cold but neither warm and the green light turns on. Could it be the cofee sensor?? Thanks.
здравей ? колко би струвала смяната на нагревателя/бойлера?
Great video. My Poemia has this issue, and I assumed it was something simple like a thermal fuse. Opened mine up and the heating element was cracked, with no continuity between terminals. Very sad day, as I happen to love this little thing and this is the only problem I ever had with it. By the way, do you know if it's possible to replace the heating element (or the whole boiler) on an aluminum boiler with the old style stainless steel boiler?
Gaggia viva is successor of the model. Its atound 150e, so you buy new once boiler breaks.
Stupid system, but not worth money and trouble repairing it unfortunately.
@ Yeah, that's what I did, bought the Viva. I'm waiting for it to break in another five years or so in the exact same way.
Здравейте ,откъде мога да намеря такъв сензор?
hey
i have same problem.. i start my Saeco Poemia.. the current light is green , but light from coffe is not green and water is cold..
eventually which sensor is to blame ??
Hi, i remove the wires from the top wereare the 3 green buttons and now is doesntt work
Моята се оказа с изгорял нагревател. Занимаваш ли се с ремонтиране ?
Да занимавам се със ремонт на кафе машини. Имам обява във OLX На този нагревател - www.olx.bg/ad/nagrevatel-saeco-poemia-CID632-ID6QbUw.html
Thanks for the video but this Heating element attached to the machine is also broken since it has some black DOT here th-cam.com/video/mdtPvpPp86c/w-d-xo.html
When this happens this machine literally pop like a firework once and you know that your Heating element is damaged. I am not sure how this works but maybe it short circuit somewhere above the damaged part of the aluminium.
I repair my Saeco today with the same problem and mainly the problem arises when the Water hose is loose or you didn't put teflon tape when you screw the metal brass hose.
When it is loosing pressure it creates low pressure point where the water droplet forms and it then drops above the heating element causing it to Pop like a firework. This is intended design by my opinion by Phillips since it is not normal to not protect the heating element from the water. This way they can sell CHEAP coffee machine and then to get more money from the parts. What a world we are living in...
i change the boiler but now i forget how was the wires
Има ли го някъде на български ?
Who can help me.
Salve mi puo diré se la macchina in questione e del model lo HD8424, su questa macchina volevo chiedere se la resistenza d'ella caldaia si puo cambiare e dove la posso compraré grazie