Very well made and informative video. However looking at everything you went through I feel it would be much easier to bolt the swiveling base to the seat first, then screw down the eight countersunk alen key bolts. Just a thought.
Thanks for watching and commenting! The swivel base weighs an absolute ton and think I would of struggled if I put the base onto the seat first but you never know, it might of worked! Cheers 👍🏻
Hi there. No, there’s no difference in the seat moving backwards or forwards. The only difference is the height. It’s about 3cm higher due to the mechanism but that’s neither here nor there really. Hope this helps 👍🏻
Found this very informative, especially the final 8 bolts , so thank you very much. Do you find yours slightly rock tho , only just done mine tonight so this is just first impression
Hi there. I can’t say that I’ve noticed it rock but that’s not to say it doesn’t. Since fitting it, I’ve had no problems with it. Seems to be a great product. Pretty pricy but makes such a difference. Thanks for watching 👍🏻
Hi there. You can either unclip the seatbelt tensioner underneath or you can extend the cable using a coiled cable that stretches if that makes sense!?
Did you find any movement in the seat especially whilst driving? As already fitted the passenger swivel base and found battery access a bit more fiddly. Thanks again for the video, helpful 👍
Firstly, thanks for watching!! I agree, the battery access is a bit more fiddly. No movement at all. It’s obviously raised it up…30mm I seem to recall but i lowered the seat to minimum on the height adjuster and it’s perfect for me. It great that it’s got a little lever to spin the seat unlike the 4 screw mechanisms like the bench seat.
Well put togeather video very helpfull. Thank you
Very well made and informative video. However looking at everything you went through I feel it would be much easier to bolt the swiveling base to the seat first, then screw down the eight countersunk alen key bolts. Just a thought.
Thanks for watching and commenting! The swivel base weighs an absolute ton and think I would of struggled if I put the base onto the seat first but you never know, it might of worked! Cheers 👍🏻
I'm sure some have found this useful. Well done !
I hope so! Very easy to do but limited Instructions that come with it. Thanks for watching 😉👍🏻
Really helpful video. Thanks.
Thanks for watching!! Hope it helps 😉👍🏻
Great video thx did you do one on the passenger double swivel seat 😁
Unfortunately not, although it was very similar 👍🏻👍🏻
Thanks for the vid, very helpful. Was there any difference when in driving position of the seat going forward as I have little legs 🤦🏼♀️
Hi there. No, there’s no difference in the seat moving backwards or forwards. The only difference is the height. It’s about 3cm higher due to the mechanism but that’s neither here nor there really. Hope this helps 👍🏻
@@bashabushcraft458 thank you
Found this very informative, especially the final 8 bolts , so thank you very much. Do you find yours slightly rock tho , only just done mine tonight so this is just first impression
Hi there. I can’t say that I’ve noticed it rock but that’s not to say it doesn’t. Since fitting it, I’ve had no problems with it. Seems to be a great product. Pretty pricy but makes such a difference. Thanks for watching 👍🏻
Hi. Where did you get armrest for driver seat?
Hey there! The van come out the factory with it on. It’s a pretty standard thing. You can get aftermarket ones to fit too! All the best, Dave
How do you do the passenger side without breaking wires underneath when turning seat
Hi there. You can either unclip the seatbelt tensioner underneath or you can extend the cable using a coiled cable that stretches if that makes sense!?
Did you find any movement in the seat especially whilst driving?
As already fitted the passenger swivel base and found battery access a bit more fiddly. Thanks again for the video, helpful 👍
Firstly, thanks for watching!! I agree, the battery access is a bit more fiddly. No movement at all. It’s obviously raised it up…30mm I seem to recall but i lowered the seat to minimum on the height adjuster and it’s perfect for me. It great that it’s got a little lever to spin the seat unlike the 4 screw mechanisms like the bench seat.