Man you guys have it so easy these days...my team bike was a DeRosa Professional SLX aqua blue 57cm (guess what year form that spec) Campagnola Record C for all the bearing surfaces, but I opted for super record crank arms because I loved old school look, and Modolo Speedy calipers because they were awesome brakes, and matched the white on the logo perfectly. Every teammate had to put together their daily driver. Back in the day it took opening a 3’x5’ Campy tool kit just to start, had to face the head tube top and bottom perfectly parallel and flat, took hours of slow meticulous work. When that was complete, do the same to both sides of the bottom bracket, half day complete, on to the new process of cable routing in a chromoly frame, installing the usual suspects. Next day, building the wheel from scratch!!! Sewups, fun wow, let’s just say the test drive is day three. Worth every second, the moment you mount a work of mechanical art like that is the moment you know what perfection is. Yeah, you kids have it so easy these days😂😎
Absolutely awesome! And not just the bike, which is pretty close to what I believe is my absolute dream bike. But also the music, the camera, the little details like a hexkey getting dropped or an espresso cup being used for the sealant. And of course the packaging flying around :D Thanks a lot for this! Very entertaining and very relaxing.
Quite the build here. As Italian as it gets. Just a stunning machine. Would’ve been nice to get the new Bora Ultra WTOs on here but still, what a machine.
Hello, dear Lucas, I am enjoying your video. I really like the tire pump in the video. I would like to know about the pump.🧐👍Wow very good Your bike building skills are like art.
Fabulous video! I'd love to see the ridable bike. Pedals, power meter, sensors, computer mount and bidon cages? Oh, is the time of build not the perfect time to remove all the factory packing grease from a new chain before installation?
Dear Lukás: Thanks for sharing this amazing dream-build. I have just adquired the same components BUT RIM BRAKES is a mandatory for me. I am committed with the tradicional brakes and for the moment, I will resist to install disc brakes in my bicycles. Please, Lukás, can you tell me which was the FINAL WEIGHT of COLNAGO C64 SUPER RECORD EPS DISC BRAKE ??. Thank U very much in advance. Best regards.
I am currently stuck at where you are at 8:22. No matter what I do I cannot get those plastic covers to go back on.And I see that the wiring connector and wires themselves are starting to show some wear from my struggles. The thick brake hood rubber is making it darned near impossible. Is there a technique? Is there a trick?
I looked up in the dictionary the other day, for the word"perfect", and following the entry it says " Colnago C64 with Campagnolo Super Record EPS components plus BORA WTO wheels"
Sleduji toto video v Koreji. Chtěl jsem vidět video z montáže Campagnolo Super Record eps Disc 12. Bylo to velmi krásné video. Italská kola se dobře hodí k italským kolům a součástem.
I have a C64 Disc mounted with Record 12, Colnago R41 carbon handlebar and SR9 stem, I have also 40 mm handmade carbon disc wheels laced to Yuniper hubs. But, I think that frozen liveries of Colnago are something astonishing. I'm planning to pass to EPS when possible.
Superbe vidéo Luca merci beaucoup je vais monter un V3rs avec un groupe EPS 2x12, est-ce que l'inteface V4 dans le guidon suffit ou il faut intégrer une autre interface ? Merci encore ! ;)
Perfect Italian, I have a C64 same build except direct mount brakes and super zero bars. I dont think road bikes need disc brakes, also massive job to change headset bearings with discs. If its not broken dont fix it stick with rim brakes please
Super video. Prace, co by me asi taky bavila. Takovy maly dotaz. Nestve Vas tenhle servisni stojan na zdi? Me by tedy stval. A pak dve male vytky. Sice nejsem profik jako Vy, ale sahat holyma rukama na brzdove kotouce, to asi neni to prave orechove. Stejne tak to zkracovani predni vidlice flexou na koleni, mel jsem husi kuzi. Asi to mate v ruce, ale stejne. At se dari. Mate krasnou praci.
Děkuji za zpětnou vazbu. Co se týče stojanu, mám i volně stojící a vyměnil jsem ho za tento. Lépe se pod nim uklízí, nepřekáží v prostoru, je estetičtější a je především o poznání stabilnější a pevnější. Já jsem s ním spokojenější. Kotouče. Vždy na ně sahám umytýma rukama, z podstaty věci si udržuju ruce čisté. Takže na cestě se ty kotouče jistě zašpiní více než mou manipulací (prach a olej….). Pěkný den a taky, ať se daří.
Zatím jsem cc01 dával jen na WRL Campy. Ale dírky jsou dost velké, nebo, jsou asi víc servisácky friendly řidítka.. ale určitě to pujde v pohodě. Kdyby cokoliv, stačí se domluvit :)
Mohu se prosim zeptat, zda se tam pro Alaneru take dava ten cerveny plastovy klinek (soucasti origo SR9 predstavce) na vyplneni diry mezi d-krkem vidle a prostorem predstavce nebo to krk Colnaga da bez toho? Moc diky!
Colnago with Campagnolo EPS, life doesn’t get any better than this.
Great build, great mechanic! We all mistakes from time to time so keep it up!
Man you guys have it so easy these days...my team bike was a DeRosa Professional SLX aqua blue 57cm (guess what year form that spec) Campagnola Record C for all the bearing surfaces, but I opted for super record crank arms because I loved old school look, and Modolo Speedy calipers because they were awesome brakes, and matched the white on the logo perfectly. Every teammate had to put together their daily driver. Back in the day it took opening a 3’x5’ Campy tool kit just to start, had to face the head tube top and bottom perfectly parallel and flat, took hours of slow meticulous work. When that was complete, do the same to both sides of the bottom bracket, half day complete, on to the new process of cable routing in a chromoly frame, installing the usual suspects. Next day, building the wheel from scratch!!! Sewups, fun wow, let’s just say the test drive is day three. Worth every second, the moment you mount a work of mechanical art like that is the moment you know what perfection is. Yeah, you kids have it so easy these days😂😎
Absolutely awesome! And not just the bike, which is pretty close to what I believe is my absolute dream bike. But also the music, the camera, the little details like a hexkey getting dropped or an espresso cup being used for the sealant. And of course the packaging flying around :D Thanks a lot for this! Very entertaining and very relaxing.
One of the most beautiful frames I have seen ever...amazing build..Great video!
Coffee looks good. Very nice bike.
Quite the build here. As Italian as it gets. Just a stunning machine. Would’ve been nice to get the new Bora Ultra WTOs on here but still, what a machine.
Krásná práce, opravdu radost pohledět💆🏻♂️ Doufám že se takových videí objeví tady na kanále víc🙏🏼
To mám velkou radost, určitě ano :) Další na řadě je již na cestě z Itálie. Děkujeme
Krása. Ta práce, to kolo, ten kávovar, ten barista 😁, to celkové zpracování videa 👏👏👏👍👍👍
Děkujem! Diki! 🤌🏻🤌🏻😄🙏🏻🙌🏻
Superb build with love and care, Hope you get more client
Thank you 🙏🏻🙃
Perfect build men ❤🎉
Thank Youu 🥹
All class mate, all class. Bravo: beautiful build, and you had me at "what coffee tamper is that...Old campagnolo hub and tamper base:)"
Beautiful bike 😍
Beautiful video
Hello, dear Lucas, I am enjoying your video. I really like the tire pump in the video. I would like to know about the pump.🧐👍Wow very good Your bike building skills are like art.
Fabulous video! I'd love to see the ridable bike. Pedals, power meter, sensors, computer mount and bidon cages? Oh, is the time of build not the perfect time to remove all the factory packing grease from a new chain before installation?
Factory packing grease i remove in warranty service:)
Dear Lukás: Thanks for sharing this amazing dream-build. I have just adquired the same components BUT RIM BRAKES is a mandatory for me. I am committed with the tradicional brakes and for the moment, I will resist to install disc brakes in my bicycles.
Please, Lukás, can you tell me which was the FINAL WEIGHT of COLNAGO C64 SUPER RECORD EPS DISC BRAKE ??. Thank U very much in advance. Best regards.
Tu as une super machine à café j adoreeee le vélo aussi lol😜👍🇫🇷🚴🏻♂️👏
I am currently stuck at where you are at 8:22. No matter what I do I cannot get those plastic covers to go back on.And I see that the wiring connector and wires themselves are starting to show some wear from my struggles. The thick brake hood rubber is making it darned near impossible. Is there a technique? Is there a trick?
I looked up in the dictionary the other day, for the word"perfect", and following the entry it says " Colnago C64 with Campagnolo Super Record EPS components plus BORA WTO wheels"
That is the most beautiful looking, Bad Ass bike I've ever seen and dreamed of..!! My wallet just doesn't match my dreams.. LOL..
Thank you for this.
Sleduji toto video v Koreji. Chtěl jsem vidět video z montáže Campagnolo Super Record eps Disc 12. Bylo to velmi krásné video. Italská kola se dobře hodí k italským kolům a součástem.
Děkuji, to jsem moc rád:)
Superbe vidéo et très explicite car je vais monter un V3Rs et je pourrais m'inspirer de ton montage, merci beaucoup 😀👍
Fell off my chair when you had the grinder out for the fork cut
It's an Italian group that you assembled and i find that fits. Italian Bike italien Group it's perfect
I have a C64 Disc mounted with Record 12, Colnago R41 carbon handlebar and SR9 stem, I have also 40 mm handmade carbon disc wheels laced to Yuniper hubs. But, I think that frozen liveries of Colnago are something astonishing. I'm planning to pass to EPS when possible.
Not sure what else i need to achieve in life anymore if i do own this bike
Super to spojeni s kávou.
Patří to k sobě, je to kultura! :)
Superbe vidéo Luca merci beaucoup je vais monter un V3rs avec un groupe EPS 2x12, est-ce que l'inteface V4 dans le guidon suffit ou il faut intégrer une autre interface ? Merci encore ! ;)
whoever commissioned this work must be very very wealthy... one day i look forward to doing the same!
Victoria arduino completing all italia experience
It's not italian
@@giorgiof8592 lol 🤭
@@fidelisprayudha :)
Perfect Italian, I have a C64 same build except direct mount brakes and super zero bars. I dont think road bikes need disc brakes, also massive job to change headset bearings with discs. If its not broken dont fix it stick with rim brakes please
I agree with you. I have 3 videos with rim in supply:)
What’s up with throwing the boxes on the floor? Dramatic effect?
:D
No campy chain tool? Looks as if the pin was installed from the wrong side and chain backwards? Something maybe is new for 13 spd chain?
New ParkTool CT-3-3 is for 12 speed chain. I use it in this video:)
Cuts carbon fork with Grinder??? No Guide
Why?
@@dosedlalukas It´s not healthy. Hopefully you were wearing a mask.
What coffee tamper is that?
Old campagnolo hub and tamper base:)
did you use the red wedge from the sr9 stem when installing the alanera bars?
Yes Stephen:)
@@dosedlalukas do you have any extra for sale? lol
Nice, do the Campy bottom bracket cups come with the frameset?
No, bb cups buy with campy superrecord)
Bonjour, pouvez-vous me dire par où passe le fil long (repère gris) pour aller à l'interface v4 guidon ? merci
English please 🤌🏻
Beauthy also the color
Super video. Prace, co by me asi taky bavila. Takovy maly dotaz. Nestve Vas tenhle servisni stojan na zdi? Me by tedy stval. A pak dve male vytky. Sice nejsem profik jako Vy, ale sahat holyma rukama na brzdove kotouce, to asi neni to prave orechove. Stejne tak to zkracovani predni vidlice flexou na koleni, mel jsem husi kuzi. Asi to mate v ruce, ale stejne. At se dari. Mate krasnou praci.
Děkuji za zpětnou vazbu. Co se týče stojanu, mám i volně stojící a vyměnil jsem ho za tento. Lépe se pod nim uklízí, nepřekáží v prostoru, je estetičtější a je především o poznání stabilnější a pevnější. Já jsem s ním spokojenější.
Kotouče. Vždy na ně sahám umytýma rukama, z podstaty věci si udržuju ruce čisté. Takže na cestě se ty kotouče jistě zašpiní více než mou manipulací (prach a olej….).
Pěkný den a taky, ať se daří.
Jak protahujete kabely SR EPS přes řidítka CC01, Ty díry jsou malé na konektory ne? jl
Zatím jsem cc01 dával jen na WRL Campy. Ale dírky jsou dost velké, nebo, jsou asi víc servisácky friendly řidítka.. ale určitě to pujde v pohodě. Kdyby cokoliv, stačí se domluvit :)
What is the stem angle on the Alanera?
82° :)
Can I see the detail part list pleSe
Wow!
What is the name of that clock that you have?
Karlsson flip clock
❤️
Mohu se prosim zeptat, zda se tam pro Alaneru take dava ten cerveny plastovy klinek (soucasti origo SR9 predstavce) na vyplneni diry mezi d-krkem vidle a prostorem predstavce nebo to krk Colnaga da bez toho? Moc diky!
Zdravím, určitě se tam dát musí, bez toho se řídítka protáčí. :)
Diky, ja to v tom instalacni videu nevidel. A pak mam pocit, ze to je delsi nez Deda riditka, tak nechapu, jak se to tam vleze:)
Je to přesně, dejte mi mail, mám to nafocené :)
8:43 How does this guy not have a Park Tool saw guide? lol
because the grinder is more accurate and faster. lol
Pal čert nějakou, dneska už docela obsolete, C64, ale to V3RS opřené jen tak o zeď to je skvost, krása a budoucnost... :)
I CAN LIVE WITHOUT MY ESPRESSO MACHINE! I use a super full-auto type. Then tinker with my three bikes.
Hello there,
This is a good video but you have to stop throwing stuff away. It's not compatible with the call format you are trying to produce.
weight?
7502 grams... just read description lol
@@pennetierphilippe8529 lol 😂
👏👏👏👏 ❤️🇮🇹❤️
🤌🏻♥️
Bude nějaké Bianchi?☺️
to bude záležet na lidech, kdo si co objedná :) Pevně doufám, že ano. Nicméně další by mělo býti Pinarello :)
Top😁👍🚴♂️
Thanx! ☕️😄
Why in gods name would u put disk breaks on such a classic gorgeous bike like this. just ruins it. Why industry why!! Nice bike though otherwise 😊😊
You’re right. #savetherimbrakes :)
I had a red and white Colnago back in 84. Sold it before divorce.
👍👏🇫🇷🚴🏻♂️
This mecanic 👏👏👏
Oh thank you 😊
Should wear mask...
The pouder that come from the cuting is very dangerous
Ausguseneitch Sir
ambagal nkatulog na ko lol
Price
🤑
what's with discarding everything on the floor like it's cinematic? some people just have way too much money 🤢
that cable integration is a nightmare
Hmmm, it's a terrible metamorphosis,
?
🇮🇹🇮🇹🇮🇹🇮🇹🇮🇹
When i have this bike so expensive rb i did not buy that bike😅😅
So sleepy.!!
Take a coffee.
looks mtb due to DBr
vcelku nudné video, ale dobrá práce a parádní kolo. jen tak dál
why is it so pathetic to throw boxes - it's not beautiful at all!
Nice bike…. sloppy mechanic 👎
Ok Thank You 🥲
Very sloppy.