How the Wyrmwood Modular Gaming Table is Made
ฝัง
- เผยแพร่เมื่อ 1 ต.ค. 2024
- 🚨🚨 Modular Table Kickstarter is launching in Europe on September 3rd 2024, 10AM (GMT-4)! www.kickstarte...
This is how we take raw lumber and turn it into a beautiful piece of furniture that the whole family can enjoy. Please visit wyrmwoodgaming... to learn more. Thanks!
Socials:
bit.ly/Wyrmwoo...
Interested in a Modular Gaming table? Sign up for our Mailing List, and we'll send you everything you need to know about the table 🙌:
bit.ly/3tNV3m1
🔥Modular Gaming Table Playlist:
• Modular Gaming Table b...
#MGT #modulargametable #wyrmwoodgaming
![ลองสั่งของจากแอพ temu ถูกจริงหรอ?? [โกงไหมครับ ep.88 ] | DOM](http://i.ytimg.com/vi/RTcZSQTiDZw/mqdefault.jpg)
This was way more PBS-style than I was expecting from Wyrmwood, but I loved watching it! If only Mr. Roger’s could have narrated this
Or Reading Rainbow style LeVar Burton.
At least this one is possible sigh
I think this is matt doing the VO? fuck ima feel like a dick if im wrong
THAT’S the description I was searching for. Yes.
I was thinking Norm McDonald from New Yankee Workshop & This Old House!
Seeing the custom made table leg driller getting used, and the twice damned m&t machine having finished its training arc in this "How it's made" video really shows how long and hard the road has been to get here!
As a fan of How It's made, this is an episode I've wanted from Wyrmwood for the longest time. Awesome look at the process.
and we finally get to see all the new equipment we watched them buy on wyrmlife
Great video on How It's Made. Super high production quality and very information.
Two issues:
- Never showed the inset gaming area section being made for the table. Perhaps we need a Part 2?
- Should the finish sprayers being wearing respirators?
Should the finish sprayers be wearing respirators? Yes. And actual goggles, not just impact=resistant safety glasses. Some of the finishers were complaining that these glasses didn't block the spray from hitting their eyes... These are some of the many violations pointed out in the comments of the Wyrmlife videos where Doug talked about hating safety regulations.
@@TaikoNoTetsujin I have found that OSHA regulations are strict in many cases and surprisingly loose in others (it does not always make sense). I don’t know what the specific rules in this case would be… I am just speaking in broad terms from my experience with warehouse and factory work.
It would be wise to require respirators though, even if it is not a specific rule, to prevent potential lawsuits in the future.
All that said, we may have been getting a staged performance that did not require anything (to which it would have been wise to say so).
They have a very well ventilated room they use for spraying and I think that gives them a false sense of security. Masking saves lungs.
Damn, this is by a wide margin the most professional-looking video Wyrmwood's done.
it's because it's a promotional video made for the MGT updates
Remember a few years ago when they did the video where Doug et. al. were complaining about safety regulations? And the guy at the finishing booth was complaining that the safety goggles weren't stopping the spray from hitting his eyes? And so many commenters pointed out that he wasn't wearing safety goggles, he was wearing impact-resistant glasses which do absolutely nothing in regard to spray? I see not much has changed. (He wasn't wearing any kind of respirator either.)
In an industrial spray booth, respirators or not required or recommended. OSHA requires that the booth fan(s) move at least 100cfm of air per square foot of the filter plenum. They instantly remove any overspray and fumes from the booth. These booths suck out so much air, they actually need specialized HVAC called air make up units to pump fresh air back into the plant. Otherwise the negative pressure would be so great you couldn't open the doors.
I'm surprised I didn't see anyone wearing a mask while sanding or during seal coating... any idea why? Seems like that'd be important to employee health.
Uncomfortable and choose not to? Removed them for shooting? Any number of reasons
Anyone remember the TV show "How It's Made"? This felt EXACTLY like that and was very satisfying to watch :D
Loved this! I found myself going "Its the thing!" whenever I recognized a machine from a wyrmlife ep.
I feel like this could easily get sold to discovery Channel for the how it's made series. Although they would probably need to re dub with crappier music and vo
Nice summary of the streamlined build process. It's been a journey watching it all unfold on Wyrm Lyfe. Congrats on finally being able to fully leverage these economies of scale you have invested in. Here's to MGT 2.0!
How It’s Made; Wyrmwood Edition! ❤
I enjoyed getting to see this different style of Wyrmlyfe video. Awesome to see the whole process through, and how much it has evolved from the early stages.
It's not a wyrmlife video. It's promotional material for the Kickstarter.
@@HonestAuntyElle exactly, wyrmlyfe is this video talking to the people doing it and about 100x longer. we saw them pick up the custom leg machine, we laughed at the terrible setup by the m&t setup person, we went to the manufacturing con to do homework on the timesaver, we fixed the conveyor with dale from the rip saw
@@HonestAuntyElle that's just semantics. This is Wyrmwood's YT channel, where they make bi-weekly videos (usually). During which, they regularly show promotional material, just in shorter formats. This even officially released on their normal Friday Wyrmlyfe timeslot. If calling it "not Wyrmlyfe" makes you feel better, then roll with it. I'll not changing my phrasing.
This was AWESOME!!!! You’ve fully convinced me to just buy it and not try build it myself.
Sounded like Matt (think it was him) has a new career as a V/O artist. Lol. This was fun.
Dangerous move wyrmwood. We now expect this for your entire catelogue, and every project moving forward!
The company sure has come a long way. Great work on the shop and the video!
How the hell do they go from an initial design of a table to this whole process? Figuring out the tooling, the order the machines are run, etc? Seems insanely complex to have to plan this whole thing out. Can't just build a prototype and just say "build it!" Impressive as hell
Well in the beginning, most of these things were done by hand and jigs.
Then they expanded after the Kickstarter to buying these machines to fulfill the orders faster.
testing, process engineering, more testing, adjust process, test again...repeat as necessary
if you watch all of wrymlife (as far back as it goes) you can see a lot of their processes including how they went from figuring out "here's what we want to make" to "here's what we need to buy/do to make it"
Industrial engineering my dude! Usually you start with listing out the processes used to make the prototype, and assign an estimate of how long each process takes and what things can be done in what order. Then, by making a Gantt chart, you visually see where your time sinks are and can start making decisions on what processes can be improved with different machines, and if it makes sense for the volume of work. A lot of the machine decisions are based on your design and could end up changing that very design to accommodate machine limitations, but lots of iterations and planning. And money.... Lots of money lol
Can you make a video like this for every product you make? I like it a lot
As a woodworker myself, and someone very interested in processes and systems, I found this video incredibly fascinating.
Awesome to see your mass production system for the MGT in action. Gives me a lot of confidence that my table will actually arrive on schedule next year. =)
Damn fine video. Loved the coverage of the whole process.
I actually fell asleep watching. 😴😴😴 Gave me Rick and Morty vibes "how a plumbus is made"
I always imagined people building these by hand. What an eye opener!
theyd be fulfilling the first kickstarter for a decade lol
the price would be significantly higher.
In a world where the customer might need a replacement part or want an upgrade, this method is far better.
Programmable machining SHOULD limit a lot of the variables that would be inevitable in a “by hand” production model (the quality of the machines will matter of course). Limiting those variables makes it a lot easier to get correct-fitting new accessories or replacement parts years after the initial purchase.
That said, there is still a decent amount of “by hand” processes in the video, so it probably makes for a nice balance in the process.
Who the heck is the narrator?! Great job!
How come I don't see people wearing dust masks/respirators, particularly while sanding or spraying?
That was amazing to watch, thank you for making it!
The anti-masker in the spray booth. [eye roll]
Love this style of video; How It's Made is one of my favorite shows so this feels nostalgic to watch!
That's a lot of machinery.. no wonder one machine going down can stop production. Love the video style!
Wow! So much work goes into making a table. It makes me appreciate my table that much more. I love my table, so much I wish I had room for another one.
Best episode of “How It’s Made” I have seen in a long time.
Ah the infamous m&t machine. Has that finally found stability?
I still see somewhat regular reports of the mortise and tenon joints not lining up correctly for some people putting their tables together. That and topper bevel issues being another common problem.
6:56 of the video. Notice the complete fubar M&T in that finish stack dead center of the video 2nd from top. Cue the "one of these things does not look like the other..."
Woe is me, I'm a hex so 50% greater chance of getting a part like that!
@@darensommers3309 Given how obviously highlighted it was in the center, it was making me wonder if it was deliberate. Like one end was deliberately different for a different join.
But that really seems like an odd thing to need, so I suspect that could have been an error too, lol.
Edit: I saw it confirmed by people who have their own MGT's that it is definitely an error. So yep, that machine is still a regular issue! lol
@@darensommers3309 id bet operator error, doesn't look like it moved while it was making the tenon or when the hole was bored/drilled, both look like nice clean cuts. very odd to put that into the video and no one noticing it.
It's hilarious to me that the waste produced from the ripper, are all pieces I'd be hoovering up like a kid in a candy store. On the downside, the drive to mass from bc is a little over 3000miles.
cost more for them to repurpose than the material is worth lol
@@mcdotterson4103 from a mass production standpoint, 100%. From a hobbyist woodshop out of my garage - those cutoffs from the ripper are perfect for laminating and using for small projects.
This is a video I've always wanted to exist, I've been very curious as to how these amazing tables get made. Thank you for this video!!
As a gamer and woodworker - I am staggered by the volume of tables made, and the automation to do it.
That is some serious investment of machinery.
thanks for sharing the video.
We need more Matt how its made videos
Ayyy dats me at 3:07
And me at 9:14
Why no respirators while spraying or sanding?
That was fantastic. Simply incredible!
I knew most of this just from watching Wyrmwood since before MGT 1.0. And yet this was so much fun to watch (and so satisfying!).
Living in Australia, and no intentional shipping, I'm one photo of an apron and leg with a ruler away from making my own clone table. This video went a long way towards making my knockoff a reality. Even if I don't have all the fancy machines
@@HonestAuntyElle a little bit of time in sketchup to figure out dimensions and you can easily make this at home with a table saw, trim router, drill and hardware. fancy machines just give you accuracy, repeatability, and speed. YOU CAN MAKE THIS TABLE and i think doug/ian/triscuit man would love to see it happen.
@@HonestAuntyElle If you don’t have any machines, you would probably be better served by hiring a local furniture maker to make your knockoff.
If you just want something that is physically functional and visually acceptable, you might be able to buy or rent some cheap equipment and pull it off (depending on your knowledge of woodworking)… but if you want something approaching the quality of a Wyrmwood product, you will probably want to get a furniture maker involved.
Either way, good luck… and I hope they can work out a viable means of shipping to you someday.
@@Eyrrll I have access to a makerspace locally it's the tenons that look the hardest
@@HonestAuntyElle Mortise and tenons can be pulled off with a table or miter saw with adjustable height, a drill press, and some wood chisels. They can be surprisingly labor intensive and getting a good fit requires some patience.
If you don’t mind gluing your table frame together permanently, there are a few easier options that are not quite as strong, but should be strong enough.
Pocket holes are relatively cheap, fast, and easy, but I would not use them if you are putting a lot of heavy stuff on your table (like tons of Dwaven Forge products). For general gameplay, they should be fine. Pocket holes require a pocket hole jig, specialized drill bits (that should come with your jig kit), and special screws.
Dowels are a bit cheaper but require a bit more work to align than pocket holes (not terribly so)… they use glue and function very similar to a tenon joint, so they are stronger. Dowels will require a jig, dowels, and a normal drill bit.
And actually, you can even use a combination of both pocket holes and dowels if you want to.
Neat
You can see with the two locations, the amount of employees, the materials, and the man hours...... the price of the table appears to be justified.
Now let's see one built with hand tools Jason
Today, on How It’s Made…
Loving the new direction of the channel! Lots of glossing over of things here, can't imagine why. Can't seem to find the last video you posted though...
i had to scroll so far to find this or any mention of it, i thought i was going crazy. i saw mention of it a few days ago elsewhere online but only just now got around to watching some youtube and i guess i missed it :/
This was so good after following the journey of all these machines
Did anyone get the Ad for the Meeples Gaming Table? At 1K they make this claim of having a gaming table for an affordable price. But the product video has definite signs of wear and tear of a table that should have been in pristine condition. They definitely have nothing on Wyrmwood.
1:43 RIP sensor
This was a fantastic video! It was like watching a How It’s Made episode, hight production value. I liked the added animations to help explain some parts. And I defiantly learned more about woodworking ❤
This was a good video and you successfully made something that appeals to a more mass market.
This does not have the normal wyrmlife energy.
so much for Artisan Crafted tables... these are computer creations... sanded by humans... not worth the money at all... id sooner pay a local woodworker to create something for me for these kind of prices... Wyrmwood is dead... RIP
This is why Wyrmwood products are expensive. Lots of care from lots of workers, each making a good salary and a well designed product.
Fun to watch after receiving my order! Been a bit of a wait but excited to unbox and build it tomorrow!
Also gotta say I like how some say that this table is overpriced and not "hand crafted". Takes talented people at all points of the process to make sure the job is done right, sanded and finished by hand. This is American owned and made, with a bow on top for a price no one else does for furniture. I'll edit my post after mine is put together :D.
I worked at a company making high grade decorative hardwood plywood. Seeing the wide belt Time Saver sander took me back. I worked on a machine exactly like that for years.
Would you show your man applying the seal coat some love and give him a mask, so doesn't inhale the aerosoles and get cancer or COPD!?
Otherwise, loved the video! :)
Such a fun video
Great video! I'm curious if the process is the same still. I'm very excited to get my table. I just wish I didn't have to wait 8 months to get it delivered...
This is beautiful
Honestly I have been waiting for this video for years. I like the vlog style stuff, but I want more pure woodworking videos.
These comments are suspiciously positive and generic. One might say, template like lol
I had commented saying that uploading this to distract from the SA video being taken down wasn't a good look, this could have waited a few days. There were 99 comments when I had left my comment. Less than 3 minutes later when I refreshed the page, my comment was gone and there were only 95 comments. They're actively deleting any negative comments.
I was thinking the same thing.....
Cool video.
I have to ask though, why are the seal and final coat sprayers not wearing some sort of respirator?
Thank you for this video! It's so cool to see the scope of your business and the many steps that go into it. One day I hope to get one of these dope tables to be home centerpiece 💜
Love the content
This didn't feel at all like a Wyrmlife or Wyrmwood video for that matter, but it is not unwelcome, and I'm sure targets general audience (non table-top gaming oriented people) much better!
Oof you dont have them were breathing PPE for spraying
How is the bottom of the vault made, and how does the customer do final assembly?
What a fun video thanks guys
This should be classified pornographic content
The lack of PPE on some of the stations (especially finishing) is impressive
You didn't have any footage of the topper off the table....???
Holy macaroni, how many tables you have to sell to be break even?😮😮
What happened to the frank video on Tuesday
that's a badass ripsaw machine!!!
That was fantastic! thanks guys!
Can you do these in black? maybe even bar table height?
well this explains the price of your tables :)
They need to redo this video after they flipped production.
this was awesome to watch!
Totally awesome.
Loved this!
I am looking forward to buying it in Japan!
Where are you guys located? I'm curious if you have any job openings!?
We have Massachusetts and Pennsylvania shops! Please email us at sales@wyrmwoodgaming.com for more info.
Fascinating- nice work!
10:45 One leg is missed in that leg rotaion
Still biggest regret of my life, not backing MGT in round 1 (from down here in Australia)
Here in Aus, a minimum set up of large (maybe it was even medium) table in maple with toppers, no accessories. Was looking like $2000 AUD, shipping included.
In hindsight, this table is 10000% worth it, even if I would still be waiting on delivery! Just guttered I didn’t realise it when I needed to
Fantastic video, and great marketing showing people that their money is so well spent
Thank you for concisely putting all of the tools I want with their functions in a sexy format, now off to plead to my wife, this time with visuals!
Looks like maple wood, nice!
Fantastic!
Amazing vid!
Dang i dint realize your second facility was in Myerstown. That's like an hr away. Keep on being a rad bunch and making awesome products
Dude! This was awesome. Sooooo cool to watch. Amazing quality and editing. My kids watched with me and loved it. Thanks!
Love it! Speaking as a woodworker, and manufacturing engineer for a large office furniture company, this v was captivating.
Fascinating to watch. I'm disappointed that these tables are so expensive with the automation and mass production that should reduce the cost. I've seen tables out there of much better quality that cost less and are each handmade. It is really cool the way they are made, though. I was hoping to see some inspiration for my own handmade table, but that process is way different than what I would do at home.
I’m genuinely curious where you e seen that? I’m a hobbyist woodworker, and even with power tools, this table in cherry would be at least a 30 hour project solo. If I’m paying myself $20/hr, that $600 in labor. Add the 120 board-feet (and 20% waste) at about $550 and that leaves $850 for hardware, finishing, and inventory. I’ve been impressed by their systems, so if you know a better shop that’s cheaper, I’d love to buy from them.
@@JCintheBCC Like I said, their product is way different than I would do at home. If you are looking for a 1-to-1 conversion, there is nobody that does it the same way as this. What kind of table are you looking for? I'll see if I can find one that gets you close.
Great Video, exactly what we needed to see. Next make this for Prophecy, then every other product you have...
Very cool video. It gives an insight into the manufacturing process that is well detailed and informative. Nice job.
OH WOW!
This is AWESOME!
With the format and the voiceover I kept expecting you all to show how you make the Plumbus. th-cam.com/video/SWMGd_rzRdY/w-d-xo.html
Damn I was high while watching this and it was absolutely riveting. I'm gonna go watch How Its Made.
I think you guys accidentally posted your new employee training video 😂