Lol, easier to disconnect the cables from the channel and do a warm start. All devices will become "normal" but you will get channel failure. But easiest way is just to shut off the power from the panel and you will have no troubles at all 🤦
Yea exactly what I was thinking, those devices are still out of service. I’m having the same issue at a site, there’s workers doing renovations and they’re taking detectors down and putting back up after work is done. Some smokes are not restoring to normal and staying in “No Answer”. I’ve tried many things, cleaned contacts, tighten base, ensure dip switches are correct, ensure wiring is correct along with voltage and nothing has worked as of yet. Wondering why they all of the sudden won’t restore to normal and stay in no answer.
Have you checked the batteries? They come up as that but also should have a battery charger/depleted trouble so I’m sure that hasn’t gone over your head. Maybe ground faults? If not try a full panel reset cold start
I’m a 20 year fire alarm tech. Please don’t ever do this ..
Thanks for your tutorial. It was great.
Very good no 1 people
Pls can u make videos on diferent types of troubles like card troubles or Eps abnormal in smplex 4100ES
Video quality is very poor. I can't see anything.
Lol, easier to disconnect the cables from the channel and do a warm start. All devices will become "normal" but you will get channel failure. But easiest way is just to shut off the power from the panel and you will have no troubles at all 🤦
Hello sir can you give more information for Esser IQ8 please
you dodnt clear the panel, all you did is placed it to a temporary install mode folder!! the troubles still remain and require troubleshooting
You happen to know how to clear troubles?
@@mariogca yes, what trouble thr panel indicate
@@tech.channel5381 1st. Roof duct det.
2nd. Rest. Duct det.
@@mariogca Click "more info" or send me picture.. but genneraly it will be on thr bottomright hand side next to the dut smoke
Yea exactly what I was thinking, those devices are still out of service. I’m having the same issue at a site, there’s workers doing renovations and they’re taking detectors down and putting back up after work is done. Some smokes are not restoring to normal and staying in “No Answer”. I’ve tried many things, cleaned contacts, tighten base, ensure dip switches are correct, ensure wiring is correct along with voltage and nothing has worked as of yet. Wondering why they all of the sudden won’t restore to normal and stay in no answer.
This is negligence and can land you in court. Place a service call with Johnson Controls.
But last you take exit from the menu of hiding all the troubles but at least you have to show when all troubles hide and panel shows Normal
Hello
Can you wash me about program addressable panel integlex
If want to release all over hundred disable trouble of signal, is it same case and same way release the signal.🙏🙏
Excellent but vedio not clear
Hw disable sonders &outputs
What to do two alarm active same time? Pls reply
Buzzer continue on .... How to close
This same problem how to sove in simplex 4010
Plz help me how to remove, install mode active abnormal
Hello
Hello
Simplex 4010 OVERCURRENT TROUBLE how i slove plzzz any bady answer?
There's a short in the system. It could be a device that was connected wrong and needs the right contacts.
How to turn off the alarm sound permanently without shutting down the system
You didn’t solve the problem, you just shoved it under the rug.
But where trouble gone it appeared again
I have a common trouble point for node 2 card status fault. Any idea what may be wrong?
Have you checked the batteries? They come up as that but also should have a battery charger/depleted trouble so I’m sure that hasn’t gone over your head. Maybe ground faults? If not try a full panel reset cold start
One minute?
Liar your self,Trouble in system not cleared
It's not an understandable video you didn't show us in last that all the troubles went hide
Very bad camra shoot but you speak good but vidio is not good
This is not healthy